/*
    Copyright (c) 2005-2021 Intel Corporation

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

#include "common/config.h"

#include "tbb/flow_graph.h"

#include "common/test.h"
#include "common/utils.h"
#include "common/utils_assert.h"
#include "common/graph_utils.h"


//! \file test_split_node.cpp
//! \brief Test for [flow_graph.split_node] specification


#if defined(_MSC_VER) && _MSC_VER < 1600
    #pragma warning (disable : 4503) //disabling the "decorated name length exceeded" warning for VS2008 and earlier
#endif

//
// Tests
//

const int Count = 300;
const int MaxPorts = 10;
const int MaxNInputs = 5; // max # of input_nodes to register for each split_node input in parallel test

std::vector<bool> flags;   // for checking output

template<typename T>
class name_of {
public:
    static const char* name() { return  "Unknown"; }
};
template<>
class name_of<int> {
public:
    static const char* name() { return  "int"; }
};
template<>
class name_of<float> {
public:
    static const char* name() { return  "float"; }
};
template<>
class name_of<double> {
public:
    static const char* name() { return  "double"; }
};
template<>
class name_of<long> {
public:
    static const char* name() { return  "long"; }
};
template<>
class name_of<short> {
public:
    static const char* name() { return  "short"; }
};

// T must be arithmetic, and shouldn't wrap around for reasonable sizes of Count (which is now 150, and maxPorts is 10,
// so the max number generated right now is 1500 or so.)  Input will generate a series of TT with value
// (init_val + (i-1)*addend) * my_mult, where i is the i-th invocation of the body.  We are attaching addend
// input nodes to a join_port, and each will generate part of the numerical series the port is expecting
// to receive.  If there is only one input node, the series order will be maintained; if more than one,
// this is not guaranteed.

template<int N>
struct tuple_helper {
    template<typename TupleType>
    static void set_element( TupleType &t, int i) {
        std::get<N-1>(t) = (typename std::tuple_element<N-1,TupleType>::type)(i * (N+1));
        tuple_helper<N-1>::set_element(t, i);
    }
};

template<>
struct tuple_helper<1> {
    template<typename TupleType>
    static void set_element(TupleType &t, int i) {
        std::get<0>(t) = (typename std::tuple_element<0,TupleType>::type)(i * 2);
    }
};

// if we start N input_bodys they will all have the addend N, and my_count should be initialized to 0 .. N-1.
// the output tuples should have all the sequence, but the order will in general vary.
template<typename TupleType>
class my_input_body {
    typedef TupleType TT;
    static const int N = std::tuple_size<TT>::value;
    int my_count;
    int addend;
public:
    my_input_body(int init_val, int addto) : my_count(init_val), addend(addto) { }
    TT operator()( tbb::flow_control &fc) {
        if(my_count >= Count){
            fc.stop();
            return TT();
        }
        TT v;
        tuple_helper<N>::set_element(v, my_count);
        my_count += addend;
        return v;
    }
};

// allocator for split_node.

template<int N, typename SType>
class makeSplit {
public:
    static SType *create(tbb::flow::graph& g) {
        SType *temp = new SType(g);
        return temp;
    }
    static void destroy(SType *p) { delete p; }
};

// holder for sink_node pointers for eventual deletion

static void* all_sink_nodes[MaxPorts];


template<int ELEM, typename SType>
class sink_node_helper {
public:
    typedef typename SType::input_type TT;
    typedef typename std::tuple_element<ELEM-1,TT>::type IT;
    typedef typename tbb::flow::queue_node<IT> my_sink_node_type;
    static void print_parallel_remark() {
        sink_node_helper<ELEM-1,SType>::print_parallel_remark();
        INFO(", " << name_of<IT>::name());
    }
    static void print_serial_remark() {
        sink_node_helper<ELEM-1,SType>::print_serial_remark();
        INFO(", " << name_of<IT>::name());
    }
    static void add_sink_nodes(SType &my_split, tbb::flow::graph &g) {
        my_sink_node_type *new_node = new my_sink_node_type(g);
        tbb::flow::make_edge( tbb::flow::output_port<ELEM-1>(my_split) , *new_node);
        all_sink_nodes[ELEM-1] = (void *)new_node;
        sink_node_helper<ELEM-1, SType>::add_sink_nodes(my_split, g);
    }

    static void check_sink_values() {
        my_sink_node_type *dp = reinterpret_cast<my_sink_node_type *>(all_sink_nodes[ELEM-1]);
        for(int i = 0; i < Count; ++i) {
            IT v{};
            CHECK_MESSAGE(dp->try_get(v), "");
            flags[((int)v) / (ELEM+1)] = true;
        }
        for(int i = 0; i < Count; ++i) {
            CHECK_MESSAGE(flags[i], "");
            flags[i] = false;  // reset for next test
        }
        sink_node_helper<ELEM-1,SType>::check_sink_values();
    }
    static void remove_sink_nodes(SType& my_split) {
        my_sink_node_type *dp = reinterpret_cast<my_sink_node_type *>(all_sink_nodes[ELEM-1]);
        tbb::flow::remove_edge( tbb::flow::output_port<ELEM-1>(my_split) , *dp);
        delete dp;
        sink_node_helper<ELEM-1, SType>::remove_sink_nodes(my_split);
    }
};

template<typename SType>
class sink_node_helper<1, SType> {
    typedef typename SType::input_type TT;
    typedef typename std::tuple_element<0,TT>::type IT;
    typedef typename tbb::flow::queue_node<IT> my_sink_node_type;
public:
    static void print_parallel_remark() {
        INFO("Parallel test of split_node< " << name_of<IT>::name());
    }
    static void print_serial_remark() {
        INFO("Serial test of split_node< " << name_of<IT>::name());
    }
    static void add_sink_nodes(SType &my_split, tbb::flow::graph &g) {
        my_sink_node_type *new_node = new my_sink_node_type(g);
        tbb::flow::make_edge( tbb::flow::output_port<0>(my_split) , *new_node);
        all_sink_nodes[0] = (void *)new_node;
    }
    static void check_sink_values() {
        my_sink_node_type *dp = reinterpret_cast<my_sink_node_type *>(all_sink_nodes[0]);
        for(int i = 0; i < Count; ++i) {
            IT v{};
            CHECK_MESSAGE(dp->try_get(v), "");
            flags[((int)v) / 2] = true;
        }
        for(int i = 0; i < Count; ++i) {
            CHECK_MESSAGE(flags[i], "");
            flags[i] = false;  // reset for next test
        }
    }
    static void remove_sink_nodes(SType& my_split) {
        my_sink_node_type *dp = reinterpret_cast<my_sink_node_type *>(all_sink_nodes[0]);
        tbb::flow::remove_edge( tbb::flow::output_port<0>(my_split) , *dp);
        delete dp;
    }
};

// parallel_test: create input_nodes that feed tuples into the split node
//    and queue_nodes that receive the output.
template<typename SType>
class parallel_test {
public:
    typedef typename SType::input_type TType;
    typedef tbb::flow::input_node<TType> input_type;
    static const int N = std::tuple_size<TType>::value;

    static void test() {
        input_type* all_input_nodes[MaxNInputs];
        sink_node_helper<N,SType>::print_parallel_remark();
        INFO(" >\n");
        for(int i=0; i < MaxPorts; ++i) {
            all_sink_nodes[i] = NULL;
        }
        // try test for # inputs 1 .. MaxNInputs
        for(int nInputs = 1; nInputs <= MaxNInputs; ++nInputs) {
            tbb::flow::graph g;
            SType* my_split = makeSplit<N,SType>::create(g);

            // add sinks first so when inputs start spitting out values they are there to catch them
            sink_node_helper<N, SType>::add_sink_nodes((*my_split), g);

            // now create nInputs input_nodes, each spitting out i, i+nInputs, i+2*nInputs ...
            // each element of the tuple is i*(n+1), where n is the tuple element index (1-N)
            for(int i = 0; i < nInputs; ++i) {
                // create input node
                input_type *s = new input_type(g, my_input_body<TType>(i, nInputs) );
                tbb::flow::make_edge(*s, *my_split);
                all_input_nodes[i] = s;
                s->activate();
            }

            g.wait_for_all();

            // check that we got Count values in each output queue, and all the index values
            // are there.
            sink_node_helper<N, SType>::check_sink_values();

            sink_node_helper<N, SType>::remove_sink_nodes(*my_split);
            for(int i = 0; i < nInputs; ++i) {
                delete all_input_nodes[i];
            }
            makeSplit<N,SType>::destroy(my_split);
        }
    }
};

//
// Single predecessor, single accepting successor at each port

template<typename SType>
void test_one_serial( SType &my_split, tbb::flow::graph &g) {
    typedef typename SType::input_type TType;
    static const int TUPLE_SIZE = std::tuple_size<TType>::value;
    sink_node_helper<TUPLE_SIZE, SType>::add_sink_nodes(my_split,g);
    typedef TType q3_input_type;
    tbb::flow::queue_node< q3_input_type >  q3(g);

    tbb::flow::make_edge( q3, my_split );

    // fill the  queue with its value one-at-a-time
    flags.clear();
    for (int i = 0; i < Count; ++i ) {
        TType v;
        tuple_helper<TUPLE_SIZE>::set_element(v, i);
        CHECK_MESSAGE(my_split.try_put(v), "");
        flags.push_back(false);
    }

    g.wait_for_all();

    sink_node_helper<TUPLE_SIZE,SType>::check_sink_values();

    sink_node_helper<TUPLE_SIZE, SType>::remove_sink_nodes(my_split);

}

#if __TBB_PREVIEW_FLOW_GRAPH_NODE_SET
void test_follows_and_precedes_api() {
    using namespace tbb::flow;
    using msg_t = std::tuple<int, float, double>;

    graph g;

    function_node<msg_t, msg_t> f1(g, unlimited, [](msg_t msg) { return msg; } );
    auto f2(f1);
    auto f3(f1);

    std::atomic<int> body_calls;
    body_calls = 0;

    function_node<int, int> f4(g, unlimited, [&](int val) { ++body_calls; return val; } );
    function_node<float, float> f5(g, unlimited, [&](float val) { ++body_calls; return val; } );
    function_node<double, double> f6(g, unlimited, [&](double val) { ++body_calls; return val; } );

    split_node<msg_t> following_node(follows(f1, f2, f3));
    make_edge(output_port<0>(following_node), f4);
    make_edge(output_port<1>(following_node), f5);
    make_edge(output_port<2>(following_node), f6);

    split_node<msg_t> preceding_node(precedes(f4, f5, f6));
    make_edge(f1, preceding_node);
    make_edge(f2, preceding_node);
    make_edge(f3, preceding_node);

    msg_t msg(1, 2.2f, 3.3);
    f1.try_put(msg);
    f2.try_put(msg);
    f3.try_put(msg);

    g.wait_for_all();

    // <number of try puts> * <number of splits by a input node> * <number of input nodes>
    CHECK_MESSAGE( ((body_calls == 3*3*2)), "Not exact edge quantity was made");
}
#endif // __TBB_PREVIEW_FLOW_GRAPH_NODE_SET

template<typename SType>
class serial_test {
    typedef typename SType::input_type TType;
    static const int TUPLE_SIZE = std::tuple_size<TType>::value;
    static const int ELEMS = 3;
public:
static void test() {
    tbb::flow::graph g;
    flags.reserve(Count);
    SType* my_split = makeSplit<TUPLE_SIZE,SType>::create(g);
    sink_node_helper<TUPLE_SIZE, SType>::print_serial_remark(); INFO(" >\n");

    test_output_ports_return_ref(*my_split);

    test_one_serial<SType>(*my_split, g);
    // build the vector with copy construction from the used split node.
    std::vector<SType>split_vector(ELEMS, *my_split);
    // destroy the tired old split_node in case we're accidentally reusing pieces of it.
    makeSplit<TUPLE_SIZE,SType>::destroy(my_split);


    for(int e = 0; e < ELEMS; ++e) {  // exercise each of the vector elements
        test_one_serial<SType>(split_vector[e], g);
    }
}

}; // serial_test

template<
      template<typename> class TestType,  // serial_test or parallel_test
      typename TupleType >                               // type of the input of the split
struct generate_test {
    typedef tbb::flow::split_node<TupleType> split_node_type;
    static void do_test() {
        TestType<split_node_type>::test();
    }
}; // generate_test

#if __TBB_CPP17_DEDUCTION_GUIDES_PRESENT

void test_deduction_guides() {
    using namespace tbb::flow;
    using tuple_type = std::tuple<int, int>;

    graph g;
    split_node<tuple_type> s0(g);

    split_node s1(s0);
    static_assert(std::is_same_v<decltype(s1), split_node<tuple_type>>);

#if __TBB_PREVIEW_FLOW_GRAPH_NODE_SET
    broadcast_node<tuple_type> b1(g), b2(g);
    broadcast_node<int> b3(g), b4(g);

    split_node s2(follows(b1, b2));
    static_assert(std::is_same_v<decltype(s2), split_node<tuple_type>>);

    split_node s3(precedes(b3, b4));
    static_assert(std::is_same_v<decltype(s3), split_node<tuple_type>>);
#endif
}

#endif

//! Test output ports and message passing with different input tuples
//! \brief \ref requirement \ref error_guessing
TEST_CASE("Tuple tests"){
    for (int p = 0; p < 2; ++p) {
        generate_test<serial_test, std::tuple<float, double> >::do_test();
#if MAX_TUPLE_TEST_SIZE >= 4
        generate_test<serial_test, std::tuple<float, double, int, long> >::do_test();
#endif
#if MAX_TUPLE_TEST_SIZE >= 6
        generate_test<serial_test, std::tuple<double, double, int, long, int, short> >::do_test();
#endif
#if MAX_TUPLE_TEST_SIZE >= 8
        generate_test<serial_test, std::tuple<float, double, double, double, float, int, float, long> >::do_test();
#endif
#if MAX_TUPLE_TEST_SIZE >= 10
        generate_test<serial_test, std::tuple<float, double, int, double, double, float, long, int, float, long> >::do_test();
#endif
        generate_test<parallel_test, std::tuple<float, double> >::do_test();
#if MAX_TUPLE_TEST_SIZE >= 3
        generate_test<parallel_test, std::tuple<float, int, long> >::do_test();
#endif
#if MAX_TUPLE_TEST_SIZE >= 5
        generate_test<parallel_test, std::tuple<double, double, int, int, short> >::do_test();
#endif
#if MAX_TUPLE_TEST_SIZE >= 7
        generate_test<parallel_test, std::tuple<float, int, double, float, long, float, long> >::do_test();
#endif
#if MAX_TUPLE_TEST_SIZE >= 9
        generate_test<parallel_test, std::tuple<float, double, int, double, double, long, int, float, long> >::do_test();
#endif
    }
}

#if __TBB_PREVIEW_FLOW_GRAPH_NODE_SET
//! Test decution guides
//! \brief \ref requirement
TEST_CASE("Test follows and precedes API"){
    test_follows_and_precedes_api();
}
#endif

#if __TBB_CPP17_DEDUCTION_GUIDES_PRESENT
//! Test decution guides
//! \brief \ref requirement
TEST_CASE("Deduction guides"){
    test_deduction_guides();
}
#endif