2016-10-09 Ethan A Merritt PATCHLEVEL etc: Bump versioning to 5.0.5 for release 2016-10-01 Daniel J Sebald * QtGnuplotItems.{h|cpp} (QtGnuplotEnhancedFragment::width): Introduce a true string width function rather than using boundingBox(), which ignores leading or trailing whitespace. This repairs enhanced text overprint and place-holder markup in the qt terminal. Bug #1863 2016-09-27 Ethan A Merritt * src/plot2d.c (eval_plots): Initialize fillcolor. * src/stats.c: Do not use columnheader as a prefix for "stats" unless it is specifically requested. 2016-09-25 Ethan A Merritt * src/pm3d.c (set_plot_with_palette): When checking for plot elements that refer to palette coloring, go through the list of objects also. 2016-09-15 Ethan A Merritt * src/set.c docs/gnuplot.doc: Ignore "set termopt {dashed|solid}". Remove use of this option from the manual. 2016-09-14 Bastian Maerkisch * src/win/wgraph.c (drawgraph): Fix a GDI resource leak which is only important when opening and closing a massive number of different graph windows. 2016-09-13 Ethan A Merritt * src/graph3d.c (setup_3d_box_corners): 2016-09-06 revision to which plot edges have tic labels attached should not have been applied to "set view map" mode. 2016-09-12 Bastian Maerkisch * config/config.nt (HAVE_ERF, HAVE_ERFC, HAVE_STDBOOL_H, isnan EAM_OBJECTS): Version dependent macros to enable compilation with at least VS2012 or newer. * src/win/wgnuplib.rc: Change (nominal) font size of most dialogs to 8pt in order to match Windows default settings. * src/win/wgraph.c src/win/wgdiplus.cpp (W_hypertext): Use the encoding which was active while plotting (not the current one) to display hypertext. * src/win/wgdiplus.cpp: Fix a resource and memory leak. * src/win/wpause.c: Use default GUI font (not the archaic system font). Match the size of the dialog box to the actual length of the message. * src/win/wtext.c (UpdateScrollBars): The size of the scroll bar thumb reflects the length or width of the scrollable area. * src/win/wtext.c: Ctrl-C copies to clipboard if there's selected text or sets the Ctrl-C (break) flag otherwise. * src/win/wgraph.c src/win/wmenu.c: Use TB_ADDBUTTON instead of TB_LOADIMAGES to load standard icons as this somehow eliminates a resource leak. 2016-09-07 Daniel J Sebald * src/graph3d.c (setup_3d_box_corners): Add quandrant processing for surface_rot_x similar to that for surface_rot_z. This fixes inconsistent borders drawn when the base is upside down. Bug #1810 2016-09-06 Ethan A Merritt * src/tabulate.c( imploded ): The smoothing routine cp_implode() creates a new set of plots separated by dummy UNDEFINED points. However data files use a blank line to separate curves. Thus "set table foo; plot ... smooth freq" creates a file foo that is not in standard format, creating problems if it is read back in to plot later. This patch replaces each UNDEFINED point with a blank line when smoothed data is tabulated. Bug #1274 * src/stats.c: In the case of 'stats foo prefix columnhead' check that the string found in the column header is a legal identifier (i.e. rule out numbers and punctuation). 2016-09-03 Ethan A Merritt * src/stats.c: Track and report number of lines treated as column headers rather than as data. * src/show.c: Show state of 'autotitle columnheaders' even if the key is currently unset. * docs/gnuplot.doc: Update sections referring to columnheaders. Note that the effect of `set key autotitle columnhead` extends to stats and fit commands, and applies even if the key is unset. * src/datafile.c (df_open): Guarantee that first line of data is skipped if 'set key autotitle columnhead' is in effect regardless of whether the column headers are used. Bug #1751 2016-09-02 Ethan A Merritt * src/datafile.c (df_generate_pseudodata): Grid coordinates generated by splot '++' are subject to round-off error. This error is most noticeable at the plot boundary, where it may be that (sample_min + nsteps * stepsize != sample_max). This is more likely to be visible on 32-bit systems than on 64-bit systems. Force the final grid coordinate to be exactly sample_max. Bug #1850 2016-09-01 Ethan A Merritt * term/pslatex.trm: The begin/end of plot bookkeeping of internal state that would otherwise be done by PS_layer() needs to be done instead by the replacement routine PSLATEX_layer(). In particular the final line a plot needs to be stroked and the linetype reset. Bug #1852 2016-08-25 Ethan A Merritt * src/wxterminal/wxt_gui.cpp (wxtFrame::OnExport): Revisit the file export widget. I misread the code previously, thinking there was only a single global command list. Actually there is a global pointer but each window has its own command list. So we really can export inactive plots as well as the active plot. The global command list pointer is now unused so get rid of it. Bug #1843 * src/color.c src/set.c src/gadgets.c src/gadgets.h src/tables.c src/tables.h src/save.c docs/gnuplot.doc: New keyword "set colorbox {{no}invert" flips the top/bottom orientation of a vertical gradient; i.e. the same color maps to the same numerical value but the orientation of the sample is inverted. Display of horizontal gradients is not affected. Tracker issue #1808 2016-08-24 Ethan A Merritt * src/plot2d.c (refresh_bounds box_range_fiddling): Improved autoscaling of plots "with boxes". Extend y range to 0. Distinguish between absolute and relative boxwidth. Bug #1827 * src/datafile.h src/datafile.c src/stats.c docs/gnuplot.doc: Rearrange the order in which we parse the "stats" command. This allows passing "columnheader" or "columnheader(N)" to the "name" option rather than a fixed character string. Bug #1841 2016-08-21 Ethan A Merritt * src/wxterminal/wxt_gui.cpp (wxtFrame::OnExport): The Export widget on a plot window should dump a copy of the plot in that window, not a copy of the currently active plot. Modify the OnExport function accordingly. Unfortunately to generate PDF or SVG files we want to reexecute the list of commands that generated the plot, but we only keep such a list for the currently active plot. So Export from inactive windows is limited to the clipboard or PNG files. Bug #1843 * src/readline.c (getc_wrapper): Clear errno before reading next character. This fix contributed anonymously. Bug #1846 2016-08-19 Ethan A Merritt * src/util.c (squash_spaces) src/util.h src/command.c: Modify squash_spaces() utility routine to optionally leave a single space in place of whitespace or remove whitespace altogether. 2016-08-18 Ethan A Merritt * src/eval.c src/eval.h (free_at): afl-fuzz found multiple crashes caused by trying to evaluate a defunct action table. This patch wraps free_at() in a macro that clears the pointer to an action table after freeing it. 2016-08-17 AMD * term/post.trm: Different treatment of simplex/duplex option depending on whether the PostScript support is limited to Level 1. 2016-08-16 Ethan A Merritt * src/misc.c (lp_parse) src/plot2d.c (eval_plots): Remove order dependence of the "fillcolor" keyword and confusion with line style. For example these commands were not working: plot 'silver.dat' with boxes fs solid 1.0 border -1 fc "cyan" plot 'silver.dat' with boxes fc "cyan" fs solid 1.0 border -1 lw 2 2016-08-11 Ethan A Merritt * src/plot2d.c (box_range_fiddling): afl-fuzz found a crash caused by an incorrect test for no data points. * src/set.c (encoding_minus): Comment out replacement of the SJIS minus sign character. The character itself is correct but it is a full-width glyph so it does not mix well with half-width digits in a number. This problem is specific to SJIS. 2016-08-09 Hans-Bernhard Broeker * config/config.oww (ftruncate): Definition needed to compile on Open Watcom. * config/config.nt (HAVE_ERF, HAVE_ERFC, HAVE_STDBOOL_H) (HAVE_STDINT_H, isnan): Update some flage to match current version of MSVC (VS 2015). 2016-08-07 Ethan A Merritt * src/save.c src/set.c src/show.c src/tables.c src/tables.h src/unset.c src/util.c src/util.h src/eval.c docs/gnuplot.doc term/js/canvasmath.js: New command "set minussign" tells gprintf() to use an encoding-specific minus sign character for numeric output rather than the ascii hyphen character produced by sprintf(). UTF-8: Unicode U+2212 "minus sign" CP1252: ALT+150 "en dash" SJIS: 0x817c default: ascii \055 "hyphen" The substitution of minus sign for hyphen is not made during tabular output ("set table") or when the current terminal is a LaTeX terminal. It affects only numbers formatted by gprint(). Other hyphens are not affected even if they are in a gprintf format string. * PATCHLEVEL: increment to 5pre to distinguish test builds from 5.0.4 2016-08-06 Tatsuro MATSUOKA * src/wxterminal/wxt_gui.h: Correct spelling of include file name. Bug #1836 2016-08-04 Ethan A Merritt * term/svg.trm: Better vertical justification of rotated text. * src/qtterminal/QtGnuplotScene.cpp src/qtterminal/QtGnuplotItems.cpp: *.pcf (bitmap) fonts are non-rotatable. Furthermore Qt can die horribly while trying (seen with Qt 5.4.2). To make matters worse, requesting font "Times" may give you the Adobe pcf font Times (perfect name match) rather than a rotatable ttf or odf font like TimesNewRoman. This patch adds style strategy QFont::ForceOutline to forbid selection of a bitmap font. 2016-08-03 Ethan A Merritt * src/datafile.c: Matrix dimensions were not being adjusted to account for subsampling by "every" in the using specifier, so "with image" plots came out mangled. This was a regression from 4.6.6 and 5.0.1. Bug #1835 * src/set.c src/gadgets.h src/plot2d.c demo/rotate_labels.dem docs/gnuplot.doc demo/all.dem: New option `rotate variable` to assign a separate rotation angle for each point in a 2D `plot with labels` using the contents of the 4th entry in the using specifier. plot foo using 1:2:3:4 with labels rotate variable 2016-08-01 Ethan A Merritt * src/unset.c: "unset y2mtics" was clearing the setting for x, not y2. 2016-07-31 Shigeharu Takeno * src/win/wgnuplot-ja.mnu src/win/README.win-ja: Update Japanese menu translations and help text. 2016-07-31 Bastian Maerkisch Backport bug-fixes from 5.1 * src/wxterminal/wxt_gui.cpp: Handle errors when creating a cairo surface. Bug #1621 * win/gnuplot.iss: Enforce inclusion of directory and program group pages since the default changed in Inno setup version 5.5.7. Bug #1831 * src/win/wgraph.c (drawgraph) src/win/wgdiplus.cpp(drawgraph_gdiplus): Missing cleanup of cached point symbols caused a sizeable resource leak. Bugfix. * src/readline.c (fn_completion): Allow filename completion for system commands '!' and after pipe symbols '<', '|'. Bug #1747 * src/readline.c: The return value of the *_getch() functions should be int, not char, in order to avoid confusion between EOF (-1) and (char)0xff. Bug 1558 * src/qtterminal/qtconversion.cpp: Avoid use of isnan() in C++ code. The C++11 standard has it as a function in the std namespace, whereas older compilers provude it as a macro or as ::isnan(). Use (var != var) instead. 2016-07-21 Ethan A Merritt * src/term_api.h: Define TERM_POLYGON_PIXELS. * src/graphics.c (plot_image_or_update_axes): If this flag is set, implement "plot ... with image pixels" using term->filled_polygon() rather than term->fillbox(). * term/qt.trm: Set TERM_POLYGON_PIXELS to avoid aliasing artifacts. 2016-07-19 Jun Takimoto * term/aquaterm.trm: The AQUA_boxfill() routine scales very badly with the total number of rectangles, making it horribly slow when invoked by "plot $foo with image pixels". Set the terminal flag TERM_POLYGON_PIXELS so that the image processing code will call term->filled_polygon() in preference to term->fillbox(). 2016-07-15 Bastian Maerkisch * src/win/wgdiplus.cpp (W_enhanced_text): Apply text color to enhanced text. Bug #1829 2016-07-09 Ethan A Merritt * Bump PATCHLEVEL to 5.0.4 2016-07-08 Ethan A Merritt * src/gadgets.c (write_label): Consolidate code to create a textbox for this label. * term/pslatex.trm: Implement textbox margins for epslatex. Note that textbox margins are undocumented and not yet completely implemented. * src/qtterminal/qt_term.cpp src/qtterminal/QtGnuplotScene.cpp src/qtterminal/QtGnuplotScene.h: Implement textbox margins for qt. * src/wxterminal/gp_cairo.c (gp_cairo_boxed_text): Reduce textbox margin size and linewidth to better match other terminals. 2016-07-05 Ethan A Merritt * src/graphics.c(plot_betweencurves): The filled curve options y=foo, below y=foo, etc were reworked to piggyback on the 'fill between' code by pre-loading ymax with foo on data input. However this mechanism breaks if the curve is smoothed because ymax is lost during smoothing. Revert the case of smooth + filledcurves + y=foo to use the original FILLEDCURVES_ATY1 code. This original rationale (IIRC) was to get better clipping but since we now have good general case polygon clipping perhaps all the piggyback cases should be reverted. 2016-06-22 Ethan A Merritt * RELEASE_NOTES demo/plugin/Makefile.am: Note compiler flags needed to build gnuplot using Solaris SunPro C compiler. Bugs #1786 #1821 2016-06-17 Ethan A Merritt * parse.h plot2d.c plot3d.c: Tracking the wrong iteration variable (iteration_current rather than iteration) caused plot command iteration with a negative increment to fail to iterate at all. E.g. 'plot for [i=9:1:-1] foo' plotted only the single plot with i=9. Bug #1819 * src/mouse.c (do_event): The combination of in-line data and a resize+replot event could result in the program exiting. Use do_string_replot("") rather than do_string("replot"). Bug #1818 2016-06-15 Ethan A Merritt * src/datafile.c (check_missing): Fix test for explicit 'set missing' string in a csv file (previous check assumed the string was followed by whitespace rather than a field separator). 2016-06-14 Ethan A Merritt * src/internal.c (f_word f_words): The implementation of word(string,N) returned the total number of words for any N<0. This was used internally to implement words(string) as word(string,-1) but meant that any N<0 returned an unexpected value to the user. Limit the special case to a single magic value and let all other N<0 return "" as expected. * src/axis.h (ACTUAL_STORE_WITH_LOG_AND_UPDATE_RANGE): Only update axis->data_min/max if the point being stored is INRANGE. Bug #1804 2016-06-12 Daniel J Sebald * src/graph3d.c: Better fix for bug #1809 (placement of xyplane independent of tics or grid lines). 2016-06-09 Ethan A Merritt * src/stats.c: Change most file-reading errors in "stats" to warnings rather than error, so that a script can continue after trying to stat a file the contains bad data. 2016-06-07 Ethan A Merritt * src/graph3d.c: Consistent placement of xyplane regardless of whether tics or grid lines are present. Bug #1809 2016-05-31 Ethan A Merritt * set/set.c (set_palette): Disallow "set palette maxcolors 1" because this causes divide-by-zero errors during color smoothing. Reported originally as an Octave bug https://bugzilla.redhat.com/show_bug.cgi?id=1340660 2016-05-23 Ethan A Merritt * src/datafile.c: partial "every" specifiers are not compatible with image plots. Ignore them when figuring out image dimensions. Bug #1796 2016-05-17 Ethan A Merritt * src/plot3d.c (get_3ddata): Color information from 7-column input to "splot ... with vectors" was stored only for the tail, not the head. Bug #1793 2016-05-16 * term/js/gnuplot_svg.js: Apply screen transform to mouse coordinates, so that browser-mediated changes of scale and origin are accounted for. In particular this handles the case where the size of an svg image is not the same as the object it is embedded in. Note: Old code claiming to handle scrollbars is left in place but may now be counterproductive. 2016-05-13 Bastian Maerkisch * src/fit.c (fit_command): Since memory requirements are linear in the number of datapoints, double max_data if we need to enlarge the internal buffers. Remove the associated message. Feature Request #444. 2016-05-11 Ethan A Merritt * src/graphics.c src/graphics.h src/plot2d.c: Improved handling of boxplot data with multiple "factors" (i.e. category labels). The data is now sorted only once, rather than once per factor. This change was documented as appearing in 5.0.1, but appently was never applied. Bug #1769 * src/graphics.h src/plot2d.c: Add a new field to (struct curve_points). plot->base_linetype holds the original linetype index for this 2D plot, prior to applying variable color, linetypes defined in terms of other linetypes, etc. This allows assigning successive colors or other properties to elements of a 2D plot (e.g. histogram components, boxplot factors). An analogous field splot->hidden3d_top_linetype is already maintained in (struct surface_points) for use by 3D plots. * src/graphics.c src/plot2d.c: In boxplots with multiple component factors, interpret "lc variable" as requesting a new color for each factor. 2016-05-07 Hans-Bernhard Broeker * src/term.h: Move estimate.trm further up, so emf.trm can see it. 2016-05-06 Ethan A Merritt * term/emf.trm: Better (though still not perfect) estimation of the space occupied by a UTF-8 string. Till now each byte in a multi-byte character was being counted as occupying space. Bug #1787 * src/term.h: The above change means that estimate.trm must be included earlier in term.h than emf.trm. Bump it to the top. 2016-05-04 Ethan A Merritt * src/save.c: "rotate parallel" was not being saved correctly. 2016-05-01 Matthew Halverson * term/svg.trm: Do not flag svg terminal as TERM_BINARY. 2016-04-27 Ethan A Merritt * src/fit.c (call_gnuplot): More robust handling of undefined value returned by function being fit. 2016-04-20 Ethan A Merritt * src/graphics.c (process_image): There are two paths through the code that extracts image data from an ascii input stream, depending on whether the x or y coordinate varies fastest. The fix for Bug #1767 corrected one path but broke the other. I.e. none of version 5.0 patchlevels 0-3 worked correctly on all image input. Now we fix the broken path so that all cases are working, at least on test data. Bug #1782 2016-04-16 Ethan A Merritt * src/graph3d.c (get_arrow3d): Fix typo introduced in 5.0 that caused arrows defined by "from ... rto ..." to be mangled in 3D plots. * src/graphics.c (attach_title_to_plot): Bad things happen if you try to attach a title to the end point of a plot with no points (NODATA). 2016-04-15 Shigeharu Takeno * src/term.c: Windows requires mode "wb" for pipe output, BSD requires "w" (no "b" character), linux will accept either. Bug #1756 2016-04-14 Ethan A Merritt * src/graphics.c (clone_linked_axes): Backport cleanup of tests for consistency of forward/reverse mapping functions in a 'set link' command so that spurious warnings are not generated at runtime. Bug #1777 2016-04-11 Ethan A Merritt * src/plot2d.c (refresh_bounds): Patch from 2016-01-18 to fix bug #1709 introduced a regression. Minimal example: 'set log x; plot '-'; replot' failed to delog/log the updated min/max axis limits. Bug #1774 2016-04-06 Ethan A Merritt * term/emf.trm: Enhanced text mode was over-zealously skipping new set_font requests if successive writes requested the same font+property. This caused it to lose italic/bold/etc properties. Prevent this by clearing the font history at the end of each enhanced text write. Bug #1772 2016-04-04 Ethan A Merritt * src/graphics.c (process_image): There is not currently a fool-proof mechanism for inferring image dimension from a set of x/y/z coords read as ascii data. But we can do better than transposing the row/column count by mistake. Note that this same transposition was previously fixed for the case of ascii matrix data input (Bug #1654) Bug #1767 2016-03-31 Ethan A Merritt * src/history.c (add_history): The documentation states that "set history N" will save N lines on history to a file on program exit. This is true in practice for both the readline-based history code and the built-in history code. However the builtin code also truncates and renumbers the active history list in the current session. This makes the numbers essentially useless once the list reaches N entries. Remove this unwanted secondary effect in the built-in version. Bug #1763. 2016-03-22 Bastian Maerkisch * config/mingw/Makefile win/gnuplot.iss: Support MSYS2/Mingw-w64 as well as MSYS/MinGW and compilation using clang. Ability to build 64bit or 32bit zip package and installer. New make flags MINGW64, CLANG, COLOR-GCC, and M32. Default to 64bit builds when using Mingw-w64, use M32 flag to select 32bit builds. * src/win/wcommon.h src/win/wgdiplus.cpp src/win/wgnuplib.h src/win/wgraph.c: Fix several issues found by clang, with the most important being wrong delete's in wgdiplus.cpp. * scanner.c (get_num): strtoll() on Windows may consume zero characters causing an infinite loop for the input "0x". Bug #1745 * src/win/wgraph.c (MakeFonts, TryCreateFont): Do not rely on GDI supplying a sensible substitute when a requested font is not available. Instead, fall back to the user-supplied default font or the terminal's default font if the former is not available. Bug #1669 * src/wxterminal/wxt_gui.h: Use local events to avoid warnings about incompatible linkage on Windows. 2016-03-21 Ethan A Merritt * src/datafile.c: df_fgets() change from 4 days ago caused a regression because input buffer initialization was missed in some paths. Replicate the initialization in both df_gets() and df_fgets() Rename the shared line buffer df_line to make it more obvious. It would be better to have a single initialization routine df_init() called once on program entry. Bug #1758 * src/graphics.c (do_plot plot_points): The "dots" plot style is implemented internally as pointtype 0, although this was never stated in the documentation. Apparently some users discovered and used pointtype 0 routinely and were unhappy that it stopped working in version 5. Neither the original behavior nor its removal was intentional, but it is easy enough to restore the pre-version 5 behaviour so here we do so. Bug #1733 2016-03-18 Ethan A Merritt * src/graphics.c (plot_boxes): Backport fix to prevents array overrun if there are undefined points are at the end of a data set. * src/datafile.c src/datafile.h src/datablock.c: There was already a routine df_gets() in datafile.c that safely reads in an arbitrary length line of data. Split this into a public function df_fgets() and a private wrapper df_gets(). Share the public function with data input in datablock.c:datablock_command. This removes the limit of 1024 characters per line read in to a datablock. Bug #1757 2016-03-17 Ethan A Merritt * src/plot2d.c: If pointtype PT_CHARACTER is the default for a plot then allow text options like "tc rgb 'foo'" in the plot command. 2016-03-15 Ethan A Merritt * src/qtterminal/qt_term.cpp: Revise "set term qt close" so that 1) It closes window with id N but leaves the current window id unchanged 2) It executes the command immediately rather than queueing it Bug #1753 * src/qtterminal/QtGnuplotWindow.cpp: Do not set the DeleteOnClose attribute of plot windows. This avoids an error message if you send a new plot after explicitly closing the current plot window. Bug #1753 #1554 2016-03-09 Allin Cottrell * configure.in: Backport configuration tweak for wxt on OSX. Do not assume that wxwidgets uses the gtk2 toolkit. It might use gtk3 or on OSX it might use cocoa. * term/aquaterm.trm: Incorrect argument type to abs() or fabs(). 2016-03-05 Ethan A Merritt * src/wxterminal/gp_cairo.c (gp_cairo_set_linewidth): Change the minimum linewidth supported by pdfcairo to match the other cairo terminals. Reduce it for all of them to 0.20 pt (was 0.25 or 0.50). 2016-03-01 Ethan A Merritt * graphics.c (map_position_double): Fix stupid typo that tried to map a linked y axis through the x mapping function. This always mis-placed objects and labels whose position is given in terms of y2 whenever y2 is linked to y1. Furthermore placement on either x2 or y2 could be wrong if the most recent plot did not use that same linked axis. Multiple bugs including #1777 2016-02-22 Release 5.0.3 2016-02-13 Bastian Maerkisch * config/mingw/Makefile: Use gnuplot's default settings to generate plots for the documentation. Use MinGW's own implementations of printf etc. which are C99 compliant. * src/qtterminal/qt_term.h src/qtterminal/qt_conversion.cpp: isnan() is in namespace std. -- Reverted since not all relevant compilers follow the C++11 standard just yet. * src/win/wtext.h: Avoid warnings about the re-definition of popen/pclose with fake pipe support using MSYS2/Mingw-w64. * src/wxterminal/wxt_gui.cpp|h: Fixes to make the wxt terminal work with wxWidgets 3 on Windows: 1) Disable wxWidgets debug assertions in release builds. This does not solve the problem with a setlocale(LC_ALL, NULL) == "C" test in wxLocale, but at least gets rid of the warning. 2) Flush the cairo surface before blitting the internal bitmap to screen. * src/win/wgraph.c: Include direct.h for _chdir(). * term/tkcanvas.trm (TK_init): TK_image requires WRITE_PNG_IMAGE to be defined. 2016-02-12 Jun Takimoto * term/tkcanvas.trm: More fixes suggested by clang warning messages. 2016-02-11 Anton Gladky * term/tkcanvas.trm: Replace statements of the form fprintf(gpoutfile, string) because they trigger a compiler warning/error with -Werror=format-security. 2016-02-11 Bastian Maerkisch * term/wxterminal/wxt_gui.cpp (wxt_raise_window): On Windows, only Restore() the window if it is iconized. Fixes accidental resize of maximized windows. * term/tkcanvas.trm (TK_vector): Fix for vector commands without preceeding move as e.g. in "with line lc variable". * src/fit.c: Fix order of using specs printed to log-file. Bug #1657 2016-02-10 Ethan A Merritt * src/stats.c: Reset data input mode to 2D at start of stats command. This produces consistent results for "stats FOO matrix", even if the previous command was "splot". Bug #1739 2016-02-04 Ethan A Merritt * src/version.c PATCHLEVEL configure.in docs/titlepag.tex: Update patchlevel to 5.0.3 2016-02-04 * src/gadgets.c (clip_line): Use (double) rather than (int) for intermediate coordinates used in line clipping. Bug #1614 2016-02-04 Joachim Wuttke * term/tkcanvas.trm: Replace old (pre-1999) tkcanvas.trm with a rewrite from Joachim Wuttke and Bastian Maerkisch This new driver has only partial support for scripting languages other than tcl and has incomplete support for image data, but it is strictly better than the 1999 terminal. 2016-02-03 Ethan A Merritt * src/graphics.c (finish_filled_curve): The routine fill_between() passes in an extra-long array whose last element stores above/below flag. We must not try to test this flag on other processing paths because for them it is an out-of-bounds access (found by valgrind). 2016-01-31 Ethan A Merritt * src/wxterminal/wxt_gui.cpp: Another pair of fixes for wxt font processing. Prevent a memory leak from temporary storage of the fontname. Initial font used by enhanced text processing should be the most recently set font, not the original one from "set term". 2016-01-28 Ethan A Merritt * src/graphics.c (plot_filledcurves): Reevaluate variable fill color for every polygon in the input stream to "with filledcurves". This change was noted in the ChangeLog for 15-Jan-2015 but apparently was not actually applied to the code. Bug/Feature Request #411 2016-01-26 Jun Takimoto * term/wxt.trm: Previous fix for parsing font "name,size" was incorrect. Bug #1731 2016-01-25 Ethan A Merritt * src/qtterminal/QtGnuplotScene.cpp: Only toggle plots on left-click (not center- or right-click). * src/qtterminal/QtGnuplotScene.cpp: Use explicit color Qt::lightGray to gray out toggled key entries. 2016-01-18 Ethan A Merritt * src/term_api.h src/gadgets.h: Move definition of struct t_image from term_api.h (no terminals use it) to gadgets.h (2D and 3D plots). * src/datafile.c src/graphics.c (plot_image_or_update_axes): Remove old code that tried to empirically determine the grid size of an image based on 3D coords. Backport v5.1 bookkeeping that stores dimensions in plot->image_properties.{ncols,nrows} when image data is read in. * src/plot2d.c (refresh_bounds): The intent of this routine is to keep the previous axis range if the user has not changed autoscale settings. It wasn't working. I'm not sure the revised code is doing quite the right thing either, but at least it correcly handles Bug #1709. These changes are back-ported from version 5.1 to address Bugs #1607 #1703 #1709 #1718 2016-01-17 Ethan A Merritt * term/wxt.trm (wxt_options): Fix regression, fontsize ignored if it is the only thing in the requested font string (e.g. font ",12"). Bug #1731 2016-01-12 Jun Takimoto * term/aquaterm.trm: Add support for version 5 custom dashtypes. 2016-01-09 Ethan A Merritt * src/parse.c src/parse.h src/plot2d.c src/plot3d.c src/set.c src/unset.c demo/iterate.dem docs/gnuplot.doc: New special case of iteration in a plot command: plot for [i= : *] datafile ... This will iterate over all available data without generating an error message when the data is exhausted and without generating empty plots. It can be used to iterate over an unknown number of columns (e.g. for histograms), an unknown number of datafiles where the file name is generated from the iteration variable, or an unknown number of data blocks (e.g. plot for [i=0:*] datafile index i). 2016-01-09 Ethan A Merritt * src/qtterminal/qt_term.cpp: "set term qt title 'foo'" was incorrectly changing the title of the previous plot window in addition to that of the new plot window. 2016-01-06 Release 5.0.2 2015-12-31 Ethan A Merritt * term/post.trm (PS_dashtype): Prevent overflow of the custom dash pattern array, leading to possible corruption of the output postscipt file. * src/set.c src/show.c src/term.c: New command "set mono linetype cycle N" acts analogously to "set linetype cycle N". If a monochrome linetype N is requested where N is larger than any defined monochrome linetype, then substitute a corresponding linetype in the range [1:cycle]. 2015-12-30 Ethan A Merritt * src/term_api.h src/term.c src/set.c (init_monochrome): Move this routine from set.c to term.c * term/lua.trm: Treat "set term tikz monochrome" as "set term tikz; set monochrome". 2015-12-29 Ethan A Merritt * src/show.c: Show current state of "set monochrome" option. * src/unset.c (unset_monochrome): Clear monochrome flag in current term. * src/misc.c (parse_dashtype lp_parse) docs/psdoc/ps_symbols.gpi: Allow "dashtype 0", which is treated as LT_AXIS. Modify ps_symbols demo script to select dashed lines using version 5 syntax ("dashtype N") rather than version 4 syntax ("linetype N"). Bug #1724 2015-12-27 Ethan A Merritt * src/qtterminal/qt_term.cpp (qt_waitforinput): This routine is called to receive both external (e.g. mouse) events and input from stdin. In cases where we only care about events we must not perturb the state of stdin. One such case was missed, leading to a character being dropped from the stdin stream depending on event timing. Bug #1559 2015-12-24 Jun Takimoto * src/qtterminal/QtGnuplotScene.cpp: On Mac OS X, the Qt::KeypadModifier bit of event->modifiers() is *always* set when an arrow key is pressed. 2015-12-23 Ethan A Merritt Bump PATCHLEVEL 2 in preparation for incremental release 5.0.2 2015-12-18 Ethan A Merritt * src/save.c (save_variables__sub): Do not write ARGn variables to save file. 2015-12-01 Ethan A Merritt * src/plot2d.c: Allow "noautoscale" keyword for 2D function plots. 2015-11-09 Ethan A Merritt * src/axis.c src/axis.h src/graphics.c src/save.c src/set.c src/show.c src/unset.c: The documentation says that "set tics `front` or `back` controls whether the tics are placed behind or in front of the plot elements". This was sort of true but it did this by moving the entire grid along with the tics, so you could not entirely place the tics and tic labels in front of the grid lines. Decouple these two operations so that `set tics {front|back}` does only what it is documented to do. Bug #1704 * src/axis.c (gen_tics): "set {*}tics rangelimit" applies to minor tics as well as to major tics. Bug #1705 2015-11-06 Jun Takimoto * src/wxterminal/gp_cairo.c: Fix longstanding bug in vertical alignment of text fragments in cairo terminals (including wxt). Text containing superscripts was placed too low; text with subscripts too high. This is corrected by a query to pango_layout_get_baseline(). Bugs #1319 #1586, probably others 2015-10-31 Ethan A Merritt * src/util3d.c src/util3d.h (edge3d_intersect two_edge3d_intersect): Change parameters to (coordinate *) rather than (array, index) so that the same routines can handle clipping 3D vectors that are not stored as successive entries an array. * src/graph3d.c src/plot3d.c: Support "set clip {one|two}" for 3D vector plots. * src/datafile.c (df_set_key_title): Use of columnheader(N) could sometimes leave an extraneous character '@' in the plot title. This was introduced in 5.0.1 as a sideeffect to the fix for Bug #1596. 2015-10-28 Ethan A Merritt * src/interpol.c (mcs_interp): Handle log-scaled y axis when using monotonic cubic splines ('smooth mcs'). * src/plot2d.c (boxplot_range_fiddling): Fix autoscaling of x axis if there are multiple boxplots with factors. Bug #1696 * src/graphics.c (plot_points plot_boxplot): Declare and initialize p_height and p_width locally (no code was updating the global copy). This fixes nonfunctional "set clip points" command in version 5. * src/boundary.c (do_key_layout) src/graph3d.c (boundary3d): Remove reference to p_height, p_width. 2015-10-22 Ethan A Merritt * src/time.c (gstrptime): Fixes a bug in processing time input using format "%s". Because time input can cross whitespace between fields, the string being parsed for one field may continue on into the next field. The "%s" code looked for the first decimal point in the string, but would read beyond the current field to find it, causing an erroneous fractional second to be added to the input time value. * src/term_api.h term/post.trm src/graphics.c (plot_border) term/PostScript/prologue.ps term/PostScript/prologues.h: This change addresses a backward-compatibility issue with the postscript terminal in version 5. The long ago original postscript terminal used a double-width line for the plot border. This was what you got when you specified "lt -1" in a gnuplot command. All terminals agree that lt -1 is black and solid, but postscript is anomalous in thinking that it has double width. Furthermore postscript is anomalous in applying the current line width to draw dots (pointtype 0). This meant that dots drawn with lt -1 were twice as big as dots drawn with other linetypes. We could just get rid of the double-width anomaly, but then new plots would have a thinner border than old plots produced with the same script. This patch instead adds a layer flag TERM_LAYER_BEGIN_BORDER so that the postscript terminal can temporarily use new style LTB rather than LTb. All other terminals will ignore it. Bug #1689 and others 2015-10-16 Abhijin Adiga * term/lua/gnuplot-tikz.lua: Truncate term->h_char using math.floor(). This prevents text placement errors on OSX 10.10.2 with lua5.3. Bug #1682 2015-10-09 Ethan A Merritt * src/set.c (parse_label_options): Only the full word "boxed" is acceptable as a label option. Allowing the shorthand "box" causes confusion in other commands with a "box" option. Bug #1681 * src/interpol.c (cp_implode): Fix bug in "smooth cnorm" that has been there since the option was first introduced. 2015-10-06 Ethan A Merritt * src/set.c (set_obj): "set obj N polygon ..." failed to consume all possible options and keywords. Bug #1680 2015-10-01 Ethan A Merritt * src/datafile.c (df_readascii): The test intended to check whether the user requested more than 7 columns of formatted input has always been incorrect for 'splot'. It tested against MAXDATACOLS rather than the actual number of requested columns. The test worked but was redundant for 'plot' since requesting more than 7 columns will trigger another error message "too many columns for requested style". Remove the test. Bug #1675 2015-09-25 Ethan A Merritt * src/boundary.c (do_key_sample): Use the same arrowhead style in the key sample as used by the plot itself. 2015-09-18 Ethan A Merritt * src/graphics.c (plot_boxplot): Fix overrun if no valid points are found for some boxplot category (a.k.a. "level"). Fix incorrect clipping of outliers in zoomed boxplot. 2015-09-15 Mojca Miklavec * term/lua.trm: lua 5.3 deprecates luaL_checkint() Bug #1672 2015-09-11 Akira Kakuto * src/help.c term/lua.trm: #ifdef _WIN32 '\r' is accepted as a terminator after a prompt. 2015-09-04 Ethan A Merritt * src/plot2d.c: For 2-column data plots with filledcurves, treat y= as if it were provided in the 3rd data column. Bug #1568 2015-08-31 Jun Takimoto * src/wxterminal/wxt_gui.cpp: Reset "yield" interlock on ctrl-C. Prevents endless futile loop with single-threaded wxt terminal. 2015-08-30 Ethan A Merritt * src/wxterminal/wxt_gui.cpp: Remove FPRINTF statements referring to a stopwatch timer that no longer exists. 2015-08-28 Ethan A Merritt * src/wxterminal/wxt_gui.cpp (wxt_waitforinput): The single-threaded code path used by OSX and Windows (and optionally linux) was not honoring "pause mouse ..." commands, including "pause mouse close". * src/wxterminal/wxt_gui.cpp (wxt_exec_event): The single-threaded code path could lose an input character that arrived during a "pause mouse" interval. Use ungetc to push a character back onto the input queue in this case. (Not applied for Windows but maybe it should be?) 2015-08-25 Ethan A Merritt * src/datafile.c (plot_option_index): Sanity check that index >= 0. * src/datafile.c (df_determine_matrix_info): "skip" option applies to records at the start of ascii matrix data as it does for normal ascii files. 2015-08-24 Ethan A Merritt * src/datafile.c (df_readascii): The code supporting an input format assumed that the data being interpreted came from a file rather than using whatever string was returned by df_gets(). E.g. this failed plot $datablock using 1:2 "format-string" Bug #1666 2015-08-24 Dima Kogan * src/datafile.c (df_open): Syntax "<&N" plots data read from an arbitrary file descriptor, but that descriptor may be a pipe (non-seekable) rather than a true file (seekable). If the fd is not seekable, mark it a "volatile" so that gnuplot doesn't try to reread it on "replot". 2015-08-21 Ethan A Merritt * src/graphics.c (map_position_r): There is no way to indicate "no offset" as opposed to "offset 0", which was causing problems if "offset 0" was applied as axis coordinates on a log-scaled axis. Now in 2D "offset 0" is interpreted as no offset even for log-scaled axes. 3D offsets are still a sore point. Bug #1662 2015-08-18 Ethan A Merritt * src/qtterminal/QtGnuplotEvent.cpp src/qtterminal/qt_term.cpp: Make the error messages from a broken connection to gnuplot_qt less alarming. No change in functionality. See Bug #1554 * src/qtterminal/qt_term.cpp: Use fprintf(stderr, ...) instead of qDebug() << ... for the inboard driver. This allows allows Windows to catch error messages by the redefinition of fprintf in wtext.h. See Bug #1554 2015-08-14 Ethan A Merritt * term/dumb.trm src/stdfn.h: Handle UTF-8 encoding so long as each printed glyph occupies only one character cell. The code is specific to UTF-8; i.e. it does not handle other multi-byte encodings. Bug #1477 2015-08-12 Ethan A Merritt * src/datafile.c (df_generate_pseudodata): The sampling coordinates generated by pseudofiles '+' and '++' were passed as an ascii string, which truncated precision to 6 digits (default for format %g). Now pass in parallel the original (double) value so that no precision is lost. Bug #1650 2015-08-07 "Jun T." * term/aquaterm.trm: Failure to save+restore original color was causing successive fill areas to become more and more transparent. Alsi, make background color pure white. 2015-08-05 Ethan A Merritt * src/parse.c (string_or_express): Prevent an empty string variable or expression from being interpreted as the magic names '' or "". E.g. file1 = 'real-file' file2 = "abc"[3:0] # any expression that evaluates to '' plot file1,file2 # plots file1 twice, no error message Bug #1660 2015-08-03 Ethan A Merritt * src/util.c (streq): Avoid buffer underrun on empty string. * src/axis.c (load_range): "set [xyz]range" per se does not care if the range limits are extremely large, e.g. xrange [ -inf.0 : inf.0 ] but other places in the code do not handle this cleanly. Limit the range to +/- VERYLARGE 2015-08-02 Akira Kakuto * src/qtterminal/qt_term.cpp: Fix #ifdef block syntax, modify string concatenation to make it acceptable in VS2010. 2015-08-02 Hans-Bernhard Broeker * src/Makefile.am (GNUPLOT_QT) [BUILD_QT]: New variable to communicate optionally transformed name of gnuplot_qt into main to main executable. (AM_CPPFLAGS) [BUILD_QT]: Pass GNUPLOT_QT to the preprocessor. (clean-demo) [BUILD_QT]: Fix copy-paste-edit oversight. * src/qtterminal/qt_term.cpp (GNUPLOT_QT): If not defined from outside, provide fall-back definition equal to previously hardcoded value. (execGnuplotQt): Untangle the conditionals a bit. Use new macro GNUPLOT_QT for the name of the outboard driver executable (fixes SF bug #1652) * term/pslatex.trm [!EAM_BOXED_TEXT]: Remove empty fallback definition for new entry function. Remove extraneous optional terminal API entry. 2015-08-01 * configure.in: latest Qt5 requires compilation with -fPIC rather than -fPIE. Bug #1616 2015-08-01 Ethan A Merritt * src/stats.c src/set.c src/eval.c: Protect against 'free(foo); foo = try_to_get_string()' returning via int_error() and hence never resetting the value of foo. If executed again this leads to a double-free error. * src/parse.c (next_iteration): protect against user corrupting iteration variable. E.g. either of these used to segfault plot for [n=1:2] x lw n='foo' do for [n=1:2] { n="foo" } * src/plot2d.c src/plot3d.c src/set.c: Do not allow function plots to specifc an image style (with image/rgbimage/rgbalpha). * src/plot2d.c (eval_plots) src/plot3d.c (eval_3dplots): Example of bug: plot for [i=1:3] T=sprintf("%d",i),i title T previous code evaluated the definition three times and only then make [one] plot. After this fix the code executes define+plot three separate times. * src/command.c (plot_command splot_command): Fuzz-testing found cases where 'refresh' triggered program failure if there was not an active refreshable plot. 2015-07-14 Ethan A Merritt Handle various cases of unexpected input commands or data that caused crashes in fuzz-testing. * src/datafile.c (df_open): Filename of the form "+file.dat" must not be mistaken for special file '+'. * src/wxterminal/wxt_gui.cpp term/cairo.trm term/wxt.trm: Change fixed-length fontname storage to dynamic (cairo + wxt terminals). * src/datablock.c: The storage in a zero-length datablock was not initialized. * src/set.c (set_style) src/save.c (save_data_func_style): Do not allow "set style func parallelaxes" 2015-07-12 Ethan A Merritt * src/command.c (bind_command) src/mouse.c (bind_fmt): Very old bug (pre v4.0) in parsing the bind command, such that bind X" some longish command" would corrupt memory. 2015-07-11 Christoph Bersch * term/epslatex.trm: enable dashtype processing 2015-07-11 Hans-Bernhard Broeker * demo/imageNaN.dem: Fix broken command in demo. 2015-07-11 Ethan A Merritt * src/set.c (load_tic_series): Incorrect nesting of brackets caused "set xtics 0" to be accepted rather than rejected. This could lead to various bad outcomes (as found by fuzz-testing). 2015-07-08 Ethan A Merritt * term/estimate.trm: Initialization of enhanced text string buffer. Bug #1648 * src/set.c src/fit.c src/term.c src/parse.c term/cgm.trm term/gd.trm term/x11.trm: Fuzz-testing found a recurring pattern of fragile code: if (isstringvalue(c_token)) foo = try_to_get_string(); /* cannot fail */ Unfortunately it _can_ fail if an expression begins with a quoted string but is coerced into returning a numerical value. All of these sites require a specific check for (foo != NULL). Bug #1649 2015-07-05 Ethan A Merritt * src/wxterminal/gp_cairo.c (gp_cairo_set_dashtype): If the dashtype is changed then the current path must be stroked and reopened. 2015-07-02 Ethan A Merritt * src/graph3d.c: An incorrect test for variable color was used for splots with impulses or points. Replace it with a shared correct test in check3d_for_variable_color. Note: Binary plots can still set an incorrect flag plot->pm3d_color_from_column but this flag is no longer sufficient to cause the observed problem. Bug #1644 * demo/html/webify.pl: Default to pngcairo terminal rather than png. 2015-06-28 Hans-Bernhard Broeker * src/Makefile.am (gnuplot_x11_SOURCES): Add getcolor.c/.h to regular source list. (gnuplot_x11_CPPFLAGS): New, to communicate compiler flag into getcolor.c. (gnuplot_x11_LDADD): Remove manually created getcolor_x11.o file. (getcolor_x11.o): Rule Removed. * docs/Makefile.am (noinst_PROGRAMS): Add doc2wxhtml. (MOSTLYCLEANFILES, CLEANFILES): Split up into two lists, updated. (GNUPLOT_EXE, SRC_VERSION_O): New variables, point to freshly built files in main src directory. ($(GNUPLOT_EXE), $(SRC_VERSION_O)): Build , if not already present. (grotxt, grodvi, grops): Turn into proper phony targets: depend on the file actually built, do nothing themselves. (troff, gnuplot.nroff, gnuplot.txt, gnuplot-groff.dvi) (gnuplot-groff.ps): Must depend on titlepag.ms in srcdir, not builddir. Use automatic make variables to simplify. Changed build of gnuplot.ms allows to remove complications for out-of-tree builds. (gnuplot.ms): Call doc2ms with new argument to ease out-of-tree builds. (alldoc): Target 'ms' no longer exists. Test actual outputs made from gnuplot.ms instead. (gnuplot.tex, pdffigures, figures, nofigures, pdffigures.tex): Rules removed. Having different rules produce files of the same name, but with different content depending on the order of make targets built, cannot possibly work. (figures.tex, nofigures.tex): Keep two different versions of gnuplot.tex in different-named files. (pdf_figures, wxhelp_figures): New targets to handle generation of figures for use. (gnuplot.tex): Now just a link to (or copy of) nofigures.tex. (gnuplot.pdf, nofigures.pdf): Create pdffigures.tex on-the-fly, because its content cannot be assumed correct any other way. (dvi): Re-enabled. (gnuplot.dvi, gnuplot.pdf, nofigures.pdf, gpcard.dvi): Must depend on titlepag.tex and toc_entry.sty in srcdir, not builddir. (gnuplot.htb): Add necessary dependencies, some of them in srcdir. (htmldocs/gnuplot.html): Do not try to build if latex2html was not found. * configure.in: Check for existence of latex2html. * docs/doc2ms.c (main, init): Add optional argument giving the location of titlepag.ms to be put into the file. This way the file can be processed by roff tools as-is, without having to patch it on-the-fly. 2015-06-26 Ethan A Merritt * src/qtterminal/QtGnuplotItems.dpp (drawPoint): The "dots" style was inadvertantly made a no-op by change on 2015-02-15. 2015-06-23 Ethan A Merritt * src/mouse.c (do_event) src/command.c (replotrequest): An attempt to zoom or scroll the output from a "test" command could produce useless error messages on the console. Now it will revert to the previous plot command, if any. Bug #1627 2015-06-20 Hans-Bernhard Broeker * src/util.c (gprintf): 'L' had broken if-else since 2010; 'B' was missing handling for power zero; 'B' had problem with excess precision. 2015-06-15 Daniel J Sebald * src/term.c (test_term): Use of unsigned terminal coordinates could cause overflow and jam up display of very small plots in x11 terminal. Bug #1626 2015-06-15 Ethan A Merritt * src/graphics.c (plot_boxes): Autocalculation of box widths was bad whenever a NaN data value was encountered. Now such data points are ignored, as they were in version 4. Bug #1623 2015-06-14 Daniel J Sebald * src/term.c (test_term): Dashtype sample labels displayed by `test` were off by one. 2015-06-07 Release 5.0.1 2015-06-05 Hans-Bernhard Broeker * src/fit.c (fit_command): If there's exactly one more range in a 'fit' command than there are independent variables, that last range has to be applied to the dependent variable (a.k.a. "function"). 2015-06-03 Ethan A Merritt * src/util3d.c (draw3d_line_unconditional polyline3d_next): Do not reset line properties for each component line segment in a contour line. This improves the dash-pattern rendering for contours. Bug #1612 2015-05-31 Jun-ichi Takimoto * src/qtterminal/qt_term.cpp: Mouse coordinates must be passed to the clipboard as a QString. Bug #1602 (and earlier bugs) * src/qtterminal/QtGnuplotScene.cpp (mouseReleaseEvent): With the above fix in place, it is not necessary to lock out events during the doubleclick interval. 2015-05-30 Ethan A Merritt * src/qtterminal/QtGnuplotEvent.cpp src/qtterminal/QtGnuplotScene.cpp: Always respond to mouse button release event, even if the graph widget is busy or the mouse has left the window area. This prevents the event from being lost, causing the rotate-on-mouse-motion mode to get stuck. Bug #1602 2015-05-22 Ethan A Merritt * src/command.c src/command.h src/tables.c docs/gnuplot.doc: New command `printerr` works exactly as `print` except that output is always to stderr even if normal print output has been redirected using `set print`. 2015-05-14 Ethan A Merritt * term/tek.trm (SIXEL_fillbox): Handle FS_DEFAULT * term/tek.trm (SIXEL_make_palette): A second call to make_palette() failed to reset the state, leading to loss of all palette info. Now it overwrites any previous palette. Bugfix (e.g. heatmaps demo) 2015-05-13 Shigeharu Takeno * src/command.c (pause_command): The windows "pause" command is sensitive to the locale encoding. Keep a translation table to convert between gnuplot's idea of the encoding and WIN32 encoding states so that strings output by "pause" are not corrupted. Bug #1580, Feature Request #415 2015-05-08 Ethan A Merritt * PATCHLEVEL RELEASE_NOTES configure.in src/version.c: Update in preparation for June(?) release of patchlevel 5.0.1 2015-05-05 Ethan A Merritt * src/hidden3d.c (build_networks): In hidden3d mode do not draw the surface if the keyword 'nosurface' is present (set the linetype internally to LT_NODRAW). Normally this keyword would mean "draw only the data lines, not the isosampled grid lines", but that makes little sense for a hidden3d surface. This provides a way to draw only the contours of a hidden3d contour plot. See Bug #1603 2015-05-03 Hans-Bernhard Broeker * term/caca.trm: Insert missing include of . * src/wxterminal/wxt_gui.cpp: Insert missing include of . (wxt_waitforinput): Add note about missing check for HAVE_SELECT. 2015-05-02 Ethan A Merritt * Makefile.maint docs/pdffigures.tex docs/Makefile.am: Try to reduce churn during "make check" "make pdf" etc by suppressing dvi as an auto-generated target and defaulting to documentation with figures. 2015-04-30 Ethan A Merritt * src/hidden3d.c: If a hidden3d plot included a "with image" component, the hidden3d processing was tracking individual pixels as points. This slowed everything down without accomplishing anything useful. Now we ignore image plots altogether in the hidden3d code. 2015-04-27 Ethan A Merritt * src/graph3d.c (do_3dplot): Turning on "hidden3d" caused an off by one error in assigning color to contours levels. Bug #1603 * src/command.c (do_line): If an input line starts with a shell escape (e.g. '!' for linux) bypass first stage processing (df_tokenise) of the remainder of the line. NB: This means that text following a comment character is now passed to the shell rather than being stripped. Bug #1517 2015-04-24 Daniel J Sebald * src/misc.c (parse_fillstyle): Additional sanity checks when parsing fillstyle options. Bug #1597 2015-04-22 Ethan A Merritt * src/datafile.c (f_stringcolumn f_columnhead df_set_key_title): columnhead(FOO) could return strange results for FOO > 999 or undefined or otherwise invalid. Now we extend the range of valid column number to 9999 and return 0 for invalid or out of range FOO. Bug #1596 2015-04-20 Karl Ratzsch * src/term.c (test_term): Show terminal's native dashtype support in the `test` command output. 2015-04-16 Ethan A Merritt * src/color.c (set_color): Some terminals (pdfcairo, post) produced invalid output if given NaN as a gray value in term->set_color(). Others variously ignored it, replaced it with black, or gray=0. Now we trap NaN in the core code and substitute a request for background color. Note: I'd substitute with a fully transparent color, but not all terminals handle transparency. Bug #1595 2015-04-10 Daniel J Sebald * term/tkcanvas.trm: Fix problems handling an empty font family name in a requested font string, as in set term tkcanvas font ",15" Bug #1591 2015-04-08 Ethan A Merritt * src/fit.c (setvarcovar): Allocated size of string for FIT_COV_*_* variables was too small, corrupting the allocation heap. * src/fit.c (regress_finalize): Show results in log file even if the "quiet" flag suppresses screen output. 2015-04-07 Ethan A Merritt * src/term.c (termp_apply_lp_properties): Fix incorrect assumption that dashtype 1 is always solid and is already set by default. Bug #1588 * term/emf.trm (EMF_linetype): Two linetypes (LT_SOLID LT_AXIS) have an intrinsic dash pattern. Bug #1588 * src/term.c (test_term): Use same sequence of setting line properties linewidth/linetype/dashtype in the "test" command as in the core code. * src/set.c src/term.c: Adjust the new "set mono" option so that "set term xxx mono" is not persistent. I.e., it doesn't leave "set mono" in effect after the next terminal change. This makes it more like the version 4 mono terminal option. "set mono" itself is still persistent. 2015-04-04 Hans-Bernhard Broeker * src/term_api.h (DEFAULT_MONO_LINETYPES): Empty initializer is not allowed. 2015-04-03 Ethan A Merritt * src/axis.h (ACTUAL_STORE_WITH_LOG_AND_UPDATE_RANGE): If the value being stored to a log-scaled axis is negative, the stored value should be NaN rather than the un-logged original value. * src/plot2d.c (get_data): But even that doesn't help if UNDEF_ACTION re-stores the orginal value, so don't do that. Together these changes fix the problem that negative values mapped onto a log-scaled cbaxis produced a valid (but wrong) color rather than being treated as NaN. 2015-04-02 Karl Ratzsch * docs/gnuplot.doc: Document the C library routines used to parse numerical constants in commands and expressions. Integer constants are read using strtoll(); floating point constants are read using atof(). 2015-04-02 Hans-Bernhard Broeker * compile: Add script required by automake. * demo/plugin/Makefile.am (demo_plugin_so_SOURCES): Add gnuplot_plugin.h. (EXTRA_DIST): Add plugin.dem. * demo/Makefile.am.in (Makefile.am): Subdir 'plugin' has a Makefile.am, so it should not be in EXTRA_DIST. 2015-03-29 Ethan A Merritt * src/gadgets.c src/gadgets.h src/set.c src/setshow.h src/tables.c src/tables.h src/term_api.h src/term.c src/unset.c term/x11.trm src/show.c docs/gnuplot.doc: New commands {un}set monochrome {linetype N } set color (same as "unset mono") Maintain a set of monochrome linetypes (all black with varying dot- dash pattern and/or width) in parallel with the default set of color linetypes. Switch between the two sets using "set mono" or "set color". Terminal types that used to provide a separate "mono" keyword now trigger "set mono" as appropriate. For example, "set term pdf mono" is equivalent to "set term pdf; set mono". Six default monochrome linetypes are pre-defined. These do not exactly duplicate the idiosynchratic mono linetypes of various pre-version 5 terminals (be cairo cgm emf fig pdf post ...). Some further adjustment for individual terminals may be needed. 2015-03-28 Ethan A Merritt * term/fig.trm: unused variable 2015-03-24 Erik Olofsen * term/tek.trm: RGB + palette support for sixel terminal. The vt100/vt340 sixel emulator is limited to 16 distinct colors per plot but other emulators may permit more. 2015-03-24 * src/mouse.c src/plot2d.c src/wxterminal/gp_cairo.c: Incorrect argument type to abs() or fabs(). * src/stats.c (analyze_sgl_column): Incorrect truncation of double to int while calculating absolute deviation. Bug #1584 2015-03-24 Tatsuro MATSUOKA * src/command.c (pause_command): Work around a bug seen for mingw + SJIS encoding. 2015-03-23 Ethan A Merritt * term/fig.trm: Preload user-defined linetype colors and gnuplot's set of named colors so that they are available in fig plots. 2015-03-22 Ethan A Merritt * term/cairo.trm: The cairolatex terminal should not set the flag TERM_ENHANCED_TEXT since latex markup is not the same as gnuplot's enhanced text mode. This does not hurt plotting per se, but it causes the "test" command to emit a non-latex string. 2015-03-19 Ethan A Merritt * src/boundary.c (do_key_sample) src/graph3d.c src/graphics.c src/graphics.h (check_for_variable_color): The key sample for plots with filled objects (boxes, circles, ellipses, etc) and "lc variable" was drawn in some non-obvious color not necessarily present in the plot. Now we guarantee that the key sample is drawn using the color of the first point in the plot. 2015-03-13 Ethan A Merritt * src/unset.c: Fix memory leak (linked axis function) on reset 2015-03-08 Ethan A Merritt * src/datafile.c: The code tracking matrix column/row headers tried to extract the relevant string from the wrong internal array. Bug #1575 2015-03-06 Allin Cottrell * src/wxterminal/gp_cairo.c: Prevent free() of a string constant. 2015-03-05 Ethan A Merritt * src/term_api.h src/term.c src/graphics.c term/estimate.trm: New routine estimate_plaintext(char *enhancedtext) returns a string stripped of all enhanced text markup. Use this to provide plain text titles in output files even though the plot title itself contains markup characters. Bug #1573 2015-03-04 Christoph Bersch * src/multiplot.c demo/heatmaps.dem demo/layout.dem docs/gnuplot.doc: Fix inconsistencies in the margin and spacing options for "set multiplot layout". Allow using character or screen units. Make the character/screen keyword sticky; i.e. it applies to all four values in the command `set multiplot margins screen 0.1,0.9,0.9,0.1` Issue appropriate errors or warnings if margins and spacing aren't set together. Update and expand the documentation. 2015-03-04 Ethan A Merritt * src/util.c (gprintf): The "%h" format want a proper multiplication sign rather than 'x' when possible. We already do this for UTF8 and CP1252, now add support for iso_8859_* encodings. * docs/gnuplot.doc src/set.c src/show.c: In 5.0.0 the set margin command interpreted 4 values in the order set margin , , , but this order in non-intuitive and conflicts with the order in other commands (e.g. set multiplot layout). CHANGE this to set margin , , , Note that the code now sanity checks that (top > bottom), so this change will not be noticed for margins given in screen coordinates. 2015-03-02 Ethan A Merritt * src/tables.c src/graphics.c (plot_filledcurves) docs/gnuplot.doc: The "y1=foo" and "y2=foo" options to the filledcurves style are confusing, as both operate on the current plot's y axis regardless of whether it is y1 or y2. Rename the option as "y=foo" and remove mention of the older y1= and y2=. All three are accepted on input. Bug #1568 2015-02-26 Ethan A Merritt * src/fit.c src/fit.h src/set.c src/save.c src/show.c: "set fit nolog" * term/tek.trm: Remove SIXEL_set_color() terminal entry. This function does not perform the operation expected by the core code (change the current color for lines/texts/points/etc). Instead it redefines one of 16 linetypes. In gnuplot version 5 this causes most objects to be drawn in black. Removing the entry allows the sixel terminal to work more or less like a fixed color 16-pen plotter. Bug #1556 2015-02-24 Mojca Miklavec * configure.ac m4/apple.m4 term/aquaterm.trm: Correct "Aquaterm" to "AquaTerm" (framework name is case sensitive). 2015-02-23 Ethan A Merritt * axis.c: Special case code for axis tickmarks in polar plots was incorrectly being applied to all axes, not just the polar axis. Bug #1569 2015-02-18 Shigeharu Takeno * term/gd.trm (PNG_vector): Prevent accummulated round-off error in dotted line emulation by using (double) variables to track incremental coordinates. Bug #1549 2015-02-18 Ethan A Merritt * src/term.c (term_apply_lp_properties do_point load_linetype): Restore old (version 4) behavior of terminals such as hp pen plotter and pbm that do not support user-selected colors. Bug #1556 2015-02-13 Ethan A Merritt * src/gadgets.c (apply_pm3dcolor): Variable color specifier "palette cb" failed to handle log-scaling of the color axis. Bug #1560 2015-02-11 Erik Olofsen * configure.vms: update compile-time variables to include HAVE_VFPRINTF and MAX_PARALLEL_AXES 2015-02-09 Ethan A Merritt * src/qtterminal/QtGnuplotIterms.cpp (drawPoint): Don't draw an extra dot at the nominal origin of each point symbol. 2015-02-07 Ethan A Merritt * src/interpol.c: Rework "smooth kdensity" so that 1) it now handles logscale on y 2) it treats xrange as other plot styles do; in particular it no longer limits the x range to that of the points making up the kernel. 2015-02-06 Ethan A Merritt * src/interpol.c (cp_implode): The monotonic cubic spline code does not expect or handle multiple curves in a single data set. Thus cp_implode should not set the total number of averaged points to more than the total corresponding to the first curve. Bug #1548 2015-02-01 Ethan A Merritt * src/graphics.c (plot_betweencurves): This routine now handles both the 3-column variant of filledcurved ("between") and the y1= or y2= variants. In order that various lower level routines do not get confused, set the same options flag FILLEDCURVES_BETWEEN for all of these. 2015-01-31 Ethan A Merritt * src/save.c (save_textcolor): Remove redundant line left by mis-applied patch. 2015-01-27 Ethan A Merritt * src/plot2d.c src/show.c docs/gnuplot.doc: Report maximum number of parallel axes in "show version long". Enforce this limit when plotting. Document the limitation. * src/save.c: Use "set xyplane relative" rather than the deprecated "set ticslevel". 2015-01-24 Ethan A Merritt * src/command.c (test_palette_subcommand): Apply numeric locale to the $PALETTE datablock created by the "test palette" command. * term/pslatex.trm: Separation of linetype/dashtype in version 5 means that set_color should not be turned into term->linetype. Bug #1545 * src/term.c (term_test): Fix failure to save/restore arrow style. Use LT_SOLID for box around central text. Bug #1546 2015-01-20 Ethan A Merritt * src/graphics.c: Restore several lines of code that were inadvertantly lost in the revision to filledcurve processing (2015-01-16). 2015-01-19 Ethan A Merritt * src/boundary.c src/gadgets.h src/graph3d.c src/save.c src/set.c src/unset.c: Track text properties (font, enhanced, justification) for the key title separately from those for the key entries. Bug #1525 #1542 2015-01-16 Ethan A Merritt * src/tabulate.c: Tabular output of time/date values should check the new flag output flag (tictype) rather than the input flag (datatype), and fall back to a generic time format if the axis doesn't have one. * src/time.c (gstrptime): If the time format explicitly includes day, month, or year then always do sanity checking on the interpreted date. Return NULL if the sanity check fails. Previously the sanity check was only done if that field of the format was evaluated (i.e. it was not done if input garbage caused parsing to terminate early), and zeros were returned in the time structure with no indication of failure. This "failure silently returns zero" behaviour is still kept for hour, minute, and second input fields. * demo/timedat.dat: Add a line of headers to exercise the new sanity checks in gstrptime. * src/graphics.c src/plot2d.c: Fix breakage in plot style filledcurves {above|below} y1= 2015-01-15 Ethan A Merritt * term/cairo.trm (cairotrm_put_text): The bold/italic flags can become stuck after printing text. This patch fixes it by restoring the original terminal font after printing any enhanced text string. Test case: set key title "{/:Bold Hello}"; plot sin(x) title "World" Bug fix * src/graphics.c (plot_filledcurves): Reevaluate variable fill color for every polygon in the input stream to "with filledcurves". Bug/Feature Request #411 * src/gadgets.c (apply_pm3dcolor) src/term.c (load_linetype): Remove special-cased test for monochrome terminals that can lead cause a failure to update the linecolor in version 5 (e.g. background->black). Bug fix 2015-01-13 Ethan A Merritt * src/datafile.c (df_read_matrix) demo/matrix_index.dem: Handle named indices (extra line in data file containing name of subsequent data matrix) for nonuniform ascii matrix data. Bug #1538 * src/stats.c: The special code path to handle ascii matrix data was not correct. Fortunately the general case code works so long as the data is recognized as matrix data. This removes the broken code path. 2015-01-10 Ethan A Merritt * src/save.c (save_tics): The order in which tics options were saved could produce illegal syntax in the save file. Bug fix 2015-01-10 Ethan A Merritt * term/gd.trm: Ensure that the brush used for drawing dotted lines is reinitialized for each new line. Bug #1516 2015-01-10 Karl Ratzsch * docs/gnuplot.doc: Clarify sampling used by '+' special file. 2015-01-09 Ethan A Merritt * src/datafile.c (df_determine_matrix_info): Apply numeric locale when reading ascii matrix data. Bug #1536 2015-01-07 Achim Gratz * configure.in: Qt5 check via pkg-config should use --variable=host_bins rather than --variable=exec_prefix 2015-01-06 Ethan A Merritt * src/set.c src/boundary.c src/graph3d.c: Add a sanity check to ensure that the top margin is above the bottom margin. This corrects for possible user confusion or error in specifying on one line set margins , , , # (wrong order) * src/save.c (save_textcolor): TC_VARIABLE was not handled correctly. 2015-01-06 Ethan A Merritt * src/graphics.c src/graphics.h src/plot2d.c: Simplify the boxplot data handling. Collapse the separate filter_boxplot_factor() and filter_boxplot() into a single routine with a single supporting routine compare_ypoints(). Points are now sorted using the "factor" as a primary key, rather than using a separate pass to overwrite all y values to VERYLARGE if the factor does not match. Inspired by a patch from Jouke Witteveen Bug #1532 2015-01-04 Jouke Witteveen * src/plot2d.c (check_or_add_boxplot_factor) src/gadgets.h: When the requested "factor" column of boxplot data is missing or empty, the y value was being stored instead. Now we store DEFAULT_BOXPLOT_FACTOR (-1) instead, since this can never be mistaken for a label array index. EAM: Store this factor index in z rather than ylow. This prepares for a later patch to get rid of repeated swapping of y and ylow values rather than simply looking at the stored index directly. Bug #1532 2015-01-03 Jouke Witteveen * src/plot2d.c (check_or_add_boxplot_factor): Distinguish between boxplot category labels where one is a leading substring of the other. Bug #1532 2015-01-01 Release 5.0 2015-01-01 Bastian Maerkisch * src/term.c: Default to wxt terminal instead of the newly suported qt terminal on Windows. * win/gnuplot.iss: Display RELEASE_NOTES instead of NEWS file. 2014-12-31 Ethan A Merritt * FAQ.pdf: Fix broken URLs. 2014-12-30 Ethan A Merritt * src/qtterminal/qt_term.cpp (qt_atexit): Sanity check. * src/command.c src/command.h src/mouse.c src/mousecmn.h src/plot.c src/term.c: Backport core pieces of version 5.1 fix for Windows bugs #1432 and #1502. * src/win/wgnuplib.h src/win/wgraph.c src/win/winmain.c src/win/wpause.c: Backport win term pieces of version 5.1 fix for Windows bugs #1432 and #1502. * src/wxt/wxt_gui.cpp src/wxt/wxt_gui.h: Backport wxt term piece (referenced from wpause.c) of version 5.1 fix for Windows bugs #1432 and #1502 2014-12-28 Bastian Maerkisch * docs/titlepag.ms: Update to version 5. * docs/gnuplot.doc: groff tables for stats command. Several groff syntax fixes and minor layout tweaks. * config/mingw/Makefile: New targets grops and gropdf. * config/config.os2 config/makefile.os2: Update to version 5. * src/term_api.h src/os2/gclient.c: Eliminate compiler warnings. * src/wxterminal/wxt_gui.cpp: Use cairo_show_page() rather than cairo_surface_show_page() 2014-12-26 Ethan A Merritt * src/command.c (do_line): Report error if a "load" file fails to close an open bracketed clause. Bug #1522 * src/wxterminal/wxt_gui.*: remove old debug code. * FAQ.pdf: update for version 5 release 2014-12-26 Bastian Maerkisch * src/qtterminal/qt_term.cpp: Remove dead code. Avoid implicit casts to unsigned int. 2014-12-24 Bastian Maerkisch * src/win/wgraph.c (drawgraph) src/win/wgdiplus (drawgraph_gdiplus): Failure to re-initialize the font name and size for enhanced text. Bug #1529 2014-12-24 Shigeharu Takeno * src/win/wgdiplus.cpp (SetFont_gdiplus): Font names may be given in current encoding. Patch #712 2014-12-23 Hans-Bernhard Broeker * src/win/wgnuplot.mnu: Parameter input for atan2() was wrong. SF patch #1530 by Shigeharu Takeno. * src/win/wgnuplot-ja.mnu: Dito. 2014-12-21 Daniel J Sebald * src/wxterminal/wxt_gui.cpp: Track the most recent directory used by the export-to-file widget. 2014-12-19 Ethan A Merritt * src/wxterminal/wxt_gui.cpp (wxtPanel::wxt_cairo_create_bitmap): Another fix for the wxt terminal linked against wxWidgets 3.0. wxWidgets + wxgtk version 2.8 were fine with the sequence delete cairo_bitmap; cairo_bitmap = new wxBitmap(*image); but version 3.0 hits a use-after-free that can be attributed to a UI-triggered event invoking OnPaint(), which tries to access the old bitmap before the new one has been assigned. Omitting the delete "cures" this, but then there is a memory leak. Empirical tests seem to show that it suffices to defer the delete operation until after the assignment operation. A proper interlock might be better yet. 2014-12-18 Ethan A Merritt * src/datafile.c (df_parse_string_field): If an input data file uses Mac OS-9 format with \r as a line terminator, the entire file is mis-recognized as one very long line. If there are nevertheless recognizable field separators, the code to split out string fields into separate saved storage goes crazy, consuming huge amounts of memory. Detect and warn if an input string field exceeds MAX_LINE_LEN. Bug #1445 (also see Bug #1355) 2014-12-18 Hans-Bernhard Broeker * term/win.trm (WIN_set_font): Revert incorrect change from strncpy() to safe_strncpy(). 2014-12-17 Ethan A Merritt * src/datafile.c (df_generate_pseudodata): The sampling variable in a sampled plot is not necessarily x, so "set log x" should not affect it. E.g. set log x; set angle degrees; plot sample [a=1:360] '+' using (3+sin(a)):(cos(a)) with points Bug #1495 2014-12-16 Bastian Maerkisch * win/gnuplot.iss: Change working directory of shortcuts to current users's document folder. Works on Vista and upwards. Bug #1415 2014-12-15 Bastian Maerkisch * demo/kdensity.dem: End demo with pause / reset * config/mingw/Makefile: Convert eol style of text files to CRLF during install. Bug #1520 2014-12-15 Ethan A Merritt * src/mouse.c (do_event) src/gplt_x11.c src/wxterminal/wxt_gui.cpp src/qtterminal/QtGnuplotWidget.cpp: Distinguish auto-generated replot events (e.g. replot-on-resize) from user-generated replot events ('e' hotkey or toolbar replot widget). Use GE_replot for the former, GE_keypress('e') for the latter. Reject auto-generated replot requests while multiplot is active. (wxt was already doing this; now we extend it to qt and x11 also). Bug #1521 * src/wxterminal/wxt_gui.cpp: Do not change working directory in file export widget. 2014-12-14 Bastian Maerkisch * docs/windows/doc2html.c: Rename variable "basename" to "name" to avoid a name conflict on some platforms. 2014-12-13 Ethan A Merritt * src/wxterminal/wxt_gui.cpp (wxtPanel::wxt_cairo_refresh): The wxt terminal has been failing when linked against wxgtk3.0. The overt symptom is a library assert statement sometimes followed by a segfault: ./src/gtk/dcclient.cpp(2043): assert "m_window" failed in DoGetSize(): GetSize() doesn't work without window [in thread 7fb21f386700] Call stack: [00] wxOnAssert() [01] wxClientDCImpl::DoGetSize(int*, int*) const [02] wxBufferedDC::UnMask() Both the assert and the segfault are due to the plot window not yet having been rendered on the screen. The documented wxwidgets function panel->IsShownOnScreen() fails to reliably detect this condition, so we must use our own window id bookkeeping to skip any refresh commands before the window appears. Gnuplot Bug #1401 Debian Bug http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=750045 wxWidgets Bug http://trac.wxwidgets.org/ticket/16034 2014-12-11 Ethan A Merritt * src/wxterminal/gp_cairo.c (gp_cairo_move gp_cairo_initialize_plot): Do not let zero-length move iterrupt the current polyline context (dash pattern, end caps, polygon closure). Bug #1523 * src/plot2d.c (eval_plots): Save/restore original dummy variable name for 'x', so that a sampling range using a named variable does not clobber it. 2014-12-11 Bastian Maerkisch * src/win/wgraph.c (drawgaph) src/win/wgdiplus.c (drawgraph_gdiplus): Ignore intermediate move commands in a polyline sequence. Fixes custom dashpatterns for splots and improves drawing performance. Note that custom dashpatterns are only available for the GDI+ variant. Bug #1523 2014-12-11 Shigeharu Takeno * docs/gnuplot.doc docs/term-jp.diff: sync to docs version 1.902.2.20 2014-12-08 Bastian Maerkisch * src/term.c (do_point): Always use solid lines to draw point symbols. * src/win/wgraph.c term/win.trm: Make sure that the window size variables are initialized if wgnuplot.ini does not exist yet. Fixes a regression introduced on 2014-10-16. 2014-12-05 Ethan A Merritt * term/PostScript/prologue.ps: Re-order dash types to more closely match the cairo and qt terminals. * src/wxterminal/wxt_gui.*: The toolbar widgets for replot/zoom/grid require intervention by the core code in order to act. This is not possible when in -persist mode after the parent process has exited, so disable the toolbar widgets. * src/gp_types.h: New state flag INVALID_NAME for internal variables. src/eval.c (pop_or_convert_from_string eval_link_function): Consolidate initial tests for invalid internal variable type. Test for the correct use of linked axis mapping function variables (f(x) for x axis, f(y) for y axis, etc). Bug #1519 2014-12-01 Ethan A Merritt * src/axis.c (clone_linked_axes): Sanity check for linked axis via and inverse functions used fabs() with wrong grouping of parentheses. Bug #1519 2014-11-25 Ethan A Merritt * src/qtterminal/qt_term.cpp: Increase the number of pre-defined dash patterns for the qt terminal to 5, matching the order used by the cairo terminals. 2014-11-23 Ethan A Merritt * src/axis.c src/set.c: The full names of the parallel axes are too long to fit in character arrays built to hold the simpler name "x2/cb/etc". But the 'set' commands using these arrays do not apply to parallel axes, so we avoid problems by never loading these arrays for parallel axes. 2014-11-21 Ethan A Merritt * term/gd.trm: Replace the dotted-line code in PNG_vector with an adaptation of the dash pattern code used by canvas.trm. * src/term.c (term_apply_lp_properties): Special linetype LT_AXIS is intended to produce a dotted line if possible, even on terminals that do not support the general dash pattern mechanism introduced in v5. This means that when rendering lines with linetype LT_AXIS the dashtype code should not be called at all. This bug affected at least the gd and qt terminals. Bug #1516 * src/axis.c (axis_name) src/save.c: paxis tics and range settings were not being saved. * src/show.c: formatting typos (missing \t at beginning of line) * src/graphics.c (map_position_r): If only the x coordinate delta is requested, don't bother to calculate delta y, particularly because delta y=0 will fail if y is log scale. Bug #1512 2014-11-12 Ethan A Merritt * bump patchlevel identifier to -rc3 2014-11-11 Ethan A Merritt * src/term_api.h term/README: Add a 2nd parameter to the interface for term->modify_plots(operations, plotno). All terminals for which this entry point is not NULL must be updated accordingly. This patch does not by itself add any new functionality or user-visible change. Better to make this change now rather than after release of 5.0 since it breaks compatibility between core code and outboard drivers. * src/mouse.c src/gplt_x11.c term/caca.trm term/win.trm term/x11.trm src/qtterminal/QtGnuplotScene.cpp src/qtterminal/qt_term.* src/wxterminal/wxt_gui.cpp src/wxterminal/wxt_term.h: Update term->modify_plots() entry in the terminals that provide it. 2014-11-07 Akira Kakuto * term/luz/gnuplot-tikz.lua: Use \errmessage rather than \PackageError because not all TeX variants provide the latter. 2014-11-07 Ethan A Merritt Timefmt revision part 1 of 7 * src/axis.c src/axis.h src/datafile.c src/fit.c src/mouse.c src/parse.c src/save.c src/set.c src/setshow.h src/show.c src/unset.c docs/gnuplot.doc demo/gantt.dem: - Remove axis->timefmt and replace it with a single global timefmt. This is what the documentation has always said, but it breaks the undocumented command: set timefmt y "fmt-different-from-xaxis-fmt" - Add a new flag axis->tictype to control interpretation of tic format. axis->datatype will continue to control input format interpretation. Timefmt revision part 2 of 7 * src/save.c src/save.h src/setshow.h src/show.c: - Replace macro SAVE_NUM_OR_TIME with routine save_num_or_time_input(). This routine uses _input_ data format, mostly for reporting axis range. Timefmt revision part 3 of 7 * src/save.c src/save.h src/show.c: - Show and save xyz positions using time-format coordinates when needed. Note that like axis ranges, these are meant to be read in again later. Thus they are written using the input format not the output format. Timefmt revision part 4 of 7 * src/axis.c (get_tics copy_or_invent_formatstring) src/set.c src/unset.c src/show.c src/save.c docs/gnuplot.doc demo/world.dem: - New command set {xyz}tics {time|geographic|numeric} sets axis->tictype - Output formats chosen based on axis->tictype rather than axis->datatype - Report axis->tictype setting with axis->format in "show" and "save" Timefmt revision part 5 of 7 * src/datafile.c src/parse.c: - Track how many parameters were passed to timecolumn(), so that version 4 behavior can be emulated when only 1 parameter is passed. Timefmt revision part 6 of 7 * src/axis.h src/set.c: - Add the tictype keywords to set format {axis} {time|geographic|numeric} - Reset to numeric on "unset format" Timefmt revision part 7 of 7 * src/time.c (gstrftime xstrftime) docs/gnuplotdoc demo/timedat.dem: Introduce a new time format modifier 't', used to distinguish dates from times. This allows formatting time data as hours/minutes/seconds relative to time=0 rather than as a calendar date. Compare these representations of the stored value -3672.50 seconds: default date format # "12/31/69 \n 22:58" format "%tH:%tM:%tS" # "-01:01:12" format "%.2tH hours" # "-1.02 hours" format "%tM:%.2tS" # "-61:12.50" 2014-11-07 Daniel J Sebald * src/wxterminal/wxt_gui.{cpp|h}: Add a toolbar widget on the wxt terminal to export current plot to a PNG, SVG, or PDF file. 2014-11-04 Ethan A Merritt * src/datafile.c (f_dollar f_column): When a data field containing NaN is encountered, df_readline returns DF_UNDEFINED to the caller. This is sufficient to handle plotting that point per se, but if the value is also used in evaluation of an arithmetic expression with a side effect then this undefined status flag is not available. For consistency we now pass NaN to the expression evaluation code as well. E.g. plot FOO using 1:(side_effect=f($2)) could leave some random (probably left-over) value in side_effect. Now if $2 is NaN and for example f(x) = (x+foo) then side_effect becomes NaN also. Before this side_effect would have received some other, incorrect, numerical value. * src/save.c (save_dashtype): dashtype -1 is an internal flag; do not save it to an external file. 2014-11-01 Ethan A Merritt * term/cairo.trm (cairotrm_put_text) src/wxterminal/wxt_gui.cpp (wxt_put_text): Start each top level enhanced text recursion using the full font name given in "set term font 'foo'", rather than the most recent font stored in the plot (which is only the font family name, not bold/italic/other). This maintains bold or italic in the original font name, but I am not entirely convinced that it cannot overwrite an intentional change in font family. Bug #1505 2014-10-31 Ethan A Merritt * src/plot2d.c: Issue a warning if someone tries to specify a sampling range for a data plot. Bug #1510 2014-10-31 Bastian Maerkisch * src/wxterminal/wxt_gui.cpp (wxtFrame::OnSize): Only replot on resize if the wxt settings were properly initialized by wxt_init(). On Windows, this would otherwise cause many graph windows to be opened when the first plot command is issued and gnuplot finally hangs or crashes. Bugfix. 2014-10-29 Christoph Bersch * term/lua/gnuplot-tikz.lua term/luz.trm: Boxed text support. 2014-10-26 Ethan A Merritt * term/wxt.trm src/wxterminal/wxt_term.h src/wxterminal/wxt_gui.*: Add a checkbox to the tool widget controlling whether or not the plot is redrawn via "replot" as the terminal window is resized. 2014-10-19 Christoph Bersch * term/lua/gnuplot-tikz.lua: Missing initializations. Bug #1503 2014-10-16 Christoph Bersch * src/stats.c: The stats code was confusing the x and y dimensions of matrix data. E.g. it would report a 5X7 matrix as being 7X5, and mis-calculate the indices of the min/max values. Bug #1501 * term/lua/gnuplot-tikz.lua: Fix incorrect font test. Bug (Feature Request) #409 2014-10-16 Bastian Maerkisch * src/win/wgraph.c src/win/wgidplus.c: Accept zero point size. Eliminates drawing of unwanted point symbols for labelled contours. Bugfix * src/win/wgnuplib.h src/win/wgraph.c term/win.trm: The `size` option now refers to the canvas size instead of the window size in order to be consistent with the qt and wxt terminals. The window size can still be set with the new `wsize` option. Settings are now included in output of `show term`. Bug #1400 * src/win/wgraph.c term/win.trm: The windows terminal allowed users to change linetypes via an ini file or with the help of a dialog. This has been superseeded by the more general `set linetype` mechanism. The old code is still available but only active with WIN_CUSTOM_PENS defined during compilation. 2014-10-11 Christoph Bersch * term/lua/gnuplot-tikz.lua: LT_AXIS and LT_SOLID imply specific dash types. Bug #1491 2014-10-11 Hans-Bernhard Broeker * src/axis.c (copy_or_invent_formatstring): Lower end of axis may need more precision in invented format than the distance between max and min. Bug #1496 2014-10-08 Ethan A Merritt * src/save.c (save_all): Write out the filename last used for plotting. This makes a saved plot command referencing '' slightly more useful. 2014-10-07 Ethan A Merritt * src/misc.c (lf_push lf_pop): If lf_push/lf_pop are invoked from do_string_and_free to handle bracketed if{} or do{} expressions, they should not touch the call arguments ARG1, ARG2, ... Save/restore of the call arguments is only needed if lf_push/lf_pop are invoked by "call". Bug #1494 2014-10-03 Christoph Bersch * term/lua/gnuplot-tikz.lua: linetype -1 must reset dashtype to solid. Bug #1491 2014-10-01 Ethan A Merritt * src/misc.c (arrow_parse): Remove order dependence of "fixed" keyword. * src/hidden3d.c (draw_edge): When an arrow is split into segments by hidden surface processing, only keep the arrowhead on the original tip. * src/plot2d.c (get_data): Timedata for HISTOGRAMS requires a special case. * term/aed.trm term/v384.trm config/makefile.dj2 config/makefile.emx config/makefile.vms configure.vms docs/doc2texi.el docs/Makefile.am src/makefile.all src/makefile.awc src/term.h: Remove obsolete terminals: aed: pre-1980 display device ($15,000) with 500x500 pixels, 256 colors v384: Vectrix VX 384 mid 1980s graphics display terminal ($5000) with 672x480 pixels, 512 colors * docs/gnuplot.doc: Replace outdated section on `set xdata time`. 2014-09-26 Ethan A Merritt * term/js/gnuplot_mouse.js: Typo in logical test for hypertext. * src/axis.h src/save.c src/set.c src/show.c src/unset.c src/graphics.c src/graph3d.c: set [*]tics {{no}enhanced} 2014-09-24 Ethan A Merritt * src/interpol.c: Force the number of intervals used for interpolating monotonic cubic splines ("smooth mcsplines") to be at least twice the number of data points. 2014-09-22 Christoph Bersch * src/misc.c (parse_fillstyle): Remove order dependence of keyword "transparent". * term/lua.trm term/lua/gnuplot-tikz.lua: Support RGBA linecolors and LT_NODRAW. Add a linewidth terminal option. 2014-09-20 Bastian Maerkisch * src/fit.c src/fit.h src/save.c src/set.c src/show.c src/unset.c docs/gnuplot.doc demo/fit.dem: Remove xerrors option (which requires 3 columns) since it is not like the xerrorbars plot style (which requires 4). Rename `noerrors` option to `unitweights`. Let the fit command default to `unitweights`, i.e. do not interpret the last column of the using spec as z-errors. Add a command `set fit v4|v5` to switch between old-style command line syntax and the new one. Default to `v5`, but `reset` does not change the current setting. Note that this change is backward-incompatible with v5-rc1 and v5-rc2. However it restores compatibility with v4, subject to the restriction that v4 syntax is only recognized if all independent variables appear in the "fit" command itself (see below). * src/fit.c: Ethan A Merritt - use the tally of dummy variable names to detect version 4 syntax in which the last column of a using spec contains zerror but no "*error" keyword is provided. 2014-09-18 Ethan A Merritt * src/datafile.c: Revised error message for datafile open failure. * src/fit.c src/parse.c src/parse.h (int fit_dummy_var[]): Track the occurrence of dummy variable names in a fit command. This lets us count the independent variables so long as they are not obscured. fit f(x,y) 'data' using 1:2:3:4 # flags use of 'x' and 'y' fit x*y 'data' using 1:2:3:4 # flags use of 'x' and 'y' g(x) = x*y; fit g(x) 'data' using 1:2:3:4 # flags 'x', doesn't notice 'y' In each case fit_dummy_var[0] is 1. In the 3rd case fit_dummy_var[1] is 0 but should be 1. Fixing this would be quite hard. 2014-09-14 Bastian Maerkisch * src/mouse.c (xDateTimeFormat): Use gnuplot's own ggmtime() instead of gmtime() to avoid platform dependant restrictions. Fixes display of dates before 1970 and after 2038 in the status bar on Windows. Bug #1470 2014-09-09 Pieter-Tjerk de Boer * docs/gnuplot.doc: Update help on fit to new command syntax. 2014-09-09 Akira Kakuto * src/win/wpause.c (PauseBox): Do not wait for further events after pause dialog box was closed. Bugfix. 2014-09-08 Christoph Bersch * demo/stringvar.dem docs/gnuplot.doc src/internal.c (f_word f_words): Modify the word() and words() functions to recognize quoted strings inside the top level string as single entities. 2014-09-08 Christoph Junghans * configure.in: New option --without-libcerf 2014-09-08 Ethan A Merritt * src/misc.c (lp_parse parse_colorspec): Allow a quoted colorname to immediately follow the keywords lc|linecolor|fc|fillcolor; i.e. in this case the additional rgbcolor keyword is optional. 2014-09-08 Shigeharu Takeno * docs/gnuplot.doc docs/term-ja.diff docs/gnuplot-ja.doc man/gnuplot-ja.1: Sync Japanese documentation to 1.902.2.5 2014-09-07 Ethan A Merritt * src/plot2d.c: "set linetype 1 pt 'A'; plot x with lp" requires that the plot->labels field be initialized before plotting. * src/save.c: handle PT_CHARACTER when saving linetype 2014-09-05 Ethan A Merritt * src/term_src/api.h src/gadgets.c src/hidden3d.c src/misc.c src/plot2d.c src/plot3d.c src/save.c src/set.c src/ show.c src/term.c: The field lp_style_type.pointflag was variously used as a Boolean, an integer, or a magic number indicating an uninitialized state. Clean this up by replacing it with a bitfield lp_style_type.flags with defined bits LP_SHOW_POINTS LP_NOT_INITIALIZED LP_EXPLICIT_COLOR. This has the side effect of allowing a trivial fix for a regression in 4.6.5 that caused "set hidden3d; splot ... lc " to ignore the requested color. See Bugs #1284 #1475 2014-09-05 Karl Ratzsch * docs/plotstyles.gnu: Dummy up a version of the missing/NaN figure for use with Windows documentation. 2014-09-04 Ethan A Merritt * src/graphics.c (place_arrows) src/graph3d.c (place_arrows3d): Revert arrowhead patch of 2014-08-18. Document that if you want a dashed arrow shaft it is best to use "nofilled" for the arrow head. Bugs #1460 #1476 2014-09-03 Ethan A Merritt * src/graph3d.c src/hidden3d.c: "splot ... with dots" was not drawing the dots. Bug #1474 2014-08-31 Ethan A Merritt * src/stats.c docs/gnuplot.doc: Calculate and report sample standard deviation (STATS_ssd) as well as the population standard deviation (STATS_stddev). Provide formulae for the reported quantities in the LaTeX documentation, and document the difference between _ssd and _stddev in all documentation formats. * src/stats.c: In version 5 when there is no using spec df_readline() always returns at most the number of columns present on the first line. Bug #1472 2014-08-30 Petr Mikulik * config/config.os2: Use _strtoll. 2014-08-29 Petr Mikulik * src/gplt_x11.c (exec_cmd process_configure_notify_event): Add missing #ifdefs: USE_X11_MULTIBYTE and PIPE_IPC. 2014-08-28 Ethan A Merritt * Prepare release notes for 5.0.rc2 * src/fit.c: Initialize number of error terms for "zerror" option (fixes a possible segfault) but otherwise defer work on the new error options for later as warned in the release notes. 2014-08-22 "Jun T." . * src/bf_test.c: Use HAVE_STDLIB_H and HAVE_MALLOC_H to determine proper system header file for calloc(). 2014-08-21 Ethan A Merritt * src/fit.c: Handle columnheaders in input to "fit". Bug #1467 2014-08-20 Ethan A Merritt * Branchpoint for 5.0 (cvs tag -b branch-5-0-stable) 2014-08-20 Ethan A Merritt * src/wxterminal/gp_cairo.c: Distinct empirical scale factors for dashlength used by pngcairo, pdfcairo, and wxt. * term/emf.trm: Scale dashlength with current linewidth. 2014-08-18 Ethan A Merritt * src/graphics.c (place_arrows) src/graph3d.c (place_arrows3d): Only invoke the arrowheads only code if there really is an arrowhead. 2014-08-18 Hans-Bernhard Broeker * config/mingw/Makefile (VPATH): Drop $W from VPATH. Necessary to avoid circular dependency on wgnuplot.mnu (%.$(O)): Use pattern rule instead of VPATH to build Windows source files. (VERSIONING): Avoid inverted logic in makefile conditional. (console, windows, pipes): Simplify by letting the default rule in the sub-make handle things. (default, all): Versioning is really needed by $(TARGET) rule, so let that handle constructing it. ($(TARGET)): Do VERSIONING first, drop dependencies on icon files. (%.o): Use pattern rules to build Qt source files. Much simpler than spelling it out long hand for every single source file. 2014-08-15 Ethan A Merritt * src/bf_test.c src/Makefile.am src/binary.* (removed) config/makefile.os2 config/makefile.dj2 config/makefile.cyg config/cygwin/Makefile config/mingw/Makefile config/msvc/Makefile: Remove bf_test dependence on all other gnuplot files and libraries. This makes binary.c and binary.h superfluous. Bugs #1412 #1451 * src/makefile.all src/makefile.awc: Remove mention of binary.o * config/*/Makefile: Remove alloc and binary from bf_test dependencies * src/graphics.c (place_objects) src/set.c (set_obj): Apply default rectangle style at the time of a "set object rect" command rather than waiting until the rectangle is drawn. This prevents the default style line/dash settings from overriding explicit rectangle commands. Bug #1460 * src/save.c (save_linetype): Bugfix - dashtype was being saved only if there was also a point type. * src/gadgets.c (apply_pm3dcolor): Don't clobber current dashtype by calling term->linetype(LT_BLACK). Call term->set_color(BLACK_COLORSPEC) instead. * src/graphics.c (place_arrows) src/graph3d.c (place_arrows3d): Force solid lines for arrow heads. 2014-08-15 Shigeharu Takeno * src/gplt_x11.c: For single byte fonts gnuplot_x11 uses a list of previously used fonts to speed up the search for a new target font. Now we add an equivalent for multi-byte font search. 2014-08-14 Ethan A Merritt * src/graphics.c (do_rectangle) src/graph3d.c (map3d_position_r) demo/rectangle.dem: Fix y extent and clipping of rectangles with negative y coord or inverted axes. Bug #1462 2014-08-05 Ethan A Merritt * src/mouse.c (event_buttonpress): Remove extraneous event_reset. 2014-08-02 Ethan A Merritt * src/misc.c (parse_colorspec): Apply user-defined line colors to text color also. Bug #1452 src/misc.c src/save.c src/set.c src/term.c src/term_api.h: Store custom dashtype string as a constant length character array rather than a dynamically allocated string. This fixes memory leakage that happened whenever a linetype using dashes was discarded. 2014-08-01 Ethan A Merritt * src/mouse.c (event_buttonpress): Trap mouse button click on press rather than on release so that "pause mouse {button1|any}" takes precedence over a key binding to the mouse button. Bugfix 2014-07-30 Ethan A Merritt * term/x11.trm: Remove misleading mention of -noevents. This is a command line option for gnuplot_x11, not for gnuplot itself. * src/datafile.c docs/gnuplot.doc demo/heatmaps.dem: New text input matrix keywords `columnheaders` and `rowheaders`. These handle reading matrix data from a csv file in which the first row and/or column contains labels rather than data. * src/eval.c (update_plot_bounds): Provide a user-visible copy of the current terminal scale (oversampling, etc) as GPVAL_TERM_SCALE. Bug #1291 2014-07-28 Allin Cottrell * src/syscfg.h: Report 32/64 bit Windows build in version string 2014-07-28 Ethan A Merritt * src/wxterminal/gp_cairo.c: Do not pass a linewidth of zero to the cairo library. The linewidth of LT_AXIS is now set in the core code, do not further reduce it in gp_cairo_stroke(). 2014-07-25 Ethan A Merritt * src/gplt_x11.c: Scale x11 dashlength with linewidth. 2014-07-23 Shigeharu Takeno * src/mouse.c src/mouse.h src/set.c src/show.c docs/gnuplot.doc: New command 'set mouse zoomfactors ,' 2014-07-22 Ethan A Merritt * src/gp_types.h src/plot2d.c (store2d_point): INRANGE/OUTRANGE refer to points that are inside/outside the plot boundaries as defined by xrange, yrange, etc. They fail to handle points that are outside theta range limits given for polar data. That is, a point may be outside of trange [pi/2:pi] even though it would lie well inside the plot boundaries if drawn. Add a new category EXCLUDEDRANGE for such points. * src/graphics.c (plot_impulses): Test for EXCLUDEDRANGE data points so that set trange [theta_min:theta_max] actually does something. Bug #1439 * demo/poldat.dem: Make sure trange includes the whole plot. 2014-07-18 Ethan A Merritt * demo/Makefile.am.in: Do not create a symlink to GNUPLOT_X11 in the build directory during "make check". This was probably intended to handle the rare case of ./configure --program-suffix=foo but it breaks the more common case of configuring on a system without x11 support and then running "make check" twice. Bugfix 2014-07-14 Ethan A Merritt * src/gadgets.c src/save.c src/set.c src/gadgets.h: Continue to recognize "set style increment user" even though it has been deprecated in favor of "set linetype". Bug #1411 (not really a bug) 2014-07-12 Ethan A Merritt * src/parse.c (check_for_iteration): Fix failure to detect some loop [start:end:increment] combinations that should be executed only once or not executed at all. Bug #1441 2014-07-10 Ethan A Merritt * src/set.c (set_dummy): More sanity checks on "set dummy" syntax. Bug #1442 2014-07-06 Ethan A Merritt * src/set.c (load_tic_user): "set Xtics ()" should clear the list of user-specified tics rather than setting tic generation to auto. 2014-07-04 Shigeharu Takeno * docs/gnuplot.doc docs/term-ja.diff docs/gnuplot-ja.doc man/gnuplot.1 man/gnuplot-ja.1: Fix typos. Sync Japanese documentation to 1.896 2014-07-04 Bastian Maerkisch * src/win/wgraph.c: 'q' closes graph window. * src/qtterminal/qt_term.cpp (qt_options) term/wxt.trm (wxt_options): On Windows, the wxt and qt terminals can be used in the same session. 2014-07-01 Ethan A Merritt * term/cairo.trm, term/wxt.trm: Always report {no}enhanced property in "show term". * src/color.c: If the current terminal has property "monochrome" then convert all requests for constant color as "black". Bug #1423 2014-06-24 Ethan A Merritt * src/set.c src/show.c src/tables.c docs/gnuplot.doc: New command: set margins , , , acts just like four successive commands set lmargin , ... * src/unset.c: unset margins 2014-06-20 Ethan A Merritt * configure.in src/wxterminal/wxt_gui.h: The configuration test for wxWidgets >= 2.8 had no effect on code generation. Remove this test. * configure.in src/wxterminal/wxt_gui.h: Revert the attemp to guess whether -lX11 is required by wxt. As feared, this causes problems on OSX and other platforms where wx is built on top of something other than X11. 2014-06-16 Karl Ratzsch * fit.c: FIT_NITER holds number of iterations used by previous fit. 2014-06-16 Ethan A Merritt * configure.in src/wxterminal/wxt_gui.h: wxWidgets versions > 2.8 want the main program to call XInitThreads(), but fail to specify -lX11 in wxt-config. So we force this ourselves. [=> reverted 2014-06-20] Bug #1401 * src/graphics.c (xtick2d_callback): Clip r axis tics and tic labels to the bounding box of the plot. Bug #1290 2014-06-15 Dmitri A. Sergatskov * configure.in: Add LRELEASE for Qt5 autoconfiguration 2014-06-15 Bastian Maerkisch * src/plot.c (main): Fix persist mode on Windows when reading from a pipe. See Bug #1322 2014-06-15 Akira Kakuto * src/binary.c src/datafile.h src/syscfg.h: LFS support on Windows for MSVC and MinGW. See also Patch #675 2014-06-14 Ethan A Merritt * src/axis.h src/axis.c src/boundary.c src/plot2d.c (eval_plots): Unlike all other axes, log scaling was being applied to the color axis (cb) in do_plot() rather than in the caller eval_plots(). This caused "refresh" (as opposed to "replot") to fail. Move the log-scale correction up to eval_plots() like the other axes. Bug #1425 * src/misc.c (prepare_call): Allow parenthesized expressions as call parameters. The value is passed as a string. * src/command.c (exit_command): New option "exit error 'message'" prints the message and return to the top command line, breaking out of any loops or calls cleanly. In non-interactive mode the program then exits. 2014-06-13 Bastian Maerkisch * src/qtterminal/qt_term.cpp (qt_waitforinput): Fix index error when trying to stop thread which reads from pipe. Bug #1426 2014-06-13 Ethan A Merritt * src/datafile.c (df_generate_pseudodata): Do not try to access plot structure if we were called from fit rather than plot. Bug #1427 2014-06-12 Christoph Bersch * term/lua.trm term/lua/gnuplot-tikz.lua: Scale dashlength with linewidth. 2014-06-11 Ethan A Merritt * src/mouse.c (event_reset) src/qtterminal/QtGnuplotWindow.{h|cpp}: Window close events from qt were not being passed through to the main program, so "pause mouse close" did not work. Also a backgrounded instance could hang rather than exit when the last plot window closed. Bug #1418 * src/fit.c: Remove spurious test and error message for time data with only 2 columns in the using spec. Bug #1424 * man/gnuplot.1: update 2014-06-11 Mojca Miklavec * term/aquaterm.trm: Correctly support encoding CP1252. 2014-06-11 Tatsuro MATSUOKA * win/gnuplot.iss: Include Qt platform DLLs in distribution package. 2014-06-10 Ethan A Merritt * docs/gnuplot.doc: Add a section explaining the "persist" option. Bug #1418, #1419 * term/post.trm term/svg.trm src/qtterminal/qt_term.cpp: Add an empirical scale factor to the dashlength*linewidth computation to make the resulting patterns closer in total size to the built-in ones. 2014-06-10 Christoph Bersch * term/post.trm term/svg.trm: Scale dashlength with linewidth. 2014-06-09 Daniel J Sebald * src/qtterminal/QtGnuplotWidget.cpp (processEvent): Always "resize" the initial plot to its own size. This may work around strangeness on some systems that create the initial qt plot window with the wrong size. Bug #1417 (forwarded from Debian) Patch #661 2014-06-09 Bastian Maerkisch * src/win/wgdiplus.cpp src/win/wgraph.c src/win/wgnuplib.h term/win.trm: Version 5 dashtypes. Custom dashtypes supported by GDI+ driver. * src/wxterminal/wxt_gui.cpp: Also "restore" the window state on "raise". Bug #1389 * src/win/winmain.c (WinMain): Change type from PASCAL to CALLBACK. * src/fit.c: Test if covariance matrix is available before saving it to user variables. 2014-06-08 Shigeharu Takeno * docs/gnuplot.doc win/README-Windows.txt win/README-ja.txt docs/gnuplot-ja.doc: sync to docs version 1.891 2014-06-07 Mojca Miklavec * src/wxterminal/gp_cairo.c: Scale dashlength with linewidth, similar to what qt does. 2014-06-04 Bastian Maerkisch * src/plot.c src/win/winmain.c|h term/caca.trm: Only if a wxt, caca or windows terminal window is open, the -persist option is handled by keeping the main input loop running. This is unfortunate but maybe the best we can do since we are missing a process fork or detach mechanism. This avoids a zombie process when no plot windows are open in a session. For the qt terminal -persist works as on other platforms since it uses a secondary process. Bugs #1308, #1335, #1343 2014-06-03 Ethan A Merritt * src/graph3d.c src/show.c src/save.c docs/gnuplot.doc: The hidden3d code processes the lines making up the plot border using the same algorithm as it does for the plot elements. This renders partially occluded borders correctly for actual surfaces but fails to recognize occlusion for, e.g., 3D histograms drawn with impulses. New keyword option "set border behind" draws the border lines before the plot elements even for hidden3d plots. * src/term_api.h src/wxterminal/gp_cairo.c src/wxterminal/wxt_gui.cpp: Change the implementation of greying out inactive keybox entries in wxt to use a textbox rather than the active area of the key entry. Bug #1416 * src/hidden3d.c (draw_vertex): Handle p_type == PT_CHARACTER. 2014-06-02 Bastian Maerkisch * src/win/wgraph.c src/win/wgdiplus.cpp: Grey out key entries when corresponding plot is toggled off. * src/win/wgraph.c (GraphUpdateWindowPosSize) src/win/wgnuplib.h term/win.trm (WIN_options): Immediately apply changes to window position and size. Bug #1400 * src/datafile.h: Revert the Windows LFS changes for now as they seem to cause problems on some systems. 2014-06-01 Ethan A Merritt * src/axis.c src/gadgets.c src/misc.c src/set.c src/unset.c: Replace magic numbers with LAYER_{BEHIND|BACK|FRONT}. * src/graph3d.c: Remove obsolete (always true) conditional USE_GRID_LAYERS. Minor clean up for the grid layer logic. 2014-06-01 Tatsuro MATSUOKA * win/gnuplot.iss: Include gnuplot_qt.exe in installer. Patch #689 * src/qtterminal/gnuplot_qt.cpp: Search for Qt translation files in gnuplot's installation directory on Windows. Patch #687 2014-06-01 Ethan A Merritt * src/datafile.h: Partial support for LFS on Windows. Currently mostly useful for 64 bit builds since integers on the the gnuplot command line are limited to 31bits otherwise. Patch #675 2014-06-01 Bastian Maerkisch * config/mingw/Makefile: Target 'clean' and 'veryclean' include Qt files, see patch #688. * config/mingw/Makefile win/gnuplot.iss: Include RELEASE_NOTES. Add "qt" as option as default terminal. 2014-05-30 Ethan A Merritt * term/post.trm term/cairo.trm: The "header" keyword for epslatex and related terminals can introduce a string of arbitrary length. Therefore it is not safe to try to store it in the fixed length term_options character array. Bug #1413 * term/gd.trm: Limit the stored length of the font so that term_options cannot overflow. Bug #1413 * Makefile.am RELEASE_NOTES: Include Release Notes in the distribution package. * FAQ.PDF: Update for version 5. * src/gplt_x11.c: Grey out key entries when corresponding plot is toggled off. 2014-05-29 Akira Kakuto * term/caca.trm: Modify nominal codepage to accommodate CJK Windows. 2014-05-29 Tatsuro MATSUOKA * config/mingw/Makefile: Support compilation of the qt terminal. Patch #684 2014-05-29 Karl Ratzsch * docs/gnuplot.doc: Improve documentation of `update` command. Patch #686 * src/win/wgdiplus.c src/win/wgraph.c: Change order of pointtypes to match the sequence in other terminals (cairo, postscript, gd, svg). Patch #681 2014-05-28 Ethan A Merritt * src/graph3d.c (plot3d_points): Handle pointtype PT_CHARACTER. * src/plot3d.c: Rearrange the order of testing for plot style options so that it is not possible to end up with uninitialized font or text properties. 2014-05-27 Ethan A Merritt * src/datafile.c (df_readascii): Report status DF_UNDEFINED if a data value evaluates to the constant "NaN", just as if we calculated it on the fly to be e.g. 1/0. * src/stats.c: Remove out-of-date comment that incorrectly describes what happens in this case. Bug #1408 2014-05-26 Ethan A Merritt * term/js/gnuplot_svg.js term/svg.trm: Grey out key entries when corresponding plot is toggled off. * src/qtterminal/QtGnuplotItems.* src/qtterminal/QtGnuplotScene.cpp: Grey out key entries when corresponding plot is toggled off. * src/wxterminal/wxt_gui.cpp (wxt_grey_out_key_box): Grey out key entries when corresponding plot is toggled off. 2014-05-24 Bastian Maerkisch * src/wxterminal/wxt_gui.cpp (wxt_waitforinput): Do not wait for an event when only checking for mouse events. Bugfix 2014-05-23 Ethan A Merritt * src/boundary.c: A width adjustment for the length of the key title was being applied to every column of entries in the key instead of just once for the whole key. Apply the "set key {no}enhanced" property to the key title as well as to the individual plot titles. Bugfix. 2014-05-19 Ethan A Merritt * src/wxterminal/wxt_gui.h: Apparently wxWidgets3 (wxgtk3) threads call into Xlib but fail to initialize X threading before doing so. Therefore we must call XInitThreads before forking wxt threads. Bug #1401 2014-05-19 Karl Ratzsch * term/emf.trm: Add point types pentagon (14) and filled pentagon (15) 2014-05-16 Ethan A Merritt * src/term.c (load_linetype): As documented, "set linetype cycle N" should only affect line properties (color, width, dash), not point properties (type, interval, size). This got lost somewhere, which meant point types > linetype_recycle_count were never used by default. Now they are. This means that, as intended, 'with linespoints' cycles through (linetype_recycle_count * terminal's_max_point_type) distinct combinations before repeating so long as those two numbers are mutually prime. Unfortunately that's not guaranteed and is terminal- dependent. We really need a "set pointtype cycle M" command also so that you can choose M to be prime relative to N. Bugfix. * INSTALL docs/gnuplot.doc: Update description of new features. 2014-05-15 Ethan A Merritt * configure.in PATCHLEVEL src/version.c docs/titlepag.tex: Bump version information to 5.0.rc1 * demo/dashtypes.dem: Avoid irrelevant warning message. 2014-05-14 Karl Ratzsch * term/svg.trm src/wxterminal/gp_cairo.c: Add point types pentagon (14) and filled pentagon (15) * src/qtterminal/QtGnuplotItems.cpp: (EAM) Add point types pentagon (14) and filled pentagon (15) 2014-05-13 Ethan A Merritt * src/command.c src/tables.c src/tables.h: Remove undocumented routine test_time(). It was never updated to handle sub-second time precision, and in any case the functionality is now covered adequately by "print strptime()" and "print strftime()". * src/color.c (filled_polygon_3dcoords filled_polygon_zfixed) src/pm3d.c (filled_color_contour_plot): The option "set pm3d at C" is undocumented and doesn't work anyhow. Wrap the corresponding code in #ifdef PM3D_CONTOURS . This disabled code may or may not be useful for some future implementation of filled contours. * term/post.trm (PS_dashtype): Always stroke the previous path before setting a new dashtype. 2014-05-11 Hans-Bernhard Broeker * src/util.c (LOCAL_BUFFER_SIZE): New constant. (gprintf): Use constant to identify buffer size, instead of typing the same magic number multiple times. Insert warning about remaining magic number. * src/plot2d.c (get_data): Fix buffer overflow a bit more cleanly. (compare_boxplot_factors): Insert warning about magic number. 2014-05-11 Ethan A Merritt * src/plot2d.c (get_data): fix buffer overflow * src/datafile.c (f_stringcolumn): Return an empty string if asked for stringcolumn(N) on an empty field of a *.csv file. Otherwise it would return NULL which may cause a segfault later on. Bugfix. * src/datafile.c (df_readascii): If xticlabels(f(n)) returns a non-string value then do not generate an axis tic. It used to issue a warning about illegal string values but generated a tic anyway. 2014-05-10 Dima Kogan * src/mouse.c (do_zoom rescale_around_mouse): Handle various conditions that caused zooming around the current mouse position to fail. Re-applied after tracking down conflict. 2014-05-10 Shigeharu Takeno * docs/gnuplot.doc: various small corrections * docs/gnuplot-ja.doc term-ja.diff: Sync translation to version 1.887 2014-05-10 Ethan A Merritt * term/gd.trm: Do not allow setting terminal size to 0. Bug #1398 2014-05-10 Hans-Bernhard Broeker * term/lua.trm: Ensure initialization of alpha. * src/hidden3d.c (store_polygon): Ensure initialization of v[], just in case somebody calls this function with an illegal 'direction' enum value. * src/win/wgraph.c (PATTERN_BITMAP_LENGTH): Give name to magic number. (pattern_bitmaps): Use new name. * term/emf.trm (PATTERN_BITMAP_LENGTH): Give name to magic number. (pattern_bitmaps): Use new name and make const. (EMF_filled_polygon): Define pattern pointer more locally and make it point to const. Use named constant in loop. Fix table underrun. * src/win/wgnuplib.c (GetInt): Add some parentheses. * src/stats.c (statsrequest): Initialize local data structs, to avoid warnings about printing uninitialized results. * src/readline.c (BACKSPACE): Define as a character constant, not some hex number. (readline): Write TAB as character constant, not some hex number. * src/interpol.c (gen_interp_frequency): Ensure initialization of y_total regardless of smooth type. * src/plot3d.c (grid_nongrid_data): Ensure initialization of numpoints. * src/pm3d.c (pm3d_plot): Ensure initialiation of gray. All the following concern the same problem: Macros from cannot safely be called with arguments of type 'char' (because that may be signed). Such values have to be cast to unsigned char on passing. * src/win/wtext.c (TextPutStr): See above. * term/post.trm (PS_load_fontfile): See above. * src/win/winmain.c (GetLanguageCode, open_printer): See above. * src/util.c (streq): See above. * src/term.c (enhanced_recursion): See above. * src/scanner.c (legal_identifier, scanner): See above. * src/readline.c (backspace): See above. * src/plot2d.c (store_label): See above. * src/internal.c (f_word): See above. * src/gplt_x11.c (exec_cmd): See above. * src/eval.c (set_gpval_axis_sth_double): See above. * src/datafile.c (df_readascii, plot_option_binary_format): See above. * src/command.c (changedir, expand_1level_macros): See above. * src/breaders.c (edf_findInHeader): See above. 2014-05-08 Dima Kogan REVERT patch from 2014-04-26 because it broke normal zoom operations. * src/mouse.c (do_zoom rescale_around_mouse): Handle various conditions that caused zooming around the current mouse position to fail. 2014-05-08 Ethan A Merritt * src/axis.h (ACTUAL_STORE_WITH_LOG_AND_UPDATE_RANGE) src/plot2d.c (store2d_point) src/plot3d.c (get_3ddata) src/datafile.c (df_readascii) src/tabulate.c: Revised handling of NaN or Inf in the input data stream. The program used to set type=undefined for this point but left all the data fields untouched (i.e. left them containing random garbage). Version 5 fills in all data fields, including the one[s] containing NaN or Inf. This means that the output from "set table" matches the input data whereas before any line marked "u" contained garbage in the data fields. Note: For 3D data z=NaN or z=Inf is replaced by z=0. This is needed to avoid problems with image data. Possibly this special case should be handled in the image code itself rather than at the input stage. * src/plot2d.c (impulse_range_fiddling) src/plot3d.c: Don't extend range to zero for log-scaled axes. 2014-05-06 Ethan A Merritt * term/emf.trm: Custom dashtype support. * configure.in term/pdf.trm: Modify PDFlib terminal for use with version 5 dashtypes (but no custom dashtype support). Do not build by default. 2014-05-05 Ethan A Merritt * src/gp_types.h src/graphics.c (place_objects do_rectangle) src/misc.c (lp_parse) src/save.c (save_object) src/set.c (set_obj): Allow object borders to have a full set of line properties including dashtype. * docs/gnuplot.doc: Update documentation to better describe recent changes. * src/qtterminal/QtGnuplotScene.cpp: Always use a solid line to draw point symbols, even if the current linetype has a dash pattern. * term/cairo.trm term/canvas.trm term/post.trm term/svg.trm term/wxt.trm term/x11.trm src/term.c: Terminals that have been upgraded to version 5 dash handling should ignore the "dashed/solid" terminal setting. * src/plot2d.c (impulse_range_fiddling) src/plot3d.c: Autoscaled plots "with impulses" should include y=0 (z=0 in 3D) unless log-scaled. 2014-05-05 Tatsuro MATSUOKA * src/qtterminal/po/qtgnuplot_ja.ts: Update translations 2014-05-03 Ethan A Merritt * src/qtterminal/po/qtgnuplot_ja.ts: Update translations. 2014-05-01 Hans-Bernhard Broeker * config/mingw/Makefile (LDFLAGS2): Add auto-import flag. ($(TARGET)): Add icon files and Makefile as dependencies. * config/config.mgw, config/config.cyg: The set of used / available configuration macros has changed across the past several years. * src/stdfn.h (sgn): Fix parenthesization of macro. (PATH_MAX): CLang compiler on Cygwin needs a silly little tweak. * src/graphics.c (samesign): Improve parenthesization a bit. 2014-05-01 Ethan A Merritt * demo/gantt.dem demo/html/*: Add Gantt chart to demo collection. Add dashtypes to demo collection. * src/show.c: Show "fixed" property of arrow style. 2014-04-29 Ethan A Merritt * src/datafile.c (f_timecolumn): Replace the old 1-parameter function timecolumn(col) with a 2-parameter timecolumn(col,"timeformat"). The old version had no way to handle time data that didn't correspond to a coordinate on a plot axis in time format (e.g. set xdata time). It would segfault if the function appeared in a using spec slot >= 2. Now we require an explicit format, so data input is dissociated from any particular axis or time setting. Bug #1394 * src/gplt_x11.c term/x11.trm term/xlib.trm: Custom dashtype support for X11. 2014-04-28 Dima Kogan * src/mouse.c src/mouse.h src/set.c src/show.c docs/gnuplot.doc: Remove the distinction between "coordinate format echoed to the screen during mousing" and "coordinate format saved to the clipboard on click". This removes the default bindings for hotkeys 3 and 4. 2014-04-28 Shigeharu Takeno * docs/gnuplot-ja.doc term-ja.diff: Sync translation to version 1.882 * docs/gnuplot.doc: typos 2014-04-28 Ethan A Merritt * src/graphics.c src/graph3d.c src/save.c src/show.c: Use named values LAYER_{BEHIND|BACK|FRONT} rather than magic numbers. * docs/gnuplot.doc: Add a section documenting the use of layers. 2014-04-27 Dima Kogan * src/gplt_x11.c: Fix off-by-one error in selection string. Allow clipboard contents to be retrieved more than once. 2014-04-27 Ethan A Merritt * src/graphics.c (plot_steps): Avoid overflow in clipping code. ==> Reverted in favor of fixing the clipping code itself. * src/gadgets.c (clip_line): It is not safe to use (A*B >= 0) as a substitute for the test (sign(A) != sign(B)). It fails when A and B are integers and their product overflows. Bugs #1390, #1392 See also Bug #1358 * src/stdfn.h: Define a sgn() function. * src/graphics.c: Use sgn() function to define samesign(). * src/mouse.c: No longer need a local definition of sgn(). 2014-04-26 Dima Kogan * src/mouse.c (do_zoom rescale_around_mouse): Handle various conditions that caused zooming around the current mouse position to fail. Bug #1380 [REVERTED 2013-05-08 because it broke normal zoom] 2014-04-25 Ethan A Merritt * src/misc.c (lp_parse): Disallow defining "set lt N lt M". This used to mean "define effective linetype N to be the hidden device specific linetype M", except that in other contexts it meant "use effective linetype M rather than effective linetype N". Version 5 distinguishes between color and dashpatten, so require an explicit command to set one or both rather than an ambiguous old-style request. * src/save.c (save_pm3dcolor save_linetype): Save special linetypes by keyword rather than a magic number (e.g. lt bgnd rather than -3). 2014-04-24 Ethan A Merritt * src/gp_types.h src/misc.c (lp_parse) src/misc.h src/plot2d.c src/plot3d.c src/set.c: Revise the parameters passed to lp_parse() so that the legal options can vary depending on the identity of the caller. * src/term.c (test_term): Reset to default font after Bold/Italic test. Bug #1387 2014-04-24 Dima Kogan * src/mouse.c (do_zoom_scroll_up): Fix typo that causes incorrect manipulation of y2 axis scale during zoom. Bug (Patch #647) 2014-04-23 Ethan A Merritt * src/command.c src/graph3d.* src/set.c src/show.c src/save.c docs/gnuplot.doc: Introduce a scale parameter "set view map {scale}" and set the default size of a plot in this mode to approximately the same as a default 2D plot. * src/command.c (replotrequest): It's now OK to have a range in a replot command, since it can be applied to the new plot piece only. * src/datafile.c (df_readascii): If a read request returns a string rather than a numerical value, nevertheless fill in the numerical value as NaN. This is better than leaving some random garbage there (in practice probably some earlier data value). Bugfix. 2014-04-21 Ethan A Merritt * term/canvas.trm: Support for custom dashtypes. 2014-04-20 Jérôme Lodewyck * src/qtterminal/po/*.ts: Update translations. * src/qtterminal/qt_conversion.cpp: Add new encoding types. * src/qtterminal/QtGnuplotEvent.* src/qtterminal/QtGnuplotWindow.cpp src/qtterminal/qt_term.cpp src/wxterminal/wxt_gui.cpp src/wxterminal/wxt_term.h term/qt.trm term/wxt.trm: new terminal option "position" that specifies the initial position of the plot window. Applies to Qt and wxt terminals. Feature request #386. 2014-04-19 Ethan A Merritt * src/command.c (test_command): When "test" is issued before any plot command, suppress error messages if the window is resized. * term/PostScript/prologue.ps term/PostScript/prologues.h: Update PostScript prolog for version 5 and regenerate headers. * term/post.trm: Support for custom dashtypes in PostScript output. 2014-04-18 Ethan A Merritt * term/svg.trm (set_dashtype): Fix potential buffer overrun; * src/misc.c (parse_dashtype): A custom pattern must contain an even number of entries. * demo/dashtypes.dem demo/all.dem: New dashtype demo. * src/qtterminal/QtGnuplotEvent.h src/qtterminal/QtGnuplotScene.cpp src/qtterminal/qt_term.cpp src/qtterminal/qt_term.h term/qt.trm: Support for custom dashtypes and dashlength in qt terminal. Change implementation of "lt nodraw" from background color to NoPen. * src/term.c (enhanced_recursion): Consume only a single space following the font name in an enhanced text string "{/Fontname text}". * docs/gnuplot.doc: Initial documentation for `set dashtype` and dash properties in version 5. 2014-04-17 Ethan A Merritt * src/misc.c (parse_dashtype) src/save.c (save_dashtype) src/term_api.h src/term.c (term_apply_lp_properties) demo/dashcolor.dem: Fix some glitches found while testing custom dashtypes. * src/term.c (test_term): Exercise bold/italic. Longer line samples to make it easier to distinguish dashtypes. Minor layout changes. * term/svg.trm: Support for custom dashtypes. * src/wxterminal/gp_cairo.* src/wxterminal/wxt_gui.* src/wxterminal/wxt_term.h term/cairo.trm term/wxt.trm: Support for custom dashtype in all cairo-based terminals. 2014-04-14 Dima Kogan * src/mouse.c (event_buttonpress): Flip direction of horizontal scrolling to match the convention used by vertical scrolling. 2014-04-14 Ethan A Merritt * configure.in (AC_FUNC_FSEEKO) src/datafile.h: LFS support part 2. If possible, use fseeko/ftello to navigate input data files. 2014-04-13 Ethan A Merritt * configure.in (AC_CHECK_TYPES([off_t])) src/syscfg.h (#define off_t) src/binary.c src/datafile.c src/datafile.h: Change the declared type of all variables contributing to calculation of file offsets from (int) to (off_t). This is sufficient to allow seeking in files > 2GB on 64bit platforms. It may also allow LFS support on some 32bit platforms if compiled with -D_FILE_OFFSET_BITS=64 but in general it will also be necessary to replace fseek/ftell with fseeko/ftello (32bit linux) or _fseeki64/_ftelli64 (MSVC). 2014-04-11 Ethan A Merritt * src/datafile.c (df_binary_details[]): Handle int64 and uint64 types even if current platform has sizeof(long) = 4. Bugfix 2014-04-08 Ethan A Merritt * src/save.c (save_linetype) src/misc.c (lp_parse) src/graphics.c (plot_lines) src/graph3d.c (do_3dplot plot3d_lines) src/boundary.c (do_key_sample): New linetype keyword "nodraw" maps to existing internal value LT_NODRAW. Apply this in the graphics layer rather than the terminal layer in order to distinguish between line properties and point properties. I.e. this draws blue points but no lines: plot $FOO with linespoints lt nodraw pointtype 6 lc rgb "blue" * src/term.c (term_apply_lp_properties): Distinguish between l_type values that really indicate a linetype (e.g. LT_NODRAW, LT_AXIS) and those which indicate a dash pattern. Send the former directly to term->linetype(). Send the latter to term->dashtype(), which may itself call term->linetype() if there is no private implementation of dashes. 2014-04-07 Ethan A Merritt * src/term.c (null_dashtype): Ignore custom dashtypes. Pass through dashtypes > 0 to term->linetype(). Treat negative dashtypes as LT_BLACK. This should allow terminals without a private dashtype implementation to continue working as they did before (pre-version 5). * src/plot2d.c (eval_plots): Don't call lp_parse if all we want is a fill color. * src/boundary.c (do_key_sample) src/graphics.c (plot_boxes plot_c_bars): Funnel requests for linetype changes through term_apply_lp_properties(). * demo/all.dem: Add varcolor.dem to the test set. 2014-04-06 Christoph Bersch * src/graphics.c (fill_between): It is no longer necessary to clip in this routine because the component quadrilaterals will be clipped later. 2014-04-05 Ethan A Merritt * src/set.c (set_table): Name leak. 2014-04-05 Bastian Maerkisch * demo/vector.dem docs/gnuplot.doc src/command.c src/datablock.c src/datablock.h src/gadgets.c src/gadgets.h src/plot2d.c src/set.c src/tabulate.c src/tabulate.h src/unset.c src/util.c src/util.h: 'set table $datablock' redirects table output to a named data block. Patch #662 2014-04-04 Ethan A Merritt * src/term.c (load_linetype): If a line style is based on a lt < 0 (LT_NODRAW, LT_BACKGROUND, LT_BLACK, etc), take only the line color. FIXME: LT_AXIS should also take the dash pattern but that mechanism isn't fully in place yet. Bug #1369 * src/util.c (value_to_str): Fix error in buffer length accounting. Bug #1372 * src/alloc.c src/alloc.h src/bf_test.c: The conditional code in alloc.c for tracking memory allocation/free has bit-rotted to a point where the program segfaults on entry if it is enabled. Since this sort of accounting is now better done using valgrind it is not worth fixing the old code. Delete it. * src/alloc.c: Although freeing old help messages may free some memory, entangling the help system with every memory allocation seems excessive. If we're about to run out of memory there are deeper problems than old help messages. * configure.in: Remove EXPERIMENTAL warning from older options. * src/save.c src/set.c src/term.c: Code style / whitespace cleanup * src/set.c (set_dashtype) src/misc.c (parse_dashtype): Add comments. Truncate dashtype string to match size of stored pattern array. 2014-04-03 Bastian Maerkisch * src/fit.h (error_ex): Add noreturn attribute to avoid compiler warnings. * src/fit.c: Correct test for invalid covariance matrix. * src/util.h (int_error, os_error, graph_error): noreturn attribute for MSVC. * src/wgdiplus.cpp (drawgraph_gdiplus) src/win/wgraph.c (drawgraph): Test if command list is available. * src/win.trm (WIN_update_options) src/win/wmenu.c: Incomplete format strings. 2014-04-02 Ethan A Merritt * src/misc.c demo/heatmaps.dem docs/gnuplot.doc: Document and add a demo for "with image pixels" (formerly "failsafe"). * src/color.c src/plot3d.c src/pm3d.c src/pm3d.h src/save.c src/set.c src/show.c src/tables.c src/tables.h src/term.c src/unset.c: Revise "set pm3d hidden3d " to match other places where you can specify line properties. - Full syntax is now "set hidden3d {no}border {line-properties}" - Individual line properties can be overridden in the plot command - Old sytax is accepted as a synonym for "set hidden3d border lc " * demo/transparent_solids.dem docs/gnuplot.doc: Update documentation and demo to show new syntax * src/contour.c (end_crnt_cntr): Initialize blank label in new contour. 2014-04-01 Ethan A Merritt * src/command.c (test_palette_command): Write the palette colors into a datablock $PALETTE rather than writing them as in-line data in a temp file. Simplify the internal command sequence that generates the test output. TODO: Move the command sequence into a datablock as well. 2014-03-30 Bastian Maerkisch * term/caca.trm: Change codepage from 932 to 437 on Japanese Windows. Apparently this fixes display problems, although libcaca uses unicode functions to write to screen. Bug #1361 * src/eval.c src/internal.c|h src/parse.c: Implement f_words instead of treating it as a special case in the parser. * src/command.c src/command.h src/plot.c src/stdfn.h src/syscfg.h src/win/wgraph.c src/win/winmain.c src/win/wprinter.c: Include file cleanup. * src/win/screenbuf.c: Avoid crashes on memory allocation errors. * src/makefile.all src/makefile.awc: Recreate to include multiplot.c. * demo/lines_arrows.dem: UTF-8 encoding. * config/mingw/Makefile: Fix non-numeric version number due to patchlevel "alpha". 2014-03-29 Christoph Bersch * src/multiplot.h src/multiplot.c demo/layout.dem docs/gnuplot.doc: New autolayout options for multiplot: set multiplot layout margins LEFT, RIGHT, BOTTOM, TOP spacing GAP Patch #611 2014-03-29 Ethan A Merritt * src/term.c (multiplot_current_panel) term/svg.trm src/term_api.h: Hide internal data structure behind an access function. * src/multiplot.h src/multiplot.c src/term.c src/term_api.h src/Makefile.am: Move multiplot layout code from term.c into a new file multiplot.c. 2014-03-27 Shigeharu Takeno * docs/gnuplot-ja.doc term-ja.diff: Sync translation to version 1.872 * docs/gnuplot.doc: typos 2014-03-27 Dima Kogan * docs/gnuplot.doc 2014-03-27 Ethan A Merritt * src/qtterminal/qt_term.cpp (qt_text_wrapper): Prevent segfault on "set term qt; set multiplot; quit". 2014-03-24 Ethan A Merritt * src/graphics.c (place_objects do_rectangle): When fillcolor for an objects is given as a linecolor it should be interpreted as referring to a current linetype. * src/command.c: clean up to remove compiler warnings. * term/emf.trm: Bold/Italic markup in enhanced text mode * src/boundary.c (do_key_sample_point) demo/lines_arrows.dem: Apply textcolor to character point type in key sample. 2014-03-23 Bastian Maerkisch * src/command.c src/command.h src/datablock.c src/datablock.h src/set.c src/show.c src/unset.c docs/gnuplot.doc demo/ellipse.dem demo/fitmulti.dem demo/gen-random.inc demo/rugplot.dem: Implement 'set print $datablock' which redirects 'print' output to an in-memory datablock. Patch #662 * src/setshow.h src/show.c src/util.c src/util.h: Factor out new routine value_to_str() which returns a string representation of a struct value from disp_value(). * demo/tango_colors.dem: set linetype cycle. * docs/plotstyles.gnu: Encoding is utf8. * src/win/wcommon.h src/win/wgraph.c: Fix const-ness for enhanced_recursion(). * src/util.c (gprintf): Skip leading zeroes of negative exponents. 2014-03-22 Ethan A Merritt * docs/gnuplot.doc docs/doc2tex.c docs/titlepag.tex: Update documentation New Features, Changes for version 5. * src/plot.c (init_session) src/set.c (set_colorsequence) src/setshow.h src/show.c src/tables.c src/tables.h src/term_api.h: New command: set colorsequence {default | classic | podo} Built-in command to select one of the linetype color sequences provided in .../share. The default sequence is visibly changed from the old red/green/blue ugliness, which should make users immediately aware that the colors can be customized. * src/set.c (set_linestyle): Dash type of newly created linetype should by solid unless otherwise specified. * src/misc.c: Allow `black` as a colorspec or linetype, analogous to `bgnd`. 2014-03-21 Ethan A Merritt * src/parse.c (check_for_iteration next_iteration): Replace overly clever checks for end condition already satisfied with one that doesn't fail due to overflow of integer multiplication. Bug #1358 * src/term.c (enhanced_recursion) term/post.trm(ENHPS_OPEN): The bold/italic support code has revealed a problem with PostScript output. The core code assumes that passing a blank font name means "keep the previous font" or at worst "use the default font". post.trm failed to do this for some command sequences. Fix it in two places. In term.c pass the previous font if we already know it. In post.trm fall back to the default rather than place a blank string in the ouput *.ps file. Bug #1359 2014-03-20 Bastian Maerkisch * src/set.c src/term.c src/term_api.h src/util.c src/win/wgraph.c src/wxterminal/gp_cairo.c term/aquaterm.trm term/pdf.trm term/post.trm term/pslatex.trm term/svg.trm: Add support for codepage 1252, the standard Western European encoding on Windows. * src/set.c: "set encoding locale" only handles utf8 and sjis. Extend this to all supported encodings on Windows, probably the only platform where this is still relevant. Bug #1270 * demo/dashcolor.dem: UTF-8 encoding. * src/fit.c (show_results): Do not try to print parameter errors if the covariance matrix is unavailable or invalid. 2014-03-20 Thomas Henlich * term/PostScript/cp1252.ps: CP1252 encoding support for PostScript terminal. Based on Patch #341, but with non-standard characters removed. 2014-03-20 Ethan A Merritt * term/svg.trm: svg was losing the current linetype (i.e. dash type) between drawing the key sample and drawing the main plot. 2014-03-19 Bastian Maerkisch * src/stdfn.c src/stdfn.h src/internal.c src/win/winmain.c src/win/wtext.h config/config.nt: Standard compliant replacements of snprintf() and vsnprintf() for MSVC. Note that _snprintf does set errno=ERANGE if the destination buffer is too small. 2014-03-19 Ethan A Merritt * src/plot2d.c: Fix parsing error for "with lp pt 'X', ..." * src/boundary.c src/boundary.h src/graphics.c: Refactor code that draws key samples for point plots. * configure.in term/gpic.trm src/term.h: Add configuration option --with-gpic * configure.in src/term.h: FrameMaker now allows import of svg, so the utility of the ancient mif v3 support is dubious. Disable by default. Add configuration option --with-mif * demo/lines_arrows.dem demo/stringvar.dem demo/html/Makefile demo/html/index.* demo/html/webify.pl: Update demos for version 5. 2014-03-19 Hans-Bernhard Broeker * src/misc.c (parse_dashtype): Avoid warning about assignment used as a condition value. Some reindentation. 2014-03-19 Jérôme Lodewyck * src/qtterminal/QtGnuplotScene.cpp src/qtterminal/QtGnuplotItems.h src/qtterminal/qt_term.cpp: Implement image clipping for the Qt terminal. Fix issue with unsigned variables in terminal coordinates. Bug #1349 2014-03-18 Peter Juhasz * src/term.c src/set.c: Fix leaks and invalid reads associated with dashtype strings. 2014-03-18 Ethan A Merritt * src/wxterminal/gp_cairo.c: PANGO_WEIGHT_NORMAL is not the same as 0. * term/x11.trm: Make the "persist" flag local to x11 and remember what is was the last time we set the terminal to x11. Bug #1348 2014-03-18 Jérôme Lodewyck * src/qtterminal/QtGnuplotEvent.* src/qtterminal/QtGnuplotWindow.cpp src/qtterminal/QtGnuplotWidget.cpp src/qtterminal/QtGnuplotScene.cpp: Block events that come from inactive plot widgets. 2014-03-17 Peter Juhasz * src/term_api.h src/misc.c src/misc.h src/save.c src/save.h: Parse and save dashtype specification in the form of "-_. " or "(1.0, 0.3, 1.5, 2.0)". In the latter form alternating numbers specify dash lengths and spaces between them. * src/gadgets.c src/gadgets.h: Added new type custom_dashtype_def and global variable first_custom_dashtype in preparation of new "set dashtype" command. * src/gadgets.h src/misc.c src/set.c src/setshow.h src/show.c src/tables.c src/tables.h src/term_api.h src/unset.c: New commands 'set|show|unset dashtype ' to specify permanent, user-defined dashtypes. * src/termp_api.h src/term.c src/misc.c: lp_parse() loads dashtype from the list of user-defined dashtypes if the absence of an explicit definition. 2014-03-16 Ethan A Merritt * src/axis.c src/axis.h src/gadgets.c src/gadgets.h src/graphics.c src/misc.c src/plot2d.c src/set.c src/term_api.h docs/gnuplot.doc docs/plotstyles.gnu: New point type that consists of a single character (possibly a multibyte character). This is particularly useful as plot $FOO with linespoints pointtype "#" pointinterval -1 where # is the desired character drawn at each point. 2014-03-16 Peter Juhasz * src/term_api.h src/term.c src/misc.c src/plot2d.c src/plot2d.c src/set.c src/save.c src/graphics.c src/gadgets.c src/gadgets.h: Introduce new "dashtype" line property that controls dot/dash pattern independently. Allow it in "set|show linetype|linestyle", "plot", etc., display it in "save". Only numeric "dashtype N" supported for now. New function dashtype() added to termentry struct, but none of the terminals use it yet. * src/set.c (set_linestyle): Set pm3d_color.type to TC_LT and pm3d_color.lt to line number by default. This is necessary because since the use_palette flag was removed, pm3d_color information is used everywhere, yet, it was not set properly. This resulted, among others, a broken "show linetype" output with empty "linecolor" spec. 2014-03-16 Hans-Bernhard Broeker * src/axis.h (en_minitics_status): Give enum a typedef name, too. (axis): Use new type for element of AXIS struct, instead of int. * src/axis.c (gen_tics): Simplify by using local OO-like "this" pointer variable. Remove pointless local variable "minifreq". Treat "minitics" variable as a proper enum everywhere (no set/compare to zero). 2014-03-15 Ethan A Merritt * configure.in VERSION PATCHLEVEL share/gnuplotrc src/version.c demo/html/index.canvas demo/html/index.save demo/html/index.svg docs/doc2texi.el docs/gnuplot.doc docs/titlepag.tex: >>>>> Bump version to 5.0 alpha <<<<< >>> Earlier entries are in ChangeLog.4