RELEASE NOTES FOR FastQC v0.12.0 -------------------------------- This release introduces new functionality as well as resolving some existing problems. - Fix bugs in the per tile plot if zero length sequences are present - Add a count of total bases to the Basic Stats output - Use better sorting of the best contaminant finding - Add a "dup_length" option to specify the length of sequence used for detecting duplicates - Made the default duplicate detection length 50bp, regardless of the length of the library. Previously only sequences over 75bp were truncated, now the limit applies to everything - Removed the plot of deduplicated duplication levels from the duplication plot since it just confused people and everyone ignored it. - Fixed a bug in iterating through fast5 files in multiple directories - Fixed a documentation bug in the Duplicate plot - Improved memory handling - default allocation is now 512MB and there is a --memory option which can increase the allocated memory without having to play with --threads - Colours in the per base sequence composition plot have been changed to be more colourblind friendly - BAM parsing now uses htsjdk on the back end - Add a --svg option to make the report use SVG graphics instead of PNG. The zip file will always contain both PNG and SVG versions of all figures - Add line numbers to error messages where parsing errors occur - Add an option to delete the zip file if it is uncompressed during processing (add --delete on top of --extract) - The default adapters removed the SOLID adapter, but added polyA and polyG since these can both provide useful information and are often trimmed from sequences in a similar manner to adapters. RELEASE NOTES FOR FastQC v0.11.9 -------------------------------- This is a bugfix release which resolves some issues with the program; - We removed the native look and feel from the linux application since it's horribly broken - Fixed a hang if a run terminated from an out-of-memory error - Fixed a corner case where adapters could occasionally be double-counted - Updated the fast5 parser to account for the newer format multi-read oxford nanopore fast5 files - Fixed problems if analysing a completely blank file RELEASE NOTES FOR FastQC v0.11.8 -------------------------------- This release works around some edge cases in unusual sequence libraries and changes the behaviour of the read length module when run with the --nogroup option. Other minor fixes are also present. RELEASE NOTES FOR FastQC v0.11.7 -------------------------------- This is a bugfix release for a bug introduced in 0.11.6. Specifically this version would crash if the first sequence in a file was <12bp (or less than the length of the longest adapter if a custom adapters file was being used). RELEASE NOTES FOR FastQC v0.11.6 -------------------------------- This update fixes some bugs and updates some of the functionality to accommodate changes in some of the sequencing platforms. There is one major change which is that by default we now disable the kmer module. With the inclusion of the adapter plot the value of the information in the Kmer plot is often not great, and it is easy to confound it if there are any over-represented sequences, or primer compositional bias. Overall therefore we consider it best to not routinely include this module. If you want to turn this module back on, then simply edit the limits.txt file in the Configuration folder of the FastQC installation and change the line near the top which says: kmer ignore 1 ..to.. kmer ignore 0 ..and the module will be re-enabled. Other changes in this release are: 1) Fixed a bug which prematurely abandoned the adapter content plot when long custom adapters were being used. 2) Changed the cutoff for the maximum number of tiles to allow for the novaseq which has lots of them. 3) Fixed a bug in the parsing of tile numbers on some illumina sequencers 4) Added some new Clontech sequences to the contaminants list. 5) Made the --nanopore option work with the new multi-folder ONT folder structure 6) Added an option to specify a file name when streaming data into FastQC 7) Added new RDF paths to check for fastq data in nanopore fast5 files 8) Fix parsing of newer nanopore base names to correctly collate sequences 9) Fixed a typo in the documentation for the per tile plot documentation 10) Added a --min-length option to ignore short sequences making it easier to generate directly comparable statistics between runs. RELEASE NOTES FOR FastQC v0.11.5 -------------------------------- This is a minor bug-fix release which addresses issues found in the previous release. 1) Fixed a bug in the per-base sequence content module where the warn error flags were incorrectly being calculated on G-A and C-T instead of G-C and T-A. 2) Fixed the small-RNA adapter molecule sequence so that all possible adapter variants would be found - the previous version would under-estimate the amount of small RNA adapter which was present in a sample. 3) Fixed a typo in the documentation for the duplication plot. RELEASE NOTES FOR FastQC v0.11.4 -------------------------------- This is a minor bug-fix release which addresses issues found in the previous release. 1) Changed the OSX launcher to not rely on the Mac specific JVM framework, but to use any command line java which is found. This will require the user to install the JDK on newer OSX releases rather than just the JVM. See the updated version of the INSTALL.txt document if you have problems with this on OSX. 2) Fixed a typo in one of the included adapter sequences in the search set. 3) Fixed a bug which failed to remove an fq.gz extension from the name used in the report when running in offline mode. 4) Made the per-tile quality module not collect any stats if it's been disabled in limits.txt, rather than just not being included in the output. 5) Fixed a bug in the calculation of duplication levels which only affected highly duplicated ordered libraries where the count limit was not reached. 6) Fixed a bug which triggered an error flag on the per-base quality plot for positions with fewer than 100 observations, where we can't calculate a sensible percentile value. Changed the text report to assign NaN to these positions rather than 0. RELEASE NOTES FOR FastQC v0.11.3 -------------------------------- This is a minor bug-fix release which addresses some issues reported with the v0.11.2 release. 1) Fixed a bug when using the limits.txt file to disable the per tile analysis module. 2) Fixed a documentation error in the duplicated sequences plot. 3) Fixed a thread safety bug when processing multiple files in a single session which caused the program not to exit when all processing had in fact completed. 4) Fixed a bug which meant that forced formats in the interactive application weren't being honoured. 5) Fixed a bug in the way soft clipping was applied when we were analysing only mapped data. 6) Fix a memory issue when trying to parse tile names in cases where we mistakenly think we're identify tile numbers, but we aren't 7) Fix a bug in the text reporting of per-tile quality scores 8) Add the SOLID smallRNA adapter to the default adapter search set 9) Fix a bug in casava mode when using uncompressed fastq files 10) Increase the number of sampled sequences in the duplicate and overrepresented module to 100,000. 11) Add a clean up of data structures for the Kmer module so that the interactive mode can process more files without dying. RELEASE NOTES FOR FastQC v0.11.2 -------------------------------- This is a minor bug-fix release which addresses some issues reported with the v0.11.1 release. 1) Added a proper implementation of a --limits command line option to allow users to specify a custom limits file for an individual run. This also fixed a bug seen if the user used the --adapter option. 2) Fixed an error in the naming of the folder inside the zip file such that it couldn't be extracted into the same folder as the main HTML file. 3) Fixed an overly large data structure which was causing some runs to terminate due to a lack of memory. 4) Fixed a poor implementation in the Kmer module which was causing unusually high memory usage. 5) Fixed incorrect defaults for the warn/fail values in the per sequence quality module. RELEASE NOTES FOR FastQC V0.11.1 -------------------------------- FastQC v0.11.1 is the first release for a long time and is a major update to the package. This release adds some significant new features to the program which will hopefully make it more useful. The major new features in this release are: 1) Configurable thresholds for modules. For all modules you can now alter a configuration file to set the thresholds used by the program for warnings and errors so that you can flag up only the types of problem which you are concerned by. 2) Optional modules. The same configuration file used to set the warn / error thresholds can also be used to selectively disable modules you don't want to see at all. 3) New per-tile quality analysis. If you are running Illumina libraries through FastQC it will now analyse the quality calls on a per-tile basis and will flag up points in the run where the quality in individual tiles fell below the average quality for that cycle. This can help to spot technical problems during the run. 4) New adapter content module. A new module has been added to specifically search for the presence of adapters in your library. This operates in a similar way to the existing Kmer analysis but allows you to specify individual adapter sequences to screen and will always show the results for each adapter so you can easily see what you might gain if you chose to adapter trim your library. 5) Improved duplication plot. The duplication plot has been given an overhaul so that it now reports values which are real read numbers rather than always giving relative values. This is thanks to work done by Brian Howard of sciome.com who worked out the right way to extrapolate from the data we sample to the full library. It also shows how the level of duplication would affect the library both before and after deduplication, and the headline figure is now much more useful as it shows the percentage of the library which would remain if you chose to deduplicate. 6) Improved Kmer module. The Kmer module has been changed so that instead of trying to search for individual Kmers which are present at higher than expected frequency (which actually happens all the time in real libraries), it now looks for Kmers which are present in significantly different amounts at different starting positions within the library. This has allowed the use of longer Kmer sequences to give a more useful result. 7) Since file reports. The default output format for the program is now a single HTML file with all of the various graphs embedded into it. The .zip file output with the individual graphs is still produced as are the associated data files, but you can just distribute the one HTML file alone - the other data is no longer required. 8) Ability to read from stdin. If you want to pipe a stream of data into fastqc rather than using a real file then you can just use 'stdin' as the filename to process and then stream uncompressed fastq data on stdin. 9) Changed base groupings. For long reads we used to use an exponential series to group bases together to summarise the sequence content and qualities. We've now switched the default to be that for grouped plots the first 9 individual bases will always be shown (since this often roots out problems in the libraries), after that there will be a series of evenly sized windows so that the same number of bases fall into each window. You can bring back the old behaviour with the new --expgroup option, and you can remove grouping all together with the --nogroup option (although this will do bad things to your plots if you have really long reads). 10) Dropped support for the Solaxa64 (but NOT Phred64) encoding. We have removed the ability of the program to reliably detect the original Solexa64 encoding which was used in the GA pipeline prior to v1.3. This was a 64 offset encoding but which allowed scores which ranged down to -5. Supporting this encoding meant that we would incorrectly guess the encoding on Phred33 files which had no bases with quality scores below 26, which could happen if you aggressively trimmed your data. Supporting just Phred33 and Phred64 now means that we wouldn't mis-detect unless there were no bases with qualities below 31, which is much less likely, even in trimmed data. Since no Solexa64 data will have been produced since early 2009 it is unlikely that removing support for this format will adversely affect users of the program. RELEASE NOTES FOR FastQC V0.10.1 -------------------------------- FastQC v0.10.1 is a bugfix release which works around two problems people have encountered with previous releases: 1) A work-round has been put into place for a limitation in the java gzip decompressor, where it would read only the first compressed block in a file created by concatenating multiple gzipped files directly, rather than decompressing and recompressing them. 2) Users who had installed the program in directories containing characters required to be encoded in URLs (= & ? etc) were finding that the report generation generated an error. This encoding has now been fixed and the program should now have no limits in the name of the directory in which it can be installed. One additional feature is that in the fastqc wrapper you can now specify the location of the java interpreter on the command line using the --java parameter, rather than having to have it included in the path. One other change in this release is that the package names for all of the java classes have been changed to reflect a change in the official project URL. This means that the launchers for the program have had to be updated to use these new names. If you have created your own launcher, or had copied any of the old ones you'll need to update this to use the launchers included in this version of the program. The new URL for the project is: www.bioinformatics.babraham.ac.uk/projects/fastqc/ ..and if you want to report bugs the bugzilla URL is now: www.bioinformatics.babraham.ac.uk/bugzilla/ RELEASE NOTES FOR FastQC V0.10.0 -------------------------------- The major feature of FastQC v0.10.0 is the addition of support for fastq files generated directly by the latest version of the illumina pipeline (Casava v1.8). In this version the pipeline generates gzipped fastq files by default rather than using qseq files which can then be converted to fastq. However the fastq files generated by casava are unusual in two ways: 1) A single sample produces a set of fastq files with a common name, but an incrementing number at the end. 2) Casava FastQ files contain sequences from clusters which have failed the internal QC, and been flagged to be filtered. FastQC v0.10.0 introduces a Casava mode which will merge together fastq files from the same sample group and produce a single report. It will also exclude any flagged entries from the analysis. You would therefore run FastQC as normal but selecting all of the fastq files from Casava and using casava mode for your analysis. Casava mode is activated from the command line by adding the --casava option to the launch command. From the interactive application you need to select 'Casava FastQ Files' from the drop down file selector filter options. If you want to analyse casava fastq files without these extra options then you can use treat them as normal fastq files with no problems. In addition to this change there have also been changes to allow the wrapper script to work properly under windows, and a bug was fixed which missed of the last possible Kmer from every sequence in a library. RELEASE NOTES FOR FastQC V0.9.6 ------------------------------- FastQC v0.9.6 fixes a couple of bugs which aren't likely to have affected the majority of fastqc users: - Fixed a crash in the Kmer module when analysing a sequence where every sequence in a library contained a poly-N stretch at its 3' end. - Fixed the wrapper script so that OSX users launching fastqc through the script rather than the Mac application bundle get their classpath set correctly, and can therefore analyse bam/sam files. RELEASE NOTES FOR FastQC V0.9.5 ------------------------------- FastQC v0.9.5 fixes some bugs in the programs text output and improves a few things in the graphical interface. Main changes are: - Progress calculations are now exact and not approximate - The UI now has a welcome screen so you're not just presented with a blank screen when the program starts - The wrapper script now sets the classpath correctly in windows as well as linux. - The text report for per-base sequence content now reports correct values for grouped bases - The HTML report uses a custom stylesheet for print output so graphs aren't cut off when reports are printed. - Fixed a bug in testing for a warning in the per-base sequence content module. - Alt text in HTML reports now matches the graphic it describes RELEASE NOTES FOR FastQC V0.9.4 ------------------------------- FastQC v0.9.4 is a minor bugfix release which changes the offline version of the program so that if a file fails to be processed a full backtrace of the error is produced, rather than just a simple generic error message. RELEASE NOTES FOR FastQC V0.9.3 ------------------------------- FastQC v0.9.3 adds support for fastq files compressed with bzip2 in addition to its existing support for gzip compressed files. It's worth noting that although bzip2 offers a reduction in the file size of the compressed files (about a 5-fold size reduction compared to raw fastq. Gzip is a 4-fold decrease), there is a significant penalty in terms of the speed of decompression of these files. In our tests gzipped files were actually processed slightly faster than raw FastQ files, presumably due to the lower amount of data transfer from disk required, however bzip2 compressed files took around 6X as long to process as gzipped files. The other big change in this release is an update to the default CSS layout such that viewing the HTML reports doesn't require lots of scrolling up and down the page. As before the CSS can be edited and customised by editing the templates shipped with the program. Many thanks to Phil Ewels who did much of the work on the new layout. RELEASE NOTES FOR FastQC V0.9.2 ------------------------------- FastQC v0.9.2 fixes two bugs which were identified in the previous release. 1) In the text output for the per-base quality module the correct base numbers weren't being included for files which used grouped base ranges. 2) The Kmer analysis module could crash when analysing very small files, such that no position in the file had more than 1000 instances of an enriched Kmer. Both of these issues should now be resolved. RELEASE NOTES FOR FastQC V0.9.1 ------------------------------- FastQC v0.9.1 adds some new command line options and fixes a couple of usability issues. The new command line options are: --quiet Will suppress all progress messages and ensure that only warnings or errors are written to stderr. This might be useful for people running fastqc as part of a pipeline. --nogroup Will turn off the dynamic grouping of bases in the various per-base plots. This would allow you to see a result for each base of a 100bp run for example. This option should not be used for really long reads (454, PacBio etc) since it has the potential to crash the program or generate very wide output plots In addition to these the following changes have been made: The basic stats module now includes a line to say which type of quality encoding was found so this information isn't just present in the header of the per-base quality plot, and will appear in the text based output. We now distinguish between Illumina <1.3, 1.3 and 1.5 encodings rather than just <1.3 and >=1.3. The Sanger encoding is now labelled as Sanger / Illumina 1.9+ to allow for the change in encoding in the latest illumina pipeline. A bug was fixed which caused the program to crash when encountering a zero length colorspace file (which shouldn't happen anyway, but crashing wasn't the correct response). The interactive over-represented sequence table now allows you to copy out each cell individually which makes it easy to copy any unknown sequences into other programs. RELEASE NOTES FOR FastQC V0.9.0 ------------------------------- FastQC v0.9.0 makes a number of changes primarily targetted at datasets containing longer reads. It allows all of the analyses within FastQC to be completed sensibly and without excessive resource usage on runs containing reads up to tens of kilobases in length. For long reads the program now converts many of its plots to variably sized bins so that, for example you see every base for the first 10 bases, then every 5 bases for the next 40 bases, then every 50, then 100 then 1kb per bin, until the end of the sequence is reached. For sequences below 75bp the reports will look exactly the same as before. For groups running slightly longer Illumina or ABI runs you'll see some compression at the end of your reads, and people using 454 or PacBio will get sensible results for all analyses for the first time. One additional change which will impact anyone using reads over 75bp is that the duplicate sequence and overrepresented sequence plots now only use the first 50bp of each read if the total read length is over 75bp. This is because these plots work on the basis of an exact sequence match, and longer reads tend to show more errors at the end which makes them look like different sequences when they're actually the same. 50bp should be enough that you won't see exact matches by chance. RELEASE NOTES FOR FastQC V0.8.0 ------------------------------- FastQC v0.8.0 adds some new options for parsing BAM/SAM files and makes the graphs in the report easier to interpret. All graphs in v0.8.0 now have marker lines going across them to make it easier to relate the data in the graph to the y-axis. The per base quality boxplots have shading behind the graph to indicate ranges of good, medium and bad quality sequence. For BAM/SAM files you can now specify that you wish to analyse only the mapped sequences in the file. This is particularly of use to people working on colorspace data where the mapped data should produce reliable sequence, whereas the current raw conversion to base space may overrepresent any errors which are present. The option to use only mapped data is set by using the -f bam_mapped or -f sam_mapped option on the command line, or by specifying Mapped BAM/SAM files from the drop down file filter in the file chooser in the interactive version of the program. For FastQ files the parser has been updated to not treat blank lines between entries or at the end of the file as a format violation since many sequences in the public repositories can have this problem. From the command line we now offer the option to process multiple files in parallel by setting the -t/--threads option. Please note that using more than 1 thread will increase the amount of allocated memory (250MB per thread), so you need to be sure you have enough memory (and disk bandwidth) to be able to process more than one file. The interactive application still defaults to a single processing thread but you could theoretically change this by passing the correct java properties in the startup command. RELEASE NOTES FOR FastQC V0.7.2 ------------------------------- FastQC v0.7.2 fixes a bug in libraries where no unique sequences were observed. It also improves the collection of duplicate statistics on libraries with very low diversity. A new command line option has been added to allow the user to manually specify a contaminant's file rather than using the sitewide default. This would be useful if you have different sets of contaminants to screen against for different libraries, or if you wanted to make a custom set of contaminants, but didn't have sufficient privileges to modify the sitewide contaminants file. RELEASE NOTES FOR FastQC V0.7.1 ------------------------------- FastQC v0.7.1 makes some significant enhancements to the fastqc wrapper script which make it easier to use as part of a pipeline. You can now use normal unix options to create your fastqc command rather than having to pass java system properties. The old options will continue to work though, so the updated wrapper is still compatible with any previous commands you may have in place. Full details of the new options can be found by running fastqc --help One new option is the --format option which allows you to manually specify the input format of a file, rather than having FastQC guess the format from the file name. This would allow you to have a BAM file called test.dat and process it using: fastqc --format bam test.dat RELEASE NOTES FOR FastQC V0.7.0 ------------------------------- FastQC v0.7.0 introduces a new analysis module which looks at the enrichment of short sequences within the library. It is possible to get enrichment of unaligned subsequences to quite a high degree without this being apparent in any of the existing modules. This new module should find problems such as read through into the adapters at the other end of libraries, which other analyses would miss. Other changes in this release include: * Altering the fastqc wrapper script so it can identify when it's being used on the source distribution of the software so it can issue an appropriate warning. * Tidied up all of the y-axes on the graphs so that scaling should now always be perfect in all graphs. RELEASE NOTES FOR FastQC V0.6.1 ------------------------------- FastQC v0.6.1 is a bugfix release which fixes a problem with sequences from BAM/SAM files which map to the reverse strand of the reference. In these cases the sequence contained in the BAM/SAM file is reverse complemented and the qualities are reversed relative to the original sequence which came off the sequencer. In the previous release this meant that the plots were incorrectly showing a mix of forward and reversed sequences. In v0.6.1 any sequences mapping to the reverse strand of the reference are converted back to their original state before being analysed which should give a clearer view of the overall qualities and sequence biases within the run. RELEASE NOTES FOR FastQC V0.6.0 ------------------------------- FastQC v0.6 adds support for reading SAM/BAM files as well as still supporting fastq files. File type detection is based on the filename so SAM/BAM files need to be named .sam or .bam. Any other form of filename is assumed to be a fastq file. SAM/BAM reading was added through the use of the picard libraries, which means that the launcher for FastQC has had to be modified to include the picard libraries into the classpath. If you use the bat file launcher, the wrapper script or the Mac application bundle then you won't need to do anything to get the new version to work, but if you've created your own launcher then you will need to modify your classpath statement to include the sam-1.32.jar file into the classpath. The only other change in this release is that the line graphs have been improved to use smoother lines for the graphs. RELEASE NOTES FOR FastQC V0.5.1 ------------------------------- Release 0.5.1 fixes a couple of bugs and makes some improvements to existing functions. * A bug was fixed which caused the headers of the overrepresented sequences results to not be separated in the text output. * A bug was fixed which caused spikes to appear in the %GC profile when using read lengths >100bp * The fitting of the theoretical distribution to the %GC profile was improved * Some new entries were added to the contaminants file to cover Illumina oligos for multiplexing, tag expression and small RNA protocols (thanks to Aaron Statham for providing these) RELEASE NOTES FOR FastQC V0.5.0 ------------------------------- FastQC v0.4.4 makes a number of changes to the previous release which hopefully improve the relevance of the output. * The fitting of the normal curve to the %GC distribution has been improved for shorter sequences * Each section of the HTML report output now has a pass/warn/fail icon next to it, rather than just having them at the top * The duplicate level analysis now estimates the total percentage of sequences which are not unique, reports this on the graph and uses this as the basis for the pass/warn/fail filtering * The structure of the HTML output folder has been changed so that icons and images are put into subfolders so the only files at the top level are ones which the user is intended to open directly. RELEASE NOTES FOR FastQC V0.4.3 ------------------------------- FastQC v0.4.3 is a bugfix release which fixes a bug and adds an extra check to the interactive program. In versions of the program since v0.2 the total sequence count in the Basic Stats module may have been incorrect by a few percent (either high or low). This is because instead of using the real sequence count the module was using an estimated count which should only be used for updating the progress indicators. The module has now been fixed to report the actual sequence count. In the interactive application there was no warning given if you chose to save a report and opted to overwrite an existing report. You will now be warned in this case an offered the chance to use a different filename. This change won't affect the non-interactive mode of the program where report files will be overwritten if the program is run more than once on the same set of data. RELEASE NOTES FOR FastQC V0.4.2 ------------------------------- FastQC v0.4.2 is a minor release which fixes some bugs and improves the warnings on some of the analysis modules. Bugs which were fixed were: * The per-base quality plot showed an incorrect scale on the y-axis. This was usually off by about 2, but could be more depending on the data. The relative relationships shown were correct, it was just the scale bar which was wrong. * The sequence parser incorrectly identified some base called files as colorspace files where they contained dots in place of N base calls. This has now been improved but will still fail for the base where a base called file starts with an entry which is a single called base followed by all dots since this is indistinguishable from a colorspace fastq file. * Some JREs (notably OpenJDK) can't cope with a headless environment being set from within the program. I've therefore added code to the fastqc wrapper script to externally set the headless environment up to bypass this problem. Other improvements which have been made are: * When writing out graphs for the HTML report we now scale some graphs by the length of the sequences analysed so we don't get really squashed graphs. The interactive application will still scale the graphs to the size of the window * More checks have been added to the parsing of FastQ files to ensure we're looking at the correct file format. A better reporting mechanism has been added to allow the program to cope better with problems during parsing. * The per-sequence GC plot has been modified to add in a modelled normal distribtion over the observed distribution so you can see how well the two fit. * All modules (apart from the general stats) now have valid checks in place, and all can now produce warnings and failures. Some of the checks in the existing modules have been changed to better cope with libraries with very low or high GC content. RELEASE NOTES FOR FastQC V0.4.1 ------------------------------- FastQC v0.4.1 is a bugfix release which changes the operation of the duplicate sequence and overrepresented sequence modules. Both of these modules now only track sequences which appear in the first 200,000 sequences of a file. This change was made because people using longer read lengths found that tracking the first million sequences led to the program exhausting its allocated memory. The other change is that the duplicate sequence module now tracks sequence counts to the end of the file rather than stopping after a million sequences. This means the final duplication counts seen are much more realistic and should match with what you would see in a genome browser. Because of this change the cutoffs to flag a file with a warning or an error have been increased. You now get a warning when the sum of duplicated sequences is more than 20% of the unique sequences. You get an error when there are more duplicated sequences than unique sequences. RELEASE NOTES FOR FastQC V0.4 ----------------------------- FastQC v0.4 introduces a new analysis module, and easier way to launch the program from the command line and a new output file, as well as fixing a few minor bugs. The new analysis module is the sequence duplication level module. This is a complement to the existing overrepresented sequences module in that it looks at sequences which occur more than once in your data. The new module takes a more global view and says what proportion of all of your sequences occur once, twice, three times etc. In a diverse library most sequences should occur only once. A highly enriched library may have some duplication, but higher levels of duplication may indicate a problem, such as a PCR overamplification. In response to several requests we've also now introduced a new output file into the report. This is a text based, tab delimited file which includes all of the data show in the graphs in the graphical report. This would allow people running pipelines to store the data generated by fastQC and analyse it systematically rather than just taking the pass/fail/warn summary, or reviewing the reports manually. Finally, if you're running fastqc from the command line we've now included a 'fastqc' wrapper script which you can launch directly rather than having to construct a java launch command. You can still pass -Dxxx options through to the program, but for simple analyses you can now simply run: fastqc [some files] ..once you have included the FastQC install directory into your path. More details are in the install document. Other minor changes: - The over-represented sequences module now scans the first million sequences to decide which sequences to track to the end of the file. - The labeling on the per-base N content graph is now correct RELEASE NOTES FOR FastQC V0.3.1 ------------------------------- V0.3.1 is a bugfix release which fixes a few minor problems. 1) The template system now correctly checks that it only imports graphics files from the templates directory into the report files and doesn't break when it encounters unexpected files. 2) The offline mode now correctly reports the progress of all processed files rather than just the first one. 3) The documentation has been updated to include information on the blue mean line in the per base quality plot. RELEASE NOTES FOR FastQC V0.3 ----------------------------- Major new additions to v0.3 are listed below: 1) Support for gzip compressed fastq files. You can now load gzip compressed fastq files into FastQC in the same way as uncompressed files. The files will be decompressed interactively and can be viewed in the same way as for uncompressed files. 2) Contaminant identification. If your library is found to have overrepresented sequences in it these are now scanned against a database of common contaminants (primers, adapters etc) to see if the source of the contamination can be identified. The database is stored in a new Contaminants folder in the main installation directory, and can be updated with your own protocol specific sequences. 3) When in non-interactive mode you can now pass a preference -Dfastqc.output_dir to provide an alternative location to save reports to, rather than having them in the same directory as the source fastq files. Some improvements have also been made to the colorspace support so this version should support a wider range of colorspace fastq files. RELEASE NOTES FOR FastQC V0.2 ----------------------------- There are a few new additions in v0.2 of FastQC 1) Colorspace support: We now have rudimentary support for the analysis of fastq files in colorspace. The analysis is done by converting the colorspace calls to basecalls, which isn't ideal but is hopefully more useful than nothing. 2) Option to unzip reports. The default action in non-interactive mode is now to both create a zip file containing the FastQC report and to unzip this into a folder of the same name. If you just want to generate the zip files you can add -Dfastqc.unzip=false to the command line to suppress this new behaviour 3) It is now possible to customise the HTML report for your site. There is an HTML template which can be edited to add your own branding to the reports you generate. 4) In addition to the human readable HTML report we now also generate a tab delimited summary file which should make it easier to integrate FastQC into an automated reporting system which spots any potential problems with the data. RELEASE NOTES FOR FastQC V0.1.1 ------------------------------- This point release fixes a problem when running FastQC in a non-interactive mode on a system without a graphical display. The program should now operate correctly on headless systems as long as the filename(s) to process are specified on the command line. RELEASE NOTES FOR FastQC V0.1 ------------------------------- FastQC v0.1 is a beta release it should work in its present state but we are keen to get feedback on the program. In particular we are interested to hear if anyone has: 1) Suggestions for other checks we could be performing. 2) Comments about the criteria we set for issuing warnings or errors and suggestions for how these could be improved. You can report feedback either though our bug reporting tool at: www.bioinformatics.bbsrc.ac.uk/bugzilla/ ...or directly to simon.andrews@bbsrc.ac.uk