"""Supporting definitions for the Python regression tests.""" if __name__ != 'test.test_support': raise ImportError('test_support must be imported from the test package') import contextlib import errno import functools import gc import socket import sys import os import platform import shutil import warnings import unittest import importlib import UserDict import re import time import struct import _testcapi import sysconfig try: import thread except ImportError: thread = None __all__ = ["Error", "TestFailed", "ResourceDenied", "import_module", "verbose", "use_resources", "max_memuse", "record_original_stdout", "get_original_stdout", "unload", "unlink", "rmtree", "forget", "is_resource_enabled", "requires", "find_unused_port", "bind_port", "fcmp", "have_unicode", "is_jython", "TESTFN", "HOST", "FUZZ", "SAVEDCWD", "temp_cwd", "findfile", "sortdict", "check_syntax_error", "open_urlresource", "check_warnings", "check_py3k_warnings", "CleanImport", "EnvironmentVarGuard", "captured_output", "captured_stdout", "TransientResource", "transient_internet", "run_with_locale", "set_memlimit", "bigmemtest", "bigaddrspacetest", "BasicTestRunner", "run_unittest", "run_doctest", "threading_setup", "threading_cleanup", "reap_children", "cpython_only", "check_impl_detail", "get_attribute", "py3k_bytes", "import_fresh_module", "threading_cleanup", "reap_children", "strip_python_stderr"] class Error(Exception): """Base class for regression test exceptions.""" class TestFailed(Error): """Test failed.""" class ResourceDenied(unittest.SkipTest): """Test skipped because it requested a disallowed resource. This is raised when a test calls requires() for a resource that has not been enabled. It is used to distinguish between expected and unexpected skips. """ @contextlib.contextmanager def _ignore_deprecated_imports(ignore=True): """Context manager to suppress package and module deprecation warnings when importing them. If ignore is False, this context manager has no effect.""" if ignore: with warnings.catch_warnings(): warnings.filterwarnings("ignore", ".+ (module|package)", DeprecationWarning) yield else: yield def import_module(name, deprecated=False): """Import and return the module to be tested, raising SkipTest if it is not available. If deprecated is True, any module or package deprecation messages will be suppressed.""" with _ignore_deprecated_imports(deprecated): try: return importlib.import_module(name) except ImportError, msg: raise unittest.SkipTest(str(msg)) def _save_and_remove_module(name, orig_modules): """Helper function to save and remove a module from sys.modules Raise ImportError if the module can't be imported.""" # try to import the module and raise an error if it can't be imported if name not in sys.modules: __import__(name) del sys.modules[name] for modname in list(sys.modules): if modname == name or modname.startswith(name + '.'): orig_modules[modname] = sys.modules[modname] del sys.modules[modname] def _save_and_block_module(name, orig_modules): """Helper function to save and block a module in sys.modules Return True if the module was in sys.modules, False otherwise.""" saved = True try: orig_modules[name] = sys.modules[name] except KeyError: saved = False sys.modules[name] = None return saved def import_fresh_module(name, fresh=(), blocked=(), deprecated=False): """Imports and returns a module, deliberately bypassing the sys.modules cache and importing a fresh copy of the module. Once the import is complete, the sys.modules cache is restored to its original state. Modules named in fresh are also imported anew if needed by the import. If one of these modules can't be imported, None is returned. Importing of modules named in blocked is prevented while the fresh import takes place. If deprecated is True, any module or package deprecation messages will be suppressed.""" # NOTE: test_heapq, test_json, and test_warnings include extra sanity # checks to make sure that this utility function is working as expected with _ignore_deprecated_imports(deprecated): # Keep track of modules saved for later restoration as well # as those which just need a blocking entry removed orig_modules = {} names_to_remove = [] _save_and_remove_module(name, orig_modules) try: for fresh_name in fresh: _save_and_remove_module(fresh_name, orig_modules) for blocked_name in blocked: if not _save_and_block_module(blocked_name, orig_modules): names_to_remove.append(blocked_name) fresh_module = importlib.import_module(name) except ImportError: fresh_module = None finally: for orig_name, module in orig_modules.items(): sys.modules[orig_name] = module for name_to_remove in names_to_remove: del sys.modules[name_to_remove] return fresh_module def get_attribute(obj, name): """Get an attribute, raising SkipTest if AttributeError is raised.""" try: attribute = getattr(obj, name) except AttributeError: raise unittest.SkipTest("module %s has no attribute %s" % ( obj.__name__, name)) else: return attribute verbose = 1 # Flag set to 0 by regrtest.py use_resources = None # Flag set to [] by regrtest.py max_memuse = 0 # Disable bigmem tests (they will still be run with # small sizes, to make sure they work.) real_max_memuse = 0 # _original_stdout is meant to hold stdout at the time regrtest began. # This may be "the real" stdout, or IDLE's emulation of stdout, or whatever. # The point is to have some flavor of stdout the user can actually see. _original_stdout = None def record_original_stdout(stdout): global _original_stdout _original_stdout = stdout def get_original_stdout(): return _original_stdout or sys.stdout def unload(name): try: del sys.modules[name] except KeyError: pass if sys.platform.startswith("win"): def _waitfor(func, pathname, waitall=False): # Peform the operation func(pathname) # Now setup the wait loop if waitall: dirname = pathname else: dirname, name = os.path.split(pathname) dirname = dirname or '.' # Check for `pathname` to be removed from the filesystem. # The exponential backoff of the timeout amounts to a total # of ~1 second after which the deletion is probably an error # anyway. # Testing on a i7@4.3GHz shows that usually only 1 iteration is # required when contention occurs. timeout = 0.001 while timeout < 1.0: # Note we are only testing for the existance of the file(s) in # the contents of the directory regardless of any security or # access rights. If we have made it this far, we have sufficient # permissions to do that much using Python's equivalent of the # Windows API FindFirstFile. # Other Windows APIs can fail or give incorrect results when # dealing with files that are pending deletion. L = os.listdir(dirname) if not (L if waitall else name in L): return # Increase the timeout and try again time.sleep(timeout) timeout *= 2 warnings.warn('tests may fail, delete still pending for ' + pathname, RuntimeWarning, stacklevel=4) def _unlink(filename): _waitfor(os.unlink, filename) def _rmdir(dirname): _waitfor(os.rmdir, dirname) def _rmtree(path): def _rmtree_inner(path): for name in os.listdir(path): fullname = os.path.join(path, name) if os.path.isdir(fullname): _waitfor(_rmtree_inner, fullname, waitall=True) os.rmdir(fullname) else: os.unlink(fullname) _waitfor(_rmtree_inner, path, waitall=True) _waitfor(os.rmdir, path) else: _unlink = os.unlink _rmdir = os.rmdir _rmtree = shutil.rmtree def unlink(filename): try: _unlink(filename) except OSError: pass def rmdir(dirname): try: _rmdir(dirname) except OSError as error: # The directory need not exist. if error.errno != errno.ENOENT: raise def rmtree(path): try: _rmtree(path) except OSError, e: # Unix returns ENOENT, Windows returns ESRCH. if e.errno not in (errno.ENOENT, errno.ESRCH): raise def forget(modname): '''"Forget" a module was ever imported by removing it from sys.modules and deleting any .pyc and .pyo files.''' unload(modname) for dirname in sys.path: unlink(os.path.join(dirname, modname + os.extsep + 'pyc')) # Deleting the .pyo file cannot be within the 'try' for the .pyc since # the chance exists that there is no .pyc (and thus the 'try' statement # is exited) but there is a .pyo file. unlink(os.path.join(dirname, modname + os.extsep + 'pyo')) def is_resource_enabled(resource): """Test whether a resource is enabled. Known resources are set by regrtest.py.""" return use_resources is not None and resource in use_resources def requires(resource, msg=None): """Raise ResourceDenied if the specified resource is not available. If the caller's module is __main__ then automatically return True. The possibility of False being returned occurs when regrtest.py is executing.""" # see if the caller's module is __main__ - if so, treat as if # the resource was set if sys._getframe(1).f_globals.get("__name__") == "__main__": return if not is_resource_enabled(resource): if msg is None: msg = "Use of the `%s' resource not enabled" % resource raise ResourceDenied(msg) HOST = 'localhost' def find_unused_port(family=socket.AF_INET, socktype=socket.SOCK_STREAM): """Returns an unused port that should be suitable for binding. This is achieved by creating a temporary socket with the same family and type as the 'sock' parameter (default is AF_INET, SOCK_STREAM), and binding it to the specified host address (defaults to 0.0.0.0) with the port set to 0, eliciting an unused ephemeral port from the OS. The temporary socket is then closed and deleted, and the ephemeral port is returned. Either this method or bind_port() should be used for any tests where a server socket needs to be bound to a particular port for the duration of the test. Which one to use depends on whether the calling code is creating a python socket, or if an unused port needs to be provided in a constructor or passed to an external program (i.e. the -accept argument to openssl's s_server mode). Always prefer bind_port() over find_unused_port() where possible. Hard coded ports should *NEVER* be used. As soon as a server socket is bound to a hard coded port, the ability to run multiple instances of the test simultaneously on the same host is compromised, which makes the test a ticking time bomb in a buildbot environment. On Unix buildbots, this may simply manifest as a failed test, which can be recovered from without intervention in most cases, but on Windows, the entire python process can completely and utterly wedge, requiring someone to log in to the buildbot and manually kill the affected process. (This is easy to reproduce on Windows, unfortunately, and can be traced to the SO_REUSEADDR socket option having different semantics on Windows versus Unix/Linux. On Unix, you can't have two AF_INET SOCK_STREAM sockets bind, listen and then accept connections on identical host/ports. An EADDRINUSE socket.error will be raised at some point (depending on the platform and the order bind and listen were called on each socket). However, on Windows, if SO_REUSEADDR is set on the sockets, no EADDRINUSE will ever be raised when attempting to bind two identical host/ports. When accept() is called on each socket, the second caller's process will steal the port from the first caller, leaving them both in an awkwardly wedged state where they'll no longer respond to any signals or graceful kills, and must be forcibly killed via OpenProcess()/TerminateProcess(). The solution on Windows is to use the SO_EXCLUSIVEADDRUSE socket option instead of SO_REUSEADDR, which effectively affords the same semantics as SO_REUSEADDR on Unix. Given the propensity of Unix developers in the Open Source world compared to Windows ones, this is a common mistake. A quick look over OpenSSL's 0.9.8g source shows that they use SO_REUSEADDR when openssl.exe is called with the 's_server' option, for example. See http://bugs.python.org/issue2550 for more info. The following site also has a very thorough description about the implications of both REUSEADDR and EXCLUSIVEADDRUSE on Windows: http://msdn2.microsoft.com/en-us/library/ms740621(VS.85).aspx) XXX: although this approach is a vast improvement on previous attempts to elicit unused ports, it rests heavily on the assumption that the ephemeral port returned to us by the OS won't immediately be dished back out to some other process when we close and delete our temporary socket but before our calling code has a chance to bind the returned port. We can deal with this issue if/when we come across it.""" tempsock = socket.socket(family, socktype) port = bind_port(tempsock) tempsock.close() del tempsock return port def bind_port(sock, host=HOST): """Bind the socket to a free port and return the port number. Relies on ephemeral ports in order to ensure we are using an unbound port. This is important as many tests may be running simultaneously, especially in a buildbot environment. This method raises an exception if the sock.family is AF_INET and sock.type is SOCK_STREAM, *and* the socket has SO_REUSEADDR or SO_REUSEPORT set on it. Tests should *never* set these socket options for TCP/IP sockets. The only case for setting these options is testing multicasting via multiple UDP sockets. Additionally, if the SO_EXCLUSIVEADDRUSE socket option is available (i.e. on Windows), it will be set on the socket. This will prevent anyone else from bind()'ing to our host/port for the duration of the test. """ if sock.family == socket.AF_INET and sock.type == socket.SOCK_STREAM: if hasattr(socket, 'SO_REUSEADDR'): if sock.getsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR) == 1: raise TestFailed("tests should never set the SO_REUSEADDR " \ "socket option on TCP/IP sockets!") if hasattr(socket, 'SO_REUSEPORT'): if sock.getsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT) == 1: raise TestFailed("tests should never set the SO_REUSEPORT " \ "socket option on TCP/IP sockets!") if hasattr(socket, 'SO_EXCLUSIVEADDRUSE'): sock.setsockopt(socket.SOL_SOCKET, socket.SO_EXCLUSIVEADDRUSE, 1) sock.bind((host, 0)) port = sock.getsockname()[1] return port FUZZ = 1e-6 def fcmp(x, y): # fuzzy comparison function if isinstance(x, float) or isinstance(y, float): try: fuzz = (abs(x) + abs(y)) * FUZZ if abs(x-y) <= fuzz: return 0 except: pass elif type(x) == type(y) and isinstance(x, (tuple, list)): for i in range(min(len(x), len(y))): outcome = fcmp(x[i], y[i]) if outcome != 0: return outcome return (len(x) > len(y)) - (len(x) < len(y)) return (x > y) - (x < y) # A constant likely larger than the underlying OS pipe buffer size, to # make writes blocking. # Windows limit seems to be around 512 B, and many Unix kernels have a # 64 KiB pipe buffer size or 16 * PAGE_SIZE: take a few megs to be sure. # (see issue #17835 for a discussion of this number). PIPE_MAX_SIZE = 4 *1024 * 1024 + 1 try: unicode have_unicode = True except NameError: have_unicode = False is_jython = sys.platform.startswith('java') # Filename used for testing if os.name == 'java': # Jython disallows @ in module names TESTFN = '$test' elif os.name == 'riscos': TESTFN = 'testfile' else: TESTFN = '@test' # Unicode name only used if TEST_FN_ENCODING exists for the platform. if have_unicode: # Assuming sys.getfilesystemencoding()!=sys.getdefaultencoding() # TESTFN_UNICODE is a filename that can be encoded using the # file system encoding, but *not* with the default (ascii) encoding if isinstance('', unicode): # python -U # XXX perhaps unicode() should accept Unicode strings? TESTFN_UNICODE = "@test-\xe0\xf2" else: # 2 latin characters. TESTFN_UNICODE = unicode("@test-\xe0\xf2", "latin-1") TESTFN_ENCODING = sys.getfilesystemencoding() # TESTFN_UNENCODABLE is a filename that should *not* be # able to be encoded by *either* the default or filesystem encoding. # This test really only makes sense on Windows NT platforms # which have special Unicode support in posixmodule. if (not hasattr(sys, "getwindowsversion") or sys.getwindowsversion()[3] < 2): # 0=win32s or 1=9x/ME TESTFN_UNENCODABLE = None else: # Japanese characters (I think - from bug 846133) TESTFN_UNENCODABLE = eval('u"@test-\u5171\u6709\u3055\u308c\u308b"') try: # XXX - Note - should be using TESTFN_ENCODING here - but for # Windows, "mbcs" currently always operates as if in # errors=ignore' mode - hence we get '?' characters rather than # the exception. 'Latin1' operates as we expect - ie, fails. # See [ 850997 ] mbcs encoding ignores errors TESTFN_UNENCODABLE.encode("Latin1") except UnicodeEncodeError: pass else: print \ 'WARNING: The filename %r CAN be encoded by the filesystem. ' \ 'Unicode filename tests may not be effective' \ % TESTFN_UNENCODABLE # Disambiguate TESTFN for parallel testing, while letting it remain a valid # module name. TESTFN = "{}_{}_tmp".format(TESTFN, os.getpid()) # Save the initial cwd SAVEDCWD = os.getcwd() @contextlib.contextmanager def temp_cwd(name='tempcwd', quiet=False): """ Context manager that creates a temporary directory and set it as CWD. The new CWD is created in the current directory and it's named *name*. If *quiet* is False (default) and it's not possible to create or change the CWD, an error is raised. If it's True, only a warning is raised and the original CWD is used. """ if have_unicode and isinstance(name, unicode): try: name = name.encode(sys.getfilesystemencoding() or 'ascii') except UnicodeEncodeError: if not quiet: raise unittest.SkipTest('unable to encode the cwd name with ' 'the filesystem encoding.') saved_dir = os.getcwd() is_temporary = False try: os.mkdir(name) os.chdir(name) is_temporary = True except OSError: if not quiet: raise warnings.warn('tests may fail, unable to change the CWD to ' + name, RuntimeWarning, stacklevel=3) try: yield os.getcwd() finally: os.chdir(saved_dir) if is_temporary: rmtree(name) def findfile(file, here=__file__, subdir=None): """Try to find a file on sys.path and the working directory. If it is not found the argument passed to the function is returned (this does not necessarily signal failure; could still be the legitimate path).""" if os.path.isabs(file): return file if subdir is not None: file = os.path.join(subdir, file) path = sys.path path = [os.path.dirname(here)] + path for dn in path: fn = os.path.join(dn, file) if os.path.exists(fn): return fn return file def sortdict(dict): "Like repr(dict), but in sorted order." items = dict.items() items.sort() reprpairs = ["%r: %r" % pair for pair in items] withcommas = ", ".join(reprpairs) return "{%s}" % withcommas def make_bad_fd(): """ Create an invalid file descriptor by opening and closing a file and return its fd. """ file = open(TESTFN, "wb") try: return file.fileno() finally: file.close() unlink(TESTFN) def check_syntax_error(testcase, statement): testcase.assertRaises(SyntaxError, compile, statement, '', 'exec') def open_urlresource(url, check=None): import urlparse, urllib2 filename = urlparse.urlparse(url)[2].split('/')[-1] # '/': it's URL! fn = os.path.join(os.path.dirname(__file__), "data", filename) def check_valid_file(fn): f = open(fn) if check is None: return f elif check(f): f.seek(0) return f f.close() if os.path.exists(fn): f = check_valid_file(fn) if f is not None: return f unlink(fn) # Verify the requirement before downloading the file requires('urlfetch') print >> get_original_stdout(), '\tfetching %s ...' % url f = urllib2.urlopen(url, timeout=15) try: with open(fn, "wb") as out: s = f.read() while s: out.write(s) s = f.read() finally: f.close() f = check_valid_file(fn) if f is not None: return f raise TestFailed('invalid resource "%s"' % fn) class WarningsRecorder(object): """Convenience wrapper for the warnings list returned on entry to the warnings.catch_warnings() context manager. """ def __init__(self, warnings_list): self._warnings = warnings_list self._last = 0 def __getattr__(self, attr): if len(self._warnings) > self._last: return getattr(self._warnings[-1], attr) elif attr in warnings.WarningMessage._WARNING_DETAILS: return None raise AttributeError("%r has no attribute %r" % (self, attr)) @property def warnings(self): return self._warnings[self._last:] def reset(self): self._last = len(self._warnings) def _filterwarnings(filters, quiet=False): """Catch the warnings, then check if all the expected warnings have been raised and re-raise unexpected warnings. If 'quiet' is True, only re-raise the unexpected warnings. """ # Clear the warning registry of the calling module # in order to re-raise the warnings. frame = sys._getframe(2) registry = frame.f_globals.get('__warningregistry__') if registry: registry.clear() with warnings.catch_warnings(record=True) as w: # Set filter "always" to record all warnings. Because # test_warnings swap the module, we need to look up in # the sys.modules dictionary. sys.modules['warnings'].simplefilter("always") yield WarningsRecorder(w) # Filter the recorded warnings reraise = [warning.message for warning in w] missing = [] for msg, cat in filters: seen = False for exc in reraise[:]: message = str(exc) # Filter out the matching messages if (re.match(msg, message, re.I) and issubclass(exc.__class__, cat)): seen = True reraise.remove(exc) if not seen and not quiet: # This filter caught nothing missing.append((msg, cat.__name__)) if reraise: raise AssertionError("unhandled warning %r" % reraise[0]) if missing: raise AssertionError("filter (%r, %s) did not catch any warning" % missing[0]) @contextlib.contextmanager def check_warnings(*filters, **kwargs): """Context manager to silence warnings. Accept 2-tuples as positional arguments: ("message regexp", WarningCategory) Optional argument: - if 'quiet' is True, it does not fail if a filter catches nothing (default True without argument, default False if some filters are defined) Without argument, it defaults to: check_warnings(("", Warning), quiet=True) """ quiet = kwargs.get('quiet') if not filters: filters = (("", Warning),) # Preserve backward compatibility if quiet is None: quiet = True return _filterwarnings(filters, quiet) @contextlib.contextmanager def check_py3k_warnings(*filters, **kwargs): """Context manager to silence py3k warnings. Accept 2-tuples as positional arguments: ("message regexp", WarningCategory) Optional argument: - if 'quiet' is True, it does not fail if a filter catches nothing (default False) Without argument, it defaults to: check_py3k_warnings(("", DeprecationWarning), quiet=False) """ if sys.py3kwarning: if not filters: filters = (("", DeprecationWarning),) else: # It should not raise any py3k warning filters = () return _filterwarnings(filters, kwargs.get('quiet')) class CleanImport(object): """Context manager to force import to return a new module reference. This is useful for testing module-level behaviours, such as the emission of a DeprecationWarning on import. Use like this: with CleanImport("foo"): importlib.import_module("foo") # new reference """ def __init__(self, *module_names): self.original_modules = sys.modules.copy() for module_name in module_names: if module_name in sys.modules: module = sys.modules[module_name] # It is possible that module_name is just an alias for # another module (e.g. stub for modules renamed in 3.x). # In that case, we also need delete the real module to clear # the import cache. if module.__name__ != module_name: del sys.modules[module.__name__] del sys.modules[module_name] def __enter__(self): return self def __exit__(self, *ignore_exc): sys.modules.update(self.original_modules) class EnvironmentVarGuard(UserDict.DictMixin): """Class to help protect the environment variable properly. Can be used as a context manager.""" def __init__(self): self._environ = os.environ self._changed = {} def __getitem__(self, envvar): return self._environ[envvar] def __setitem__(self, envvar, value): # Remember the initial value on the first access if envvar not in self._changed: self._changed[envvar] = self._environ.get(envvar) self._environ[envvar] = value def __delitem__(self, envvar): # Remember the initial value on the first access if envvar not in self._changed: self._changed[envvar] = self._environ.get(envvar) if envvar in self._environ: del self._environ[envvar] def keys(self): return self._environ.keys() def set(self, envvar, value): self[envvar] = value def unset(self, envvar): del self[envvar] def __enter__(self): return self def __exit__(self, *ignore_exc): for (k, v) in self._changed.items(): if v is None: if k in self._environ: del self._environ[k] else: self._environ[k] = v os.environ = self._environ class DirsOnSysPath(object): """Context manager to temporarily add directories to sys.path. This makes a copy of sys.path, appends any directories given as positional arguments, then reverts sys.path to the copied settings when the context ends. Note that *all* sys.path modifications in the body of the context manager, including replacement of the object, will be reverted at the end of the block. """ def __init__(self, *paths): self.original_value = sys.path[:] self.original_object = sys.path sys.path.extend(paths) def __enter__(self): return self def __exit__(self, *ignore_exc): sys.path = self.original_object sys.path[:] = self.original_value class TransientResource(object): """Raise ResourceDenied if an exception is raised while the context manager is in effect that matches the specified exception and attributes.""" def __init__(self, exc, **kwargs): self.exc = exc self.attrs = kwargs def __enter__(self): return self def __exit__(self, type_=None, value=None, traceback=None): """If type_ is a subclass of self.exc and value has attributes matching self.attrs, raise ResourceDenied. Otherwise let the exception propagate (if any).""" if type_ is not None and issubclass(self.exc, type_): for attr, attr_value in self.attrs.iteritems(): if not hasattr(value, attr): break if getattr(value, attr) != attr_value: break else: raise ResourceDenied("an optional resource is not available") @contextlib.contextmanager def transient_internet(resource_name, timeout=30.0, errnos=()): """Return a context manager that raises ResourceDenied when various issues with the Internet connection manifest themselves as exceptions.""" default_errnos = [ ('ECONNREFUSED', 111), ('ECONNRESET', 104), ('EHOSTUNREACH', 113), ('ENETUNREACH', 101), ('ETIMEDOUT', 110), ] default_gai_errnos = [ ('EAI_AGAIN', -3), ('EAI_FAIL', -4), ('EAI_NONAME', -2), ('EAI_NODATA', -5), # Windows defines EAI_NODATA as 11001 but idiotic getaddrinfo() # implementation actually returns WSANO_DATA i.e. 11004. ('WSANO_DATA', 11004), ] denied = ResourceDenied("Resource '%s' is not available" % resource_name) captured_errnos = errnos gai_errnos = [] if not captured_errnos: captured_errnos = [getattr(errno, name, num) for (name, num) in default_errnos] gai_errnos = [getattr(socket, name, num) for (name, num) in default_gai_errnos] def filter_error(err): n = getattr(err, 'errno', None) if (isinstance(err, socket.timeout) or (isinstance(err, socket.gaierror) and n in gai_errnos) or n in captured_errnos): if not verbose: sys.stderr.write(denied.args[0] + "\n") raise denied old_timeout = socket.getdefaulttimeout() try: if timeout is not None: socket.setdefaulttimeout(timeout) yield except IOError as err: # urllib can wrap original socket errors multiple times (!), we must # unwrap to get at the original error. while True: a = err.args if len(a) >= 1 and isinstance(a[0], IOError): err = a[0] # The error can also be wrapped as args[1]: # except socket.error as msg: # raise IOError('socket error', msg).with_traceback(sys.exc_info()[2]) elif len(a) >= 2 and isinstance(a[1], IOError): err = a[1] else: break filter_error(err) raise # XXX should we catch generic exceptions and look for their # __cause__ or __context__? finally: socket.setdefaulttimeout(old_timeout) @contextlib.contextmanager def captured_output(stream_name): """Return a context manager used by captured_stdout and captured_stdin that temporarily replaces the sys stream *stream_name* with a StringIO.""" import StringIO orig_stdout = getattr(sys, stream_name) setattr(sys, stream_name, StringIO.StringIO()) try: yield getattr(sys, stream_name) finally: setattr(sys, stream_name, orig_stdout) def captured_stdout(): """Capture the output of sys.stdout: with captured_stdout() as s: print "hello" self.assertEqual(s.getvalue(), "hello") """ return captured_output("stdout") def captured_stderr(): return captured_output("stderr") def captured_stdin(): return captured_output("stdin") def gc_collect(): """Force as many objects as possible to be collected. In non-CPython implementations of Python, this is needed because timely deallocation is not guaranteed by the garbage collector. (Even in CPython this can be the case in case of reference cycles.) This means that __del__ methods may be called later than expected and weakrefs may remain alive for longer than expected. This function tries its best to force all garbage objects to disappear. """ gc.collect() if is_jython: time.sleep(0.1) gc.collect() gc.collect() _header = '2P' if hasattr(sys, "gettotalrefcount"): _header = '2P' + _header _vheader = _header + 'P' def calcobjsize(fmt): return struct.calcsize(_header + fmt + '0P') def calcvobjsize(fmt): return struct.calcsize(_vheader + fmt + '0P') _TPFLAGS_HAVE_GC = 1<<14 _TPFLAGS_HEAPTYPE = 1<<9 def check_sizeof(test, o, size): result = sys.getsizeof(o) # add GC header size if ((type(o) == type) and (o.__flags__ & _TPFLAGS_HEAPTYPE) or\ ((type(o) != type) and (type(o).__flags__ & _TPFLAGS_HAVE_GC))): size += _testcapi.SIZEOF_PYGC_HEAD msg = 'wrong size for %s: got %d, expected %d' \ % (type(o), result, size) test.assertEqual(result, size, msg) #======================================================================= # Decorator for running a function in a different locale, correctly resetting # it afterwards. def run_with_locale(catstr, *locales): def decorator(func): def inner(*args, **kwds): try: import locale category = getattr(locale, catstr) orig_locale = locale.setlocale(category) except AttributeError: # if the test author gives us an invalid category string raise except: # cannot retrieve original locale, so do nothing locale = orig_locale = None else: for loc in locales: try: locale.setlocale(category, loc) break except: pass # now run the function, resetting the locale on exceptions try: return func(*args, **kwds) finally: if locale and orig_locale: locale.setlocale(category, orig_locale) inner.func_name = func.func_name inner.__doc__ = func.__doc__ return inner return decorator #======================================================================= # Big-memory-test support. Separate from 'resources' because memory use should be configurable. # Some handy shorthands. Note that these are used for byte-limits as well # as size-limits, in the various bigmem tests _1M = 1024*1024 _1G = 1024 * _1M _2G = 2 * _1G _4G = 4 * _1G MAX_Py_ssize_t = sys.maxsize def set_memlimit(limit): global max_memuse global real_max_memuse sizes = { 'k': 1024, 'm': _1M, 'g': _1G, 't': 1024*_1G, } m = re.match(r'(\d+(\.\d+)?) (K|M|G|T)b?$', limit, re.IGNORECASE | re.VERBOSE) if m is None: raise ValueError('Invalid memory limit %r' % (limit,)) memlimit = int(float(m.group(1)) * sizes[m.group(3).lower()]) real_max_memuse = memlimit if memlimit > MAX_Py_ssize_t: memlimit = MAX_Py_ssize_t if memlimit < _2G - 1: raise ValueError('Memory limit %r too low to be useful' % (limit,)) max_memuse = memlimit def bigmemtest(minsize, memuse, overhead=5*_1M): """Decorator for bigmem tests. 'minsize' is the minimum useful size for the test (in arbitrary, test-interpreted units.) 'memuse' is the number of 'bytes per size' for the test, or a good estimate of it. 'overhead' specifies fixed overhead, independent of the testsize, and defaults to 5Mb. The decorator tries to guess a good value for 'size' and passes it to the decorated test function. If minsize * memuse is more than the allowed memory use (as defined by max_memuse), the test is skipped. Otherwise, minsize is adjusted upward to use up to max_memuse. """ def decorator(f): def wrapper(self): if not max_memuse: # If max_memuse is 0 (the default), # we still want to run the tests with size set to a few kb, # to make sure they work. We still want to avoid using # too much memory, though, but we do that noisily. maxsize = 5147 self.assertFalse(maxsize * memuse + overhead > 20 * _1M) else: maxsize = int((max_memuse - overhead) / memuse) if maxsize < minsize: # Really ought to print 'test skipped' or something if verbose: sys.stderr.write("Skipping %s because of memory " "constraint\n" % (f.__name__,)) return # Try to keep some breathing room in memory use maxsize = max(maxsize - 50 * _1M, minsize) return f(self, maxsize) wrapper.minsize = minsize wrapper.memuse = memuse wrapper.overhead = overhead return wrapper return decorator def precisionbigmemtest(size, memuse, overhead=5*_1M, dry_run=True): def decorator(f): def wrapper(self): if not real_max_memuse: maxsize = 5147 else: maxsize = size if ((real_max_memuse or not dry_run) and real_max_memuse < maxsize * memuse): if verbose: sys.stderr.write("Skipping %s because of memory " "constraint\n" % (f.__name__,)) return return f(self, maxsize) wrapper.size = size wrapper.memuse = memuse wrapper.overhead = overhead return wrapper return decorator def bigaddrspacetest(f): """Decorator for tests that fill the address space.""" def wrapper(self): if max_memuse < MAX_Py_ssize_t: if verbose: sys.stderr.write("Skipping %s because of memory " "constraint\n" % (f.__name__,)) else: return f(self) return wrapper #======================================================================= # unittest integration. class BasicTestRunner: def run(self, test): result = unittest.TestResult() test(result) return result def _id(obj): return obj def requires_resource(resource): if is_resource_enabled(resource): return _id else: return unittest.skip("resource {0!r} is not enabled".format(resource)) def cpython_only(test): """ Decorator for tests only applicable on CPython. """ return impl_detail(cpython=True)(test) def impl_detail(msg=None, **guards): if check_impl_detail(**guards): return _id if msg is None: guardnames, default = _parse_guards(guards) if default: msg = "implementation detail not available on {0}" else: msg = "implementation detail specific to {0}" guardnames = sorted(guardnames.keys()) msg = msg.format(' or '.join(guardnames)) return unittest.skip(msg) def _parse_guards(guards): # Returns a tuple ({platform_name: run_me}, default_value) if not guards: return ({'cpython': True}, False) is_true = guards.values()[0] assert guards.values() == [is_true] * len(guards) # all True or all False return (guards, not is_true) # Use the following check to guard CPython's implementation-specific tests -- # or to run them only on the implementation(s) guarded by the arguments. def check_impl_detail(**guards): """This function returns True or False depending on the host platform. Examples: if check_impl_detail(): # only on CPython (default) if check_impl_detail(jython=True): # only on Jython if check_impl_detail(cpython=False): # everywhere except on CPython """ guards, default = _parse_guards(guards) return guards.get(platform.python_implementation().lower(), default) def _run_suite(suite): """Run tests from a unittest.TestSuite-derived class.""" if verbose: runner = unittest.TextTestRunner(sys.stdout, verbosity=2) else: runner = BasicTestRunner() result = runner.run(suite) if not result.wasSuccessful(): if len(result.errors) == 1 and not result.failures: err = result.errors[0][1] elif len(result.failures) == 1 and not result.errors: err = result.failures[0][1] else: err = "multiple errors occurred" if not verbose: err += "; run in verbose mode for details" raise TestFailed(err) def run_unittest(*classes): """Run tests from unittest.TestCase-derived classes.""" valid_types = (unittest.TestSuite, unittest.TestCase) suite = unittest.TestSuite() for cls in classes: if isinstance(cls, str): if cls in sys.modules: suite.addTest(unittest.findTestCases(sys.modules[cls])) else: raise ValueError("str arguments must be keys in sys.modules") elif isinstance(cls, valid_types): suite.addTest(cls) else: suite.addTest(unittest.makeSuite(cls)) _run_suite(suite) #======================================================================= # Check for the presence of docstrings. HAVE_DOCSTRINGS = (check_impl_detail(cpython=False) or sys.platform == 'win32' or sysconfig.get_config_var('WITH_DOC_STRINGS')) requires_docstrings = unittest.skipUnless(HAVE_DOCSTRINGS, "test requires docstrings") #======================================================================= # doctest driver. def run_doctest(module, verbosity=None): """Run doctest on the given module. Return (#failures, #tests). If optional argument verbosity is not specified (or is None), pass test_support's belief about verbosity on to doctest. Else doctest's usual behavior is used (it searches sys.argv for -v). """ import doctest if verbosity is None: verbosity = verbose else: verbosity = None # Direct doctest output (normally just errors) to real stdout; doctest # output shouldn't be compared by regrtest. save_stdout = sys.stdout sys.stdout = get_original_stdout() try: f, t = doctest.testmod(module, verbose=verbosity) if f: raise TestFailed("%d of %d doctests failed" % (f, t)) finally: sys.stdout = save_stdout if verbose: print 'doctest (%s) ... %d tests with zero failures' % (module.__name__, t) return f, t #======================================================================= # Threading support to prevent reporting refleaks when running regrtest.py -R # NOTE: we use thread._count() rather than threading.enumerate() (or the # moral equivalent thereof) because a threading.Thread object is still alive # until its __bootstrap() method has returned, even after it has been # unregistered from the threading module. # thread._count(), on the other hand, only gets decremented *after* the # __bootstrap() method has returned, which gives us reliable reference counts # at the end of a test run. def threading_setup(): if thread: return thread._count(), else: return 1, def threading_cleanup(nb_threads): if not thread: return _MAX_COUNT = 10 for count in range(_MAX_COUNT): n = thread._count() if n == nb_threads: break time.sleep(0.1) # XXX print a warning in case of failure? def reap_threads(func): """Use this function when threads are being used. This will ensure that the threads are cleaned up even when the test fails. If threading is unavailable this function does nothing. """ if not thread: return func @functools.wraps(func) def decorator(*args): key = threading_setup() try: return func(*args) finally: threading_cleanup(*key) return decorator def reap_children(): """Use this function at the end of test_main() whenever sub-processes are started. This will help ensure that no extra children (zombies) stick around to hog resources and create problems when looking for refleaks. """ # Reap all our dead child processes so we don't leave zombies around. # These hog resources and might be causing some of the buildbots to die. if hasattr(os, 'waitpid'): any_process = -1 while True: try: # This will raise an exception on Windows. That's ok. pid, status = os.waitpid(any_process, os.WNOHANG) if pid == 0: break except: break @contextlib.contextmanager def swap_attr(obj, attr, new_val): """Temporary swap out an attribute with a new object. Usage: with swap_attr(obj, "attr", 5): ... This will set obj.attr to 5 for the duration of the with: block, restoring the old value at the end of the block. If `attr` doesn't exist on `obj`, it will be created and then deleted at the end of the block. """ if hasattr(obj, attr): real_val = getattr(obj, attr) setattr(obj, attr, new_val) try: yield finally: setattr(obj, attr, real_val) else: setattr(obj, attr, new_val) try: yield finally: delattr(obj, attr) def py3k_bytes(b): """Emulate the py3k bytes() constructor. NOTE: This is only a best effort function. """ try: # memoryview? return b.tobytes() except AttributeError: try: # iterable of ints? return b"".join(chr(x) for x in b) except TypeError: return bytes(b) def args_from_interpreter_flags(): """Return a list of command-line arguments reproducing the current settings in sys.flags.""" import subprocess return subprocess._args_from_interpreter_flags() def strip_python_stderr(stderr): """Strip the stderr of a Python process from potential debug output emitted by the interpreter. This will typically be run on the result of the communicate() method of a subprocess.Popen object. """ stderr = re.sub(br"\[\d+ refs\]\r?\n?$", b"", stderr).strip() return stderr