Release 0.7.15 (31 May 2016) ---------------------------- Fixed a long existing bug which potentially leads underestimated insert size upper bound. This bug should have little effect in practice. (0.7.15: 31 May 2016, r1140) Release 0.7.14 (4 May 2016) --------------------------- In the ALT mapping mode, this release adds the "AH:*" header tag to SQ lines corresponding to alternate haplotypes. (0.7.14: 4 May 2016, r1136) Release 0.7.13 (23 Feburary 2016) --------------------------------- This release fixes a few minor bugs in the previous version and adds a few minor features. All BWA algorithms should produce identical output to 0.7.12 when there are no ALT contigs. Detailed changes: * Fixed a bug in "bwa-postalt.js". The old version may produce 0.5% of wrong bases for reads mapped to the ALT contigs. * Fixed a potential bug in the multithreading mode. It may occur when mapping is much faster than file reading, which should almost never happen in practice. * Changed the download URL of GRCh38. * Removed the read overlap mode. It is not working well. * Added the ropebwt2 algorithm as an alternative to index large genomes. Ropebwt2 is slower than the "bwtsw" algorithm, but it has a permissive license. This allows us to create an Apache2-licensed BWA (in the "Apache2" branch) for commercial users who are concerned with GPL. (0.7.13: 23 Feburary 2016, r1126) Release 0.7.12 (28 December 2014) --------------------------------- This release fixed a bug in the pair-end mode when ALT contigs are present. It leads to undercalling in regions overlapping ALT contigs. (0.7.12: 28 December 2014, r1039) Release 0.7.11 (23 December, 2014) ---------------------------------- A major change to BWA-MEM is the support of mapping to ALT contigs in addition to the primary assembly. Part of the ALT mapping strategy is implemented in BWA-MEM and the rest in a postprocessing script for now. Due to the extra layer of complexity on generating the reference genome and on the two-step mapping, we start to provide a wrapper script and precompiled binaries since this release. The package may be more convenient to some specific use cases. For general uses, the single BWA binary still works like the old way. Another major addition to BWA-MEM is HLA typing, which made possible with the new ALT mapping strategy. Necessary data and programs are included in the binary release. The wrapper script also optionally performs HLA typing when HLA genes are included in the reference genome as additional ALT contigs. Other notable changes to BWA-MEM: * Added option `-b` to `bwa index`. This option tunes the batch size used in the construction of BWT. It is advised to use large `-b` for huge reference sequences such as the BLAST *nt* database. * Optimized for PacBio data. This includes a change to scoring based on a study done by Aaron Quinlan and a heuristic speedup. Further speedup is possible, but needs more careful investigation. * Dropped PacBio read-to-read alignment for now. BWA-MEM is good for finding the best hit, but is not very sensitive to suboptimal hits. Option `-x pbread` is still available, but hidden on the command line. This may be removed in future releases. * Added a new pre-setting for Oxford Nanopore 2D reads. LAST is still a little more sensitive on older bacterial data, but bwa-mem is as good on more recent data and is times faster for mapping against mammalian genomes. * Added LAST-like seeding. This improves the accuracy for longer reads. * Added option `-H` to insert arbitrary header lines. * Smarter option `-p`. Given an interleaved FASTQ stream, old bwa-mem identifies the 2i-th and (2i+1)-th reads as a read pair. The new verion identifies adjacent reads with the same read name as a read pair. It is possible to mix single-end and paired-end reads in one FASTQ. * Improved parallelization. Old bwa-mem waits for I/O. The new version puts I/O on a separate thread. It performs mapping while reading FASTQ and writing SAM. This saves significant wall-clock time when reading from or writing to a slow Unix pipe. With the new release, the recommended way to map Illumina reads to GRCh38 is to use the bwakit binary package: bwa.kit/run-gen-ref hs38DH bwa.kit/bwa index hs38DH.fa bwa.kit/run-bwamem -t8 -H -o out-prefix hs38DH.fa read1.fq.gz read2.fq.gz | sh Please check bwa.kit/README.md for details and command line options. (0.7.11: 23 December 2014, r1034) Release 0.7.10 (13 July, 2014) ------------------------------ Notable changes to BWA-MEM: * Fixed a segmentation fault due to an alignment bridging the forward-reverse boundary. This is a bug. * Use the PacBio heuristic to map contigs to the reference genome. The old heuristic evaluates the necessity of full extension for each chain. This may not work in long low-complexity regions. The PacBio heuristic performs SSE2-SW around each short seed. It works better. Note that the heuristic is only applied to long query sequences. For Illumina reads, the output is identical to the previous version. (0.7.10: 13 July 2014, r789) Release 0.7.9 (19 May, 2014) ---------------------------- This release brings several major changes to BWA-MEM. Notably, BWA-MEM now formally supports PacBio read-to-reference alignment and experimentally supports PacBio read-to-read alignment. BWA-MEM also runs faster at a minor cost of accuracy. The speedup is more significant when GRCh38 is in use. More specifically: * Support PacBio subread-to-reference alignment. Although older BWA-MEM works with PacBio data in principle, the resultant alignments are frequently fragmented. In this release, we fine tuned existing methods and introduced new heuristics to improve PacBio alignment. These changes are not used by default. Users need to add option "-x pacbio" to enable the feature. * Support PacBio subread-to-subread alignment (EXPERIMENTAL). This feature is enabled with option "-x pbread". In this mode, the output only gives the overlapping region between a pair of reads without detailed alignment. * Output alternative hits in the XA tag if there are not so many of them. This is a BWA-backtrack feature. * Support mapping to ALT contigs in GRCh38 (EXPERIMENTAL). We provide a script to postprocess hits in the XA tag to adjust the mapping quality and generate new primary alignments to all overlapping ALT contigs. We would *NOT* recommend this feature for production uses. * Improved alignments to many short reference sequences. Older BWA-MEM may generate an alignment bridging two or more adjacent reference sequences. Such alignments are split at a later step as postprocessing. This approach is complex and does not always work. This release forbids these alignments from the very beginning. BWA-MEM should not produce an alignment bridging two or more reference sequences any more. * Reduced the maximum seed occurrence from 10000 to 500. Reduced the maximum rounds of Smith-Waterman mate rescue from 100 to 50. Added a heuristic to lower the mapping quality if a read contains seeds with excessive occurrences. These changes make BWA-MEM faster at a minor cost of accuracy in highly repetitive regions. * Added an option "-Y" to use soft clipping for supplementary alignments. * Bugfix: incomplete alignment extension in corner cases. * Bugfix: integer overflow when aligning long query sequences. * Bugfix: chain score is not computed correctly (almost no practical effect) * General code cleanup * Added FAQs to README Changes in BWA-backtrack: * Bugfix: a segmentation fault when an alignment stands out of the end of the last chromosome. (0.7.9: 19 May 2014, r783) Release 0.7.8 (31 March, 2014) ------------------------------ Changes in BWA-MEM: * Bugfix: off-diagonal X-dropoff (option -d) not working as intended. Short-read alignment is not affected. * Bugfix: unnecessarily large bandwidth used during global alignment, which reduces the mapping speed by -5% for short reads. Results are not affected. * Bugfix: when the matching score is not one, paired-end mapping quality is inaccurate. * When the matching score (option -A) is changed, scale all score-related options accordingly unless overridden by users. * Allow to specify different gap open (or extension) penalties for deletions and insertions separately. * Allow to specify the insert size distribution. * Better and more detailed debugging information. With the default setting, 0.7.8 and 0.7.7 gave identical output on one million 100bp read pairs. (0.7.8: 31 March 2014, r455) Release 0.7.7 (25 Feburary, 2014) --------------------------------- This release fixes incorrect MD tags in the BWA-MEM output. A note about short-read mapping to GRCh38. The new human reference genome GRCh38 contains 60Mbp program generated alpha repeat arrays, some of which are hard masked as they cannot be localized. These highly repetitive arrays make BWA-MEM -50% slower. If you are concerned with the performance of BWA-MEM, you may consider to use option "-c2000 -m50". On simulated data, this setting helps the performance at a very minor cost on accuracy. I may consider to change the default in future releases. (0.7.7: 25 Feburary 2014, r441) Release 0.7.6 (31 Januaray, 2014) --------------------------------- Changes in BWA-MEM: * Changed the way mapping quality is estimated. The new method tends to give the same alignment a higher mapping quality. On paired-end reads, the change is minor as with pairing, the mapping quality is usually high. For short single-end reads, the difference is considerable. * Improved load balance when many threads are spawned. However, bwa-mem is still not very thread efficient, probably due to the frequent heap memory allocation. Further improvement is a little difficult and may affect the code stability. * Allow to use different clipping penalties for 5'- and 3'-ends. This helps when we do not want to clip one end. * Print the @PG line, including the command line options. * Improved the band width estimate: a) fixed a bug causing the band width extimated from extension not used in the final global alignment; b) try doubled band width if the global alignment score is smaller. Insufficient band width leads to wrong CIGAR and spurious mismatches/indels. * Added a new option -D to fine tune a heuristic on dropping suboptimal hits. Reducing -D increases accuracy but decreases the mapping speed. If unsure, leave it to the default. * Bugfix: for a repetitive single-end read, the reported hit is not randomly distributed among equally best hits. * Bugfix: missing paired-end hits due to unsorted list of SE hits. * Bugfix: incorrect CIGAR caused by a defect in the global alignment. * Bugfix: incorrect CIGAR caused by failed SW rescue. * Bugfix: alignments largely mapped to the same position are regarded to be distinct from each other, which leads to underestimated mapping quality. * Added the MD tag. There are no changes to BWA-backtrack in this release. However, it has a few known issues yet to be fixed. If you prefer BWA-track, It is still advised to use bwa-0.6.x. While I developed BWA-MEM, I also found a few issues with BWA-SW. It is now possible to improve BWA-SW with the lessons learned from BWA-MEM. However, as BWA-MEM is usually better, I will not improve BWA-SW until I find applications where BWA-SW may excel. (0.7.6: 31 January 2014, r432) Release 0.7.5a (30 May, 2013) ----------------------------- Fixed a bug in BWA-backtrack which leads to off-by-one mapping errors in rare cases. (0.7.5a: 30 May 2013, r405) Release 0.7.5 (29 May, 2013) ---------------------------- Changes in all components: * Improved error checking on memory allocation and file I/O. Patches provided by Rob Davies. * Updated README. * Bugfix: return code is zero upon errors. Changes in BWA-MEM: * Changed the way a chimeric alignment is reported (conforming to the upcoming SAM spec v1.5). With 0.7.5, if the read has a chimeric alignment, the paired or the top hit uses soft clipping and is marked with neither 0x800 nor 0x100 bits. All the other hits part of the chimeric alignment will use hard clipping and be marked with 0x800 if option "-M" is not in use, or marked with 0x100 otherwise. * Other hits part of a chimeric alignment are now reported in the SA tag, conforming to the SAM spec v1.5. * Better method for resolving an alignment bridging two or more short reference sequences. The current strategy maps the query to the reference sequence that covers the middle point of the alignment. For most applications, this change has no effects. Changes in BWA-backtrack: * Added a magic number to .sai files. This prevents samse/sampe from reading corrupted .sai (e.g. a .sai file containing LSF log) or incompatible .sai generated by a different version of bwa. * Bugfix: alignments in the XA:Z: tag were wrong. * Keep track of #ins and #del during backtracking. This simplifies the code and reduces errors in rare corner cases. I should have done this in the early days of bwa. In addition, if you use BWA-MEM or the fastmap command of BWA, please cite: - Li H. (2013) Aligning sequence reads, clone sequences and assembly contigs with BWA-MEM. arXiv:1303.3997v2 [q-bio.GN]. Thank you. (0.7.5: 29 May 2013, r404) Release 0.7.4 (23 April, 2013) ------------------------------ This is a bugfix release. Most of bugs are considered to be minor which only occur very rarely. * Bugfix: wrong CIGAR when a query sequence bridges three or more target sequences. This only happens when aligning reads to short assembly contigs. * Bugfix: leading "D" operator in CIGAR. * Extend more seeds for better alignment around tandem repeats. This is also a cause of the leading "D" operator in CIGAR. * Bugfix: SSE2-SSW may occasionally find incorrect query starting position around tandem repeat. This will lead to a suboptimal CIGAR in BWA-MEM and a wrong CIGAR in BWA. * Bugfix: clipping penalty does not work as is intended when there is a gap towards the end of a read. * Fixed an issue caused by a bug in the libc from Mac/Darwin. In Darwin, fread() is unable to read a data block longer than 2GB due to an integer overflow bug in its implementation. Since version 0.7.4, BWA-MEM is considered to reach similar stability to BWA-backtrack for short-read mapping. (0.7.4: 23 April, r385) Release 0.7.3a (15 March, 2013) ------------------------------- In 0.7.3, the wrong CIGAR bug was only fixed in one scenario, but not fixed in another corner case. (0.7.3a: 15 March 2013, r367) Release 0.7.3 (15 March, 2013) ------------------------------ Changes to BWA-MEM: * Bugfix: pairing score is inaccurate when option -A does not take the default value. This is a very minor issue even if it happens. * Bugfix: occasionally wrong CIGAR. This happens when in the alignment there is a 1bp deletion and a 1bp insertion which are close to the end of the reads, and there are no other substitutions or indels. BWA-MEM would not do a gapped alignment due to the bug. * New feature: output other non-overlapping alignments in the XP tag such that we can see the entire picture of alignment from one SAM line. XP gives the position, CIGAR, NM and mapQ of each aligned subsequence of the query. BWA-MEM has been used to align -300Gbp 100-700bp SE/PE reads. SNP/indel calling has also been evaluated on part of these data. BWA-MEM generally gives better pre-filtered SNP calls than BWA. No significant issues have been observed since 0.7.2, though minor improvements or bugs (e.g. the bug fixed in this release) are still possible. If you find potential issues, please send bug reports to (free registration required). In addition, more detailed description of the BWA-MEM algorithm can be found at . (0.7.3: 15 March 2013, r366) Release 0.7.2 (9 March, 2013) ----------------------------- Emergent bug fix: 0.7.0 and 0.7.1 give a wrong sign to TLEN. In addition, flagging 'properly paired' also gets improved a little. (0.7.2: 9 March 2013, r351) Release 0.7.1 (8 March, 2013) ----------------------------- Changes to BWA-MEM: * Bugfix: rare segmentation fault caused by a partial hit to the end of the last sequence. * Bugfix: occasional mis-pairing given an interleaved fastq. * Bugfix: wrong mate information when the mate is unmapped. SAM generated by BWA-MEM can now be validated with Picard. * Improved the performance and accuracy for ultra-long query sequences. Short-read alignment is not affected. Changes to other components: * In BWA-backtrack and BWA-SW, replaced the code for global alignment, Smith-Waterman and SW extension. The performance and accuracy of the two algorithms stay the same. * Added an experimental subcommand to merge overlapping paired ends. The algorithm is very conservative: it may miss true overlaps but rarely makes mistakes. An important note is that like BWA-SW, BWA-MEM may output multiple primary alignments for a read, which may cause problems to some tools. For aligning sequence reads, it is advised to use '-M' to flag extra hits as secondary. This option is not the default because multiple primary alignments are theoretically possible in sequence alignment. (0.7.1: 8 March 2013, r347) Beta Release 0.7.0 (28 Feburary, 2013) -------------------------------------- This release comes with a new alignment algorithm, BWA-MEM, for 70bp-1Mbp query sequences. BWA-MEM essentially seeds alignments with a variant of the fastmap algorithm and extends seeds with banded affine-gap-penalty dynamic programming (i.e. the Smith-Waterman-Gotoh algorithm). For typical Illumina 100bp reads or longer low-divergence query sequences, BWA-MEM is about twice as fast as BWA and BWA-SW and is more accurate. It also supports split alignments like BWA-SW and may optionally output multiple hits like BWA. BWA-MEM does not guarantee to find hits within a certain edit distance, but BWA is not efficient for such task given longer reads anyway, and the edit-distance criterion is arguably not as important in long-read alignment. In addition to the algorithmic improvements, BWA-MEM also implements a few handy features in practical aspects: 1. BWA-MEM automatically switches between local and glocal (global wrt reads; local wrt reference) alignment. It reports the end-to-end glocal alignment if the glocal alignment is not much worse than the optimal local alignment. Glocal alignment reduces reference bias. 2. BWA-MEM automatically infers pair orientation from a batch of single-end alignments. It allows more than one orientations if there are sufficient supporting reads. This feature has not been tested on reads from Illumina jumping library yet. (EXPERIMENTAL) 3. BWA-MEM optionally takes one interleaved fastq for paired-end mapping. It is possible to convert a name-sorted BAM to an interleaved fastq on the fly and feed the data stream to BWA-MEM for mapping. 4. BWA-MEM optionally copies FASTA/Q comments to the final SAM output, which helps to transfer individual read annotations to the output. 5. BWA-MEM supports more advanced piping. Users can now run: (bwa mem ref.fa '20) CPU cores. * Check I/O error. * Increased the maximum barcode length to 63bp. * Automatically choose the indexing algorithm. * Bugfix: very rare segfault due to an uninitialized variable. The bug also affects the placement of suboptimal alignments. The effect is very minor. This release involves quite a lot of tricky changes. Although it has been tested on a few data sets, subtle bugs may be still hidden. It is *NOT* recommended to use this release in a production pipeline. In future, however, BWA-SW may be better when reads continue to go longer. I would encourage users to try the 0.6 release. I would also like to hear the users' experience. Thank you. (0.6.0: 12 November 2011, r85) Beta Release 0.5.9 (24 January, 2011) ------------------------------------- Notable changes: * Feature: barcode support via the '-B' option. * Feature: Illumina 1.3+ read format support via the '-I' option. * Bugfix: RG tags are not attached to unmapped reads. * Bugfix: very rare bwasw mismappings * Recommend options for PacBio reads in bwasw help message. Also, since January 13, the BWA master repository has been moved to github: https://github.com/lh3/bwa The revision number has been reset. All recent changes will be first committed to this repository. (0.5.9: 24 January 2011, r16) Beta Release Candidate 0.5.9rc1 (10 December, 2010) --------------------------------------------------- Notable changes in bwasw: * Output unmapped reads. * For a repetitive read, choose a random hit instead of a fixed one. This is not well tested. Notable changes in bwa-short: * Fixed a bug in the SW scoring system, which may lead to unexpected gaps towards the end of a read. * Fixed a bug which invalidates the randomness of repetitive reads. * Fixed a rare memory leak. * Allowed to specify the read group at the command line. * Take name-grouped BAM files as input. Changes to this release are usually safe in that they do not interfere with the key functionality. However, the release has only been tested on small samples instead of on large-scale real data. If anything weird happens, please report the bugs to the bio-bwa-help mailing list. (0.5.9rc1: 10 December 2010, r1561) Beta Release 0.5.8 (8 June, 2010) --------------------------------- Notable changes in bwasw: * Fixed an issue of missing alignments. This should happen rarely and only when the contig/read alignment is multi-part. Very rarely, bwasw may still miss a segment in a multi-part alignment. This is difficult to fix, although possible. Notable changes in bwa-short: * Discard the SW alignment when the best single-end alignment is much better. Such a SW alignment may caused by structural variations and forcing it to be aligned leads to false alignment. This fix has not been tested thoroughly. It would be great to receive more users feedbacks on this issue. * Fixed a typo/bug in sampe which leads to unnecessarily large memory usage in some cases. * Further reduced the chance of reporting 'weird pairing'. (0.5.8: 8 June 2010, r1442) Beta Release 0.5.7 (1 March, 2010) ---------------------------------- This release only has an effect on paired-end data with fat insert-size distribution. Users are still recommended to update as the new release improves the robustness to poor data. * The fix for 'weird pairing' was not working in version 0.5.6, pointed out by Carol Scott. It should work now. * Optionally output to a normal file rather than to stdout (by Tim Fennel). (0.5.7: 1 March 2010, r1310) Beta Release 0.5.6 (10 Feburary, 2010) -------------------------------------- Notable changes in bwa-short: * Report multiple hits in the SAM format at a new tag XA encoded as: (chr,pos,CIGAR,NM;)*. By default, if a paired or single-end read has 4 or fewer hits, they will all be reported; if a read in a anomalous pair has 11 or fewer hits, all of them will be reported. * Perform Smith-Waterman alignment also for anomalous read pairs when both ends have quality higher than 17. This reduces false positives for some SV discovery algorithms. * Do not report "weird pairing" when the insert size distribution is too fat or has a mean close to zero. * If a read is bridging two adjacent chromsomes, flag it as unmapped. * Fixed a small but long existing memory leak in paired-end mapping. * Multiple bug fixes in SOLiD mapping: a) quality "-1" can be correctly parsed by solid2fastq.pl; b) truncated quality string is resolved; c) SOLiD read mapped to the reverse strand is complemented. * Bwa now calculates skewness and kurtosis of the insert size distribution. * Deploy a Bayesian method to estimate the maximum distance for a read pair considered to be paired properly. The method is proposed by Gerton Lunter, but bwa only implements a simplified version. * Export more functions for Java bindings, by Matt Hanna (See: http://www.broadinstitute.org/gsa/wiki/index.php/Sting_BWA/C_bindings) * Abstract bwa CIGAR for further extension, by Rodrigo Goya. (0.5.6: 10 Feburary 2010, r1303) Beta Release 0.5.5 (10 November, 2009) -------------------------------------- This is a bug fix release: * Fixed a serious bug/typo in aln which does not occur given short reads, but will lead to segfault for >500bp reads. Of course, the aln command is not recommended for reads longer than 200bp, but this is a bug anyway. * Fixed a minor bug/typo which leads to incorrect single-end mapping quality when one end is moved to meet the mate-pair requirement. * Fixed a bug in samse for mapping in the color space. This bug is caused by quality filtration added since 0.5.1. (0.5.5: 10 November 2009, r1273) Beta Release 0.5.4 (9 October, 2009) ------------------------------------ Since this version, the default seed length used in the "aln" command is changed to 32. Notable changes in bwa-short: * Added a new tag "XC:i" which gives the length of clipped reads. * In sampe, skip alignments in case of a bug in the Smith-Waterman alignment module. * In sampe, fixed a bug in pairing when the read sequence is identical to its reverse complement. * In sampe, optionally preload the entire FM-index into memory to reduce disk operations. Notable changes in dBWT-SW/BWA-SW: * Changed name dBWT-SW to BWA-SW. * Optionally use "hard clipping" in the SAM output. (0.5.4: 9 October 2009, r1245) Beta Release 0.5.3 (15 September, 2009) --------------------------------------- Fixed a critical bug in bwa-short: reads mapped to the reverse strand are not complemented. (0.5.3: 15 September 2009, r1225) Beta Release 0.5.2 (13 September, 2009) --------------------------------------- Notable changes in bwa-short: * Optionally trim reads before alignment. See the manual page on 'aln -q' for detailed description. * Fixed a bug in calculating the NM tag for a gapped alignment. * Fixed a bug given a mixture of reads with some longer than the seed length and some shorter. * Print SAM header. Notable changes in dBWT-SW: * Changed the default value of -T to 30. As a result, the accuracy is a little higher for short reads at the cost of speed. (0.5.2: 13 September 2009, r1223) Beta Release 0.5.1 (2 September, 2009) -------------------------------------- Notable changes in the short read alignment component: * Fixed a bug in samse: do not write mate coordinates. Notable changes in dBWT-SW: * Randomly choose one alignment if the read is a repetitive. * Fixed a flaw when a read is mapped across two adjacent reference sequences. However, wrong alignment reports may still occur rarely in this case. * Changed the default band width to 50. The speed is slower due to this change. * Improved the mapping quality a little given long query sequences. (0.5.1: 2 September 2009, r1209) Beta Release 0.5.0 (20 August, 2009) ------------------------------------ This release implements a novel algorithm, dBWT-SW, specifically designed for long reads. It is 10-50 times faster than SSAHA2, depending on the characteristics of the input data, and achieves comparable alignment accuracy while allowing chimera detection. In comparison to BLAT, dBWT-SW is several times faster and much more accurate especially when the error rate is high. Please read the manual page for more information. The dBWT-SW algorithm is kind of developed for future sequencing technologies which produce much longer reads with a little higher error rate. It is still at its early development stage. Some features are missing and it may be buggy although I have evaluated on several simulated and real data sets. But following the "release early" paradigm, I would like the users to try it first. Other notable changes in BWA are: * Fixed a rare bug in the Smith-Waterman alignment module. * Fixed a rare bug about the wrong alignment coordinate when a read is poorly aligned. * Fixed a bug in generating the "mate-unmap" SAM tag when both ends in a pair are unmapped. (0.5.0: 20 August 2009, r1200) Beta Release 0.4.9 (19 May, 2009) --------------------------------- Interestingly, the integer overflow bug claimed to be fixed in 0.4.7 has not in fact. Now I have fixed the bug. Sorry for this and thank Quan Long for pointing out the bug (again). (0.4.9: 19 May 2009, r1075) Beta Release 0.4.8 (18 May, 2009) --------------------------------- One change to "aln -R". Now by default, if there are no more than '-R' equally best hits, bwa will search for suboptimal hits. This change affects the ability in finding SNPs in segmental duplications. I have not tested this option thoroughly, but this simple change is less likely to cause new bugs. Hope I am right. (0.4.8: 18 May 2009, r1073) Beta Release 0.4.7 (12 May, 2009) --------------------------------- Notable changes: * Output SM (single-end mapping quality) and AM (smaller mapping quality among the two ends) tag from sam output. * Improved the functionality of stdsw. * Made the XN tag more accurate. * Fixed a very rare segfault caused by integer overflow. * Improve the insert size estimation. * Fixed compiling errors for some Linux systems. (0.4.7: 12 May 2009, r1066) Beta Release 0.4.6 (9 March, 2009) ---------------------------------- This release improves the SOLiD support. First, a script for converting SOLiD raw data is provided. This script is adapted from solid2fastq.pl in the MAQ package. Second, a nucleotide reference file can be directly used with 'bwa index'. Third, SOLiD paired-end support is completed. Fourth, color-space reads will be converted to nucleotides when SAM output is generated. Color errors are corrected in this process. Please note that like MAQ, BWA cannot make use of the primer base and the first color. In addition, the calculation of mapping quality is also improved a little bit, although end-users may barely observe the difference. (0.4.6: 9 March 2009, r915) Beta Release 0.4.5 (18 Feburary, 2009) -------------------------------------- Not much happened, but I think it would be good to let the users use the latest version. Notable changes (Thank Bob Handsaker for catching the two bugs): * Improved bounary check. Previous version may still give incorrect alignment coordinates in rare cases. * Fixed a bug in SW alignment when no residue matches. This only affects the 'sampe' command. * Robustly estimate insert size without setting the maximum on the command line. Since this release 'sampe -a' only has an effect if there are not enough good pairs to infer the insert size distribution. * Reduced false PE alignments a little bit by using the inferred insert size distribution. This fix may be more important for long insert size libraries. (0.4.5: 18 Feburary 2009, r829) Beta Release 0.4.4 (15 Feburary, 2009) -------------------------------------- This is mainly a bug fix release. Notable changes are: * Imposed boundary check for extracting subsequence from the genome. Previously this causes memory problem in rare cases. * Fixed a bug in failing to find whether an alignment overlapping with N on the genome. * Changed MD tag to meet the latest SAM specification. (0.4.4: 15 Feburary 2009, r815) Beta Release 0.4.3 (22 January, 2009) ------------------------------------ Notable changes: * Treat an ambiguous base N as a mismatch. Previous versions will not map reads containing any N. * Automatically choose the maximum allowed number of differences. This is important when reads of different lengths are mixed together. * Print mate coordinate if only one end is unmapped. * Generate MD tag. This tag encodes the mismatching positions and the reference bases at these positions. Deletions from the reference will also be printed. * Optionally dump multiple hits from samse, in another concise format rather than SAM. * Optionally disable iterative search. This is VERY SLOOOOW, though. * Fixed a bug in generate SAM. (0.4.3: 22 January 2009, r787) Beta Release 0.4.2 (9 January, 2009) ------------------------------------ Aaron Quinlan found a bug in the indexer: the bwa indexer segfaults if there are no comment texts in the FASTA header. This is a critical bug. Nothing else was changed. (0.4.2: 9 January 2009, r769) Beta Release 0.4.1 (7 January, 2009) ------------------------------------ I am sorry for the quick updates these days. I like to set a milestone for BWA and this release seems to be. For paired end reads, BWA also does Smith-Waterman alignment for an unmapped read whose mate can be mapped confidently. With this strategy BWA achieves similar accuracy to maq. Benchmark is also updated accordingly. (0.4.1: 7 January 2009, r760) Beta Release 0.4.0 (6 January, 2009) ------------------------------------ In comparison to the release two days ago, this release is mainly tuned for performance with some tricks I learnt from Bowtie. However, as the indexing format has also been changed, I have to increase the version number to 0.4.0 to emphasize that *DATABASE MUST BE RE-INDEXED* with 'bwa index'. * Improved the speed by about 20%. * Added multi-threading to 'bwa aln'. (0.4.0: 6 January 2009, r756) Beta Release 0.3.0 (4 January, 2009) ------------------------------------ * Added paired-end support by separating SA calculation and alignment output. * Added SAM output. * Added evaluation to the documentation. (0.3.0: 4 January 2009, r741) Beta Release 0.2.0 (15 Augusst, 2008) ------------------------------------- * Take the subsequence at the 5'-end as seed. Seeding strategy greatly improves the speed for long reads, at the cost of missing a few true hits that contain many differences in the seed. Seeding also increase the memory by 800MB. * Fixed a bug which may miss some gapped alignments. Fixing the bug also slows the speed a little. (0.2.0: 15 August 2008, r428) Beta Release 0.1.6 (08 Augusst, 2008) ------------------------------------- * Give accurate CIGAR string. * Add a simple interface to SW/NW alignment (0.1.6: 08 August 2008, r414) Beta Release 0.1.5 (27 July, 2008) ---------------------------------- * Improve the speed. This version is expected to give the same results. (0.1.5: 27 July 2008, r400) Beta Release 0.1.4 (22 July, 2008) ---------------------------------- * Fixed a bug which may cause missing gapped alignments. * More clearly define what alignments can be found by BWA (See manual). Now BWA runs a little slower because it will visit more potential gapped alignments. * A bit code clean up. (0.1.4: 22 July 2008, r387) Beta Release 0.1.3 (21 July, 2008) ---------------------------------- Improve the speed with some tricks on retrieving occurences. The results should be exactly the same as that of 0.1.2. (0.1.3: 21 July 2008, r382) Beta Release 0.1.2 (17 July, 2008) ---------------------------------- Support gapped alignment. Codes for ungapped alignment has been removed. (0.1.2: 17 July 2008, r371) Beta Release 0.1.1 (03 June, 2008) ----------------------------------- This is the first release of BWA, Burrows-Wheeler Alignment tool. Please read man page for more information about this software. (0.1.1: 03 June 2008, r349)