pdf package:grDevices R Documentation(latin1) _P_D_F _G_r_a_p_h_i_c_s _D_e_v_i_c_e _D_e_s_c_r_i_p_t_i_o_n: 'pdf' starts the graphics device driver for producing PDF graphics. _U_s_a_g_e: pdf(file = ifelse(onefile, "Rplots.pdf", "Rplot%03d.pdf"), width, height, onefile, family, title, fonts, version, paper, encoding, bg, fg, pointsize, pagecentre, colormodel, useDingbats, useKerning) _A_r_g_u_m_e_n_t_s: file: a character string giving the name of the file. For use with 'onefile=FALSE' give a C integer format such as '"Rplot%03d.pdf"' (the default in that case). (See 'postscript' for further details.) width, height: the width and height of the graphics region in inches. The default values are '7'. onefile: logical: if true (the default) allow multiple figures in one file. If false, generate a file with name containing the page number for each page. Defaults to 'TRUE'. family: the font family to be used, see 'postscript'. Defaults to '"Helvetica"'. title: title string to embed as the '/Title' field in the file. Defaults to '"R Graphics Output"'. fonts: a character vector specifying R graphics font family names for fonts which will be included in the PDF file. Defaults to 'NULL'. version: a string describing the PDF version that will be required to view the output. This is a minimum, and will be increased (with a warning) if necessary. Defaults to '"1.4"', but see 'Details'. paper: the target paper size. The choices are '"a4"', '"letter"', '"legal"' (or '"us"') and '"executive"' (and these can be capitalized), or '"a4r"' and '"USr"' for rotated ('landscape'). The default is '"special"', which means that the 'width' and 'height' specify the paper size. A further choice is '"default"'; if this is selected, the papersize is taken from the option '"papersize"' if that is set and as '"a4"' if it is unset or empty. Defaults '"special"'. encoding: the name of an encoding file. See 'postscript' for details. Defaults to '"default"'. bg: the initial background color to be used. Defaults to '"transparent"'. fg: the initial foreground color to be used. Defaults to '"black"'. pointsize: the default point size to be used. Strictly speaking, in bp, that is 1/72 of an inch, but approximately in points. Defaults to '12'. pagecentre: logical: should the device region be centred on the page? - is only relevant for 'paper != "special"'. Defaults to true. colormodel: a character string describing the color model: currently allowed values are '"rgb"', '"gray"' and '"cmyk"'. Defaults to '"rgb"'. useDingbats: logical. Should small circles be rendered _via_ the Dingbats font? Defaults to 'TRUE', which produces smaller and better output. Setting this to 'FALSE' can work around font display problems in broken PDF viewers. See the 'Note' for a possible fix for such viewers. useKerning: logical. Should kerning corrections be included in setting text and calculating string widths? Defaults to 'TRUE'. _D_e_t_a_i_l_s: All arguments except 'file' default to values given by 'pdf.options()'. The ultimate defaults are quoted in the arguments section. 'pdf()' opens the file 'file' and the PDF commands needed to plot any graphics requested are sent to that file. The 'file' argument is interpreted as a C integer format as used by 'sprintf', with integer argument the page number. The default gives files 'Rplot001.pdf', ..., 'Rplot999.pdf', 'Rplot1000.pdf', .... The 'family' argument can be used to specify a PDF-specific font family as the initial/default font for the device. If a device-independent R graphics font family is specified (e.g., via 'par(family=)' in the graphics package), the PDF device makes use of the PostScript font mappings to convert the R graphics font family to a PDF-specific font family description. (See the documentation for 'pdfFonts'.) R does _not_ embed fonts in the PDF file, so it is only straightforward to use mappings to the font families that can be assumed to be available in any PDF viewer: '"Times"' (equivalently '"serif"'), '"Helvetica"' (equivalently '"sans"') and '"Courier"' (equivalently '"mono"'). Other families may be specified, but it is the user's responsibility to ensure that these fonts are available on the system and third-party software, e.g., Ghostscript, may be required to embed the fonts so that the PDF can be included in other documents (e.g., LaTeX): see 'embedFonts'. The URW-based families described for 'postscript' can be used with viewers set up to use URW fonts, which is usual with those based on 'xpdf' or Ghostscript. Since 'embedFonts' makes use of Ghostscript, it should be able to embed the URW-based families for use with other viewers. See 'postscript' for details of encodings, as the internal code is shared between the drivers. The native PDF encoding is given in file 'PDFDoc.enc'. 'pdf' writes uncompressed PDF. It is primarily intended for producing PDF graphics for inclusion in other documents, and PDF-includers such as 'pdftex' are usually able to handle compression. The PDF produced is fairly simple, with each page being represented as a single stream. The R graphics model does not distinguish graphics objects at the level of the driver interface. The 'version' argument declares the version of PDF that gets produced. The version must be at least 1.4 for semi-transparent output to be understood, and at least 1.3 if CID fonts are to be used: if these features are used the version number will be increased (with a warning). Specifying a low version number is useful if you want to produce PDF output that can be viewed on older or non-Adobe PDF viewers. (PDF 1.4 requires Acrobat 5 or later.) Line widths as controlled by 'par(lwd=)' are in multiples of 1/96 inch. Multiples less than 1 are allowed. 'pch="."' with 'cex = 1' corresponds to a square of side 1/72 inch, which is also the 'pixel' size assumed for graphics parameters such as '"cra"'. The 'paper' argument sets the '/MediaBox' entry in the file, which defaults to 'width' by 'height'. If it is set to something other than '"special"', a device region of the specified size is (by default) centred on the rectangle given by the paper size: if either 'width' or 'height' is less than '0.1' or too large to give a total margin of 0.5 inch, it is reset to the corresponding paper dimension minus 0.5. Thus if you want the default behaviour of 'postscript' use 'pdf(paper="a4r", width=0, height=0)' to centre the device region on a landscape A4 page with 0.25 inch margins. When the background colour is fully transparent (as is the initial default value), the PDF produced does not paint the background. Almost all PDF viewers will use a white canvas so the visual effect is if the background were white. This will not be the case when printing onto coloured paper, though. _C_o_l_o_r _m_o_d_e_l_s: The default color model is RGB, and model '"gray"' maps RGB colors to greyscale using perceived luminosity (biased towards green). '"cmyk"' outputs in CMYK colorspace. Nothing in R specifies the interpretation of the RGB or CMYK color spaces, and the simplest possible conversion to CMYK is used (). _C_o_n_v_e_n_t_i_o_n_s: This section describes the implementation of the conventions for graphics devices set out in the "R Internals Manual". * The default device size is 7 inches square. * Font sizes are in big points. * The default font family is Helvetica. * Line widths are as a multiple of 1/96 inch, with no minimum. * Circles of any radius are allowed. Unless 'useDingbats = FALSE', opaque circles of less than 10 big points radius are rendered using char 108 in the Dingbats font: all semi-transparent and larger circles using a Bezier curve for each quadrant. * Colours are interpreted by the viewing/printing application. _N_o_t_e: If you see problems with PDF output, do remember that the problem is much more likely to be in your viewer than in R. Try another viewer if possible. Symptoms for which the viewer has been at fault are apparent grids on image plots (turn off graphics anti-aliasing in your viewer if you) and missing or incorrect glyphs in text (viewers silently doing font substitution). Unfortunately the default viewers on most Linux and Mac OS X systems have these problems, and no obvious way to turn off graphics anti-aliasing. Acrobat Reader does not use the fonts specified but rather emulates them from multiple-master fonts. This can be seen in imprecise centering of characters, for example the multiply and divide signs in Helvetica. This can be circumvented by embedding fonts where possible. Most other viewers substitute fonts, e.g. URW fonts for the standard Helvetica and Times fonts, and these too often have different font metrics from the true fonts. Acrobat Reader 5.x and later can be extended by support for Asian and (so-called) Central European fonts, and these will be needed for the full use of encodings other than Latin-1. See for Reader 6.x to 8.x, and for 9.x. On some systems the default plotting character 'pch = 1' is displayed in some PDF viewers incorrectly as a '"q"' character. (These seem to be viewers based on the 'poppler' PDF rendering library). This may be due to incorrect or incomplete mapping of font names to those used by the system. Adding the following lines to '~/.fonts.conf' or '/etc/fonts/local.conf' may circumvent this problem. ZapfDingbats Dingbats _S_e_e _A_l_s_o: 'pdfFonts', 'pdf.options', 'embedFonts', 'Devices', 'postscript'. 'cairo_pdf' and (on Mac OS X only) 'quartz' for other devices that can produce PDF. More details of font families and encodings and especially handling text in a non-Latin-1 encoding and embedding fonts can be found in Paul Murrell and Brian Ripley (2006) Non-standard fonts in PostScript and PDF graphics. _R News_, 6(2):41-47. . _E_x_a_m_p_l_e_s: ## Not run: ## Test function for encodings TestChars <- function(encoding="ISOLatin1", ...) { pdf(encoding=encoding, ...) par(pty="s") plot(c(-1,16), c(-1,16), type="n", xlab="", ylab="", xaxs="i", yaxs="i") title(paste("Centred chars in encoding", encoding)) grid(17, 17, lty=1) for(i in c(32:255)) { x <- i %% 16 y <- i %/% 16 points(x, y, pch=i) } dev.off() } ## there will be many warnings. TestChars("ISOLatin2") ## this does not view properly in older viewers. TestChars("ISOLatin2", family="URWHelvetica") ## works well for viewing in gs-based viewers, and often in xpdf. ## End(Not run)