Home

Commission

Projects

Courses

People

Publications

Sponsors

 

 

Peer-refereed Journal Papers

 

 

Books

 

 

Book chapters

 

 

Refereed Conference Papers

 

  • W.D. Leslie, S. Yang, Y. Luo, A.L. Goertzen and L.M. Lix (2017). Fracture Risk Indices from DXA-Based Finite Element Analysis Stratify Incident Fracture Risk Independently from FRAX: The Manitoba BMD Registry. ASBMR (American Society of Bone and Mineral Research) Annual Meeting, September 8 – 11, Denver, USA.
  • Y. Luo and W.D. Leslie (2017). Assessment of hip fracture risk with image-based three-level biomechanical model. 2017 CMBEC Conference, Winnipeg, May 23 – 26, 2017.
  • S. O’Brien, Y. Luo and J.-M. Brandt (2017). Validation of computational wear model for total knee replacement polyethylene wear prediction. 2017 CMBEC Conference, Winnipeg, May 23 – 26, 2017.
  • H. Yang and Y. Luo (2017). Study of the correlation between QCT and DXA derived femur cross-sectional mechanical properties. 33rd Annual Meeting of the Canadian Biomaterial Society, May 24 – 27, 2017.
  • S. Yang, W.D. Leslie, Y. Luo, A.L. Goertzen, L.M. Ward, and L.M. Lix (2016). Fracture risk indices from DXA-based finite element analysis stratify hip fracture better than femoral neck BMD: a cross-sectional validation study. ASBMR- 2016, Atlanta, GA, USA, 16 – 19 September, 2016.
  • Y. Luo (2016). Yield-strain-energy is a better discriminator of hip fractures than BMD. 24th International Congress of Theoretical and Applied Mechanics, Montreal, Canada, August 21 – 26, 2016.
  • Y. Luo, M. Nasiri Sarvi and W.D. Leslie (2016). Understanding hip fracture by two-level biomechanical modeling of sideways fall. World Congress on Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (WCO-IOF-ESCEO 2016), April 14 – 17, 2016, Malaga, Spain.
  • Y. Luo, H. Yang, S. Yang, A.L. Goertzen, L. Lix and W.D. Leslie (2016). Is femur cross-section stiffness a better surrogate of bone strength than geometry? World Congress on Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (WCO-IOF-ESCEO 2016), April 14 – 17, 2016, Malaga, Spain.
  • S. O’Brien, Y. Luo and J.-M. Brandt (2015). Computational wear simulation of total knee replacements. BioMedConf-2015, University of Manitoba, Winnipeg, Canada, October 30, 2015.
  • H. Kheirollahi and Y. Luo (2015). Assessment of hip fracture risk using cross-section strain energy determined by QCT-based finite element modeling. BioMedConf-2015, University of Manitoba, Winnipeg, Canada, October 30, 2015.
  • I. Khosravipour, Y. Luo and U. Wyss (2015). Stress analysis of articulating surfaces of surface-guided knee implant using finite element method. BioMedConf-2015, University of Manitoba, Winnipeg, Canada, October 30, 2015.
  • M. Nasiri Sarvi and Y. Luo (2015). Subject-specific prediction of hip fracture risk by a two-level biomechanical model. BioMedConf-2015, University of Manitoba, Winnipeg, Canada, October 30, 2015.
  • Y. Luo, H. Yang, L. Targownik, A. Goertzen and W.D. Leslie (2015). A preliminary study of DXA and QCT derived femur cross-section stiffness. 2015 2nd International Conference on Applied Mechanics and Mechanical Automation (AMMA2015), April 19-20, Hong Kong, 2015.
  • M. Nasiri Sarvi and Y. Luo (2015). A compound risk indicator for subject-specific prediction of hip fracture in sideways fall. ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2015), Boston, August 2 – 5, 2015.
  • Y. Luo and Y. Long (2015). Estimation of femur cortical bone thickness from hip DXA image. AES-ATEMA 23rd International Conference on Advances and Trends in Engineering Materials and Their Applications, Prince Edward Island, July 6 – 10, 2015.
  • H. Kheirollahi and Y. Luo (2015). Identification of high stress regions in proximal femur during single-leg stance and sideways fall using QCT-based finite element model. ICBBE 2015: XIII International Conference on Biophysical and Biomedical Engineering, Istanbul, Turkey, August 17-18, 2015.
  • I. Khosravipour, Y. Luo, S. Pejhan, U.P. Wyss (2015). Contact stress analysis of surface guided knee implant. Proceedings of the 25th CANCAM, London, Ontario, Canada, May 31 – June 4, 2015.
  • L. Targownik, Y. Luo, A. Goertzen and W.D. Leslie (2015). Comparing Bone Structure and Bone Metabolism between Long-Term Proton Pump Inhibitor Users and Non-Users. DDW-2015.
  • T.R. Faisal and Y. Luo (2015). QCT image-based FEA demonstrating stress distributions at femoral neck region during single stance loading and sideways fall. International Symposium on Biomedical Imaging: from Nano to Macro. April 16 – 19, New York, 2015.
  • S. O’Brien, Y. Luo and J.-M. Brandt (2015). In-Vitro and In-Silico Investigations on the Influence of Contact Pressure on Cross-linked Polyethylene Wear in Total Knee Replacements. Wear of Materials, Toronto, Canada.
  • S.T. O’Brien, E.R. Bohm, M.J. Petrak, U.P. Wyss, Y. Luo, J.-M. Brandt (2014). Computational Polyethylene Wear Modeling of Total Knee Replacements: A Time Dependent Cross Shear and Energy Dissipation Approach. Orthopaedic Research Society (ORS) 2014 Annual Meeting, Hyatt Regency, New Orleans, USA.
  • O’Brien, S., Bohm, E., Petrak, M., Wyss, U., Luo, Y., Brandt, J-M. (2014). “Computational Polyethylene Wear Model Development and Evaluation for Total Knee Replacements”, International Conference on BioTribology, Toronto, Canada, 2014. (Proceedings and Podium Presentation, International)
  • Y. Luo and Z. Liang (2013). Sport Helmet Design and Virtual Impact Test by Image-based Finite Element Modeling. The 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’13), Osaka, Japan, July 3 – 7, 2013.
  • Y. Luo and W.D. Leslie (2013). Investigation of Repeatability in Hip Fracture Risk Predicted by DXA-based Finite Element Model. The 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’13), Osaka, Japan, July 3 – 7, 2013.
  • Y. Luo and Z. Ferdous and J. Ouyang (2013). Finite Element Study of Factors Affecting Osteoporotic Hip Fracture. AES-ATEMA’2013 Thirteen International Conference on Advances and Trends in Engineering Materials and their Applications, Montreal, Canada, June 3 – 7, 2013.
  • Y. Luo and Z. Liang (2013). Finite Element Modeling of Traumatic Brain Injury       Considering Pointwise Material Inhomogeneity. AES-ATEMA’2013 Thirteen International Conference on Advances and Trends in Engineering Materials and their Applications, Montreal, Canada, June 3 – 7, 2013.
  • M. Nasirisarvi and Y. Luo (2013). Estimation of body segment masses using whole-body DXA image. Proceedings of the 24th CANCAM Saskatoon, Saskatchewan, Canada, June 2 – 6, 2013.
  • S. Kazembakhshi, Y. Luo and S. Cenkowski (2013). Determination of Bone Anisotropy Orientations Using CT Images. Proceedings of the 24th CANCAM Saskatoon, Saskatchewan, Canada, June 2 – 6, 2013.
  • Y. Luo (2013). Image-based finite element modeling and its application in injury analysis. International Conference and Exhibition on Mechanical & Aerospace Engineering, September 30 – October 2, San Antonio, Texas, USA.(abstract)
  • M. Makki, Y. Luo, P. Sun and J. Ouyang (2012). Prediction of Impact Force in Falling of the Elderly by Subject Specific Multibody Dynamics Model Developed From Whole-Body DXA Image. Proceedings of The Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, Winnipeg, Manitoba, Canada.

·       Z. Liang and Y. Luo (2012). A Finite Element Model with Improved Material Biofidelity for Brain Injury Analysis. Proceedings of The Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, Winnipeg, Manitoba, Canada.

·       Z. Ferdous, Y. Luo, Q. Zhang and W.D. Leslie (2012). Development of DXA-based Patient Specific Finite Element Model for Longitudinal Monitoring of Osteoporotic Fracture Risk. Proceedings of The Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, Winnipeg, Manitoba, Canada.

·       S. O’Brien, J.-M. Brandt, Y. Luo and Q. C. Wu (2012). Finite Element Material Modeling of UHMWPE: Rigid Body vs Deformable Body Modeling. Proceedings of The Canadian Society for Mechanical Engineering International Congress 2012, June 4-6, Winnipeg, Manitoba, Canada.

·       S. O’Brien, Y. Luo, C. Wu and J. Brandt (2011). Wear analysis of total knee replacement by finite element simulation. Proceedings of the 23rd CANCAM, Vancouver, BC, Canada, June 5 – 9.

·       S. O’Brien, J.-M. Brandt, Y. Luo and C. Wu (2011). The development of a wear model for the prediction of wear in total knee replacements by finite element simulation. Proceedings of Simortho, Rostock, Germany.

·       S. O’Brien, J.-M. Brandt, Y. Luo and C. Wu (2011). Wear model development for the articular and backside surfaces of a total knee replacement. Proceedings of Leeds-Lyon Symposium of Tribology, Lyon, France.

·       Z. Ferdous, Y. Luo and Q. Zhang (2011). Finite element analysis of human bone (femur) remodelling using ANSYS. Proceedings of the 23rd CANCAM, Vancouver, BC, Canada, June 5 – 9. 

·       P. Zhang, C.N. Wu and Y. Luo (2011). Prediction of osteoporotic fractures by DXA-based finite element procedure. Proceedings of the 23rd CANCAM, Vancouver, BC, Canada, June 5 – 9.

·       Y. Luo and Z. Liang (2011). A non-segmentation finite element model for studying traumatic brain injuries. International Workshop on Computational Mechanics, Materials and Engineering Applications, Kunming, China, July 23 – 24.

·       Y. Luo, Z. Ferdous and W.D. Leslie (2011). Assessment of Osteoporotic Fracture Risk by DXA-Based Patient-Specific Finite Element Modeling. International Workshop on Computational Mechanics, Materials and Engineering Applications, Kunming, China, July 23 – 24.

·       Y. Luo (2010). Two-scale finite element model for failure analysis of non-crimp fabric (NCF) composite materials. 18th European Conference on Fracture, Dresden, Germany, Aug. 30 ~ Sept. 3.

·       Z. Li and Y. Luo (2010). A tentative procedure for measuring absolute intracranial pressure. CSME Forum 2010, Victoria, Canada, June 7~9.

·       H. Chen and Y. Luo (2010). Numerical investigations of several factors affecting brain injury. CSME Forum 2010, Victoria, Canada, June 7~9.

·       Y. Luo (2010). On several challenges in finite element modeling of closed head injuries. CSME Forum 2010, Victoria, Canada, June 7~9.

·       Y. Luo and Z. Liang (2010). Analysis of non-crimp fabric (NCF) composites by combining continuum and meso-scale model. CSME Forum 2010, Victoria, Canada, June 7~9.

·       Y. Luo, Z. Li and Q. Zhang (2009). Evaluation of intracranial pressure using non-invasive procedure based on finite element simulation. 10th US National Congress on Computational Mechanics, Columbus, Ohio, USA, July 16 ~ 19.

·       Y. Luo (2009). Mechanical Property Characterization of Graphene Sheet Based on Energy Equivalence between Models of Different Scales. 10th US National Congress on Computational Mechanics, Columbus, Ohio, USA, July 16 ~ 19.

·       Y. Luo (2009). Fracture analysis with adaptive nearest-nodes finite element method. 12th International Conference on Fracture, Ottawa, Ontario, Canada, July 12-17.

·       Y. Luo and H. Chen (2009). Analysis of heterogeneous materials by adaptive finite element method. 22nd Canadian Congress of Applied Mechanics, Halifax, Nova Scotia, Canada, May 31 – June 4.

·       Y. Luo (2009). Progressive collapse analysis of frame structures based on energy criterion. 22nd Canadian Congress of Applied Mechanics, Halifax, Nova Scotia, Canada, May 31 – June 4.

·       Y. Luo (2009). Adaptive nearest-nodes finite element method and its applications. International Symposium on Computational Structural Engineering, Shanghai, China, June 22-24.

·       Y. Luo (2008). Computer Modeling System for Analysis and Design of Electrical Transmission Line under High Intensity Wind. CSME Forum 2008, Ottawa, Ontario, Canada, June 5-8.

·       Y. Luo (2007). Efficient 3D co-rotational beam element and its application in nonlinear Analysis of electric transmission towers. 21st Canadian Congress of Applied Mechanics, Toronto, Ontario, Canada, June 3-7.

·       Y. Luo (2007). A Generalized Finite Element Method with Moving Polynomial Interpolation. 21st Canadian Congress of Applied Mechanics, Toronto, Ontario, Canada, June 3-7.

·       L. Ge, L.Q. Lee, Z. Li, C. Ng, K. Ko K, Y. Luo, M.S. Shephard (2004). Adaptive mesh refinement for high accuracy wall loss determination in accelerating cavity design. Eleventh Biennial IEEE Conference on Electromagnetic Field Computation, Seoul, Korea, June 6-9.

·       Y. Luo, I. Malik, Z. Li, M. Shephard and K. Ko (2003). Adaptive mesh refinement in accelerator modeling with Omega3P. 7th U.S. National Congress on Computational Mechanics, Sandia National Laboratory, July 28 – 30.

·       L. Ge, L.-Q. Lee, Z. Li, C. Ng, I. Ur Rahman, Y. Sun, K. Ko (SLAC), Y. Luo, M. Shephard (RPI) (2003). Accurate wall loss determination in accelerator design. Particle Accelerator Conference (PAC 03), Portland, Oregon.

·       Y. Luo and U. Häussler-Combe (2001). An adaptive strategy based on strain-energy-density gradient and its application in meshless method. International Workshop on Meshfree Methods for Partial Differential Equations, Sept. 11-14, Bonn, Germany.

·       U. Häussler-Combe and Y. Luo (2001). Numerical evaluation of size effect in concrete structures. The Second European Conference of Computational Mechanics (ECCM-2001), Cracow, Poland, June 26-29.

·       Y. Luo and U. Häussler-Combe (2001). A generalized finite difference method and its application to structural mechanics. The Second European Conference of Computational Mechanics (ECCM-2001), Cracow, Poland, June 26-29.

·       A. Eriksson, Y. Luo and C. Pacoste (1999). Computer algebra investigation of equivalence in 4-node plane stress/strain finite elements. CASC-99, Munich, Germany, May 31 – June 4.

·       A. Eriksson, Y. Luo and C. Pacoste (1999). Application of symbolic computer algebra to dealing with finite element formulations. IMACS-ACA’99, El Escorial, Spain, June 24-27.

·       A. Eriksson and Y. Luo (1999). Computer algebra in the derivation of field-consistent finite elements. The First European Conference of Computational Mechanics (ECCM-1999), Munich, Germany, August 31 – September 3.

·       Y. Luo and A. Eriksson (1999). An attempt to standardize finite element derivation with Maple, The 12-th Nordic Conference on Computational Mechanics, Helsingfors, Finland, October 24 – 26.

·       Y. Luo (1998). An 8-node solid element with ‘optimal’ reduced integration and averaged Jacobian, The 11-th Nordic Conference on Computational Mechanics, Stockholm, Oct. 15-17.

·       Y. Luo (1997). Field consistence approach with application to the development of finite element, presented at 10-th Nordic Conference on Computational Mechanics, Tallinn, Oct. 24-25.

 

 

 

 Address: E1-444, E1-409 EITC, 75A Chancellor’s Circle, Winnipeg, MB R3T 5V6, Canada