Selected Journal Publications

  1. Soliman, H., Shalaby, A.; “Permanent Deformation Behavior of Unbound Granular Base Materials with Varying Moisture and Fines Content”, Transportation Geotechnics, Elsevier, Volume 3, 2015.
  2. Liu, Q., Shalaby, A., “Relating Concrete Pavement Noise and Friction to Three-Dimensional Texture Parameters”, International Journal of Pavement Engineering, 2015.
  3. Kavanagh, L., and Shalaby, A., "Implementation of a Strain-Based Policy for Managing Weight Restrictions During the Spring: Low-Volume Roads in Manitoba, Canada", Transportation Research Records, Journal of the Transportation Research Board, TRR 2474, 149-153, June 2015
  4. Soliman, H., Shalaby, A.; “Characterizing the performance of cementitious partial-depth repair materials in cold climates”, Construction and Building Materials, Elsevier, Volume 70, Pages 148-157, November 2014.
  5. Kavanagh, L.; Shalaby, A.; “Validating spring weight restriction limits with mechanistic–empirical failure prediction models: low-volume roads in Manitoba, Canada”, Transportation Research Record: Journal of the Transportation Research Board, TRR 2349, 108-117, 2013
  6. Liu, Q.; Shalaby, A.; “Simulation of pavement response to tire pressure and shape of contact area”, Canadian Journal of Civil Engineering, NRC Research Press, Vol: 40, 3: 236-242, 2013.
  7. Soliman, H.; Shalaby, A.; “Characterizing the elastic behaviour of fine-grained subgrade soils under traffic loading”, International Journal of Pavement Engineering, Taylor & Francis, DOI: 10.1080/10298436.2013.857773, pp. 1-10, 2013
  8. Kavanagh, L.; Shalaby, A.; “Mechanistic–empirical damage analysis and impacts of reduced tire pressure on thaw weakened flexible pavements using the AI and MEPDG models”, Canadian Journal of Civil Engineering, NRC Research Press, Vol. 39, 7:812-823, 2012
  9. El Gendy, A.; Shalaby, A.; Saleh, M.; Flintsch, G.; “Stereo-vision applications to reconstruct the 3D texture of pavement surface”, International Journal of Pavement Engineering, Taylor & Francis, 12, 3:263-273, 2011
  10. Liu, Q.; Kavanagh, L.; Shalaby, A.; “Impacts of Reduced Tire Pressure on Strain Response of Thaw-Weakened, Low-Volume Roads in Manitoba, Canada”, Transportation Research Record: Journal of the Transportation Research Board, TRR 2203, 186-193, 2011
  11. Soliman, H., Shalaby, A., Characterizing the low temperature performance of hot-pour bituminous sealants using glass transition temperature and dynamic stiffness modulus, Journal of Materials in Civil Engineering, American Society of Civil Engineers (ASCE), Vol. 21, No. 11, November 2009, pp. 688-693.
  12. Harran, G. and Shalaby, A. Improving the prediction of the dynamic modulus of fine-graded asphalt concrete mixtures at high temperatures, Canadian Journal of Civil Engineering, 36(2): 180-190, 2009. pdf
  13. El Gendy, A., and Shalaby, A., Image requirements for three dimensional measurements of pavement macrotexture, Transportation Research Records 2068, pp 126-134, Transportation Research Board, 2008.
  14. Soliman, H., Shalaby, A., and Kavanagh, L., Performance evaluation of joint and crack sealants in cold climates using DSR and BBR tests, Journal of Materials in Civil Engineering, American Society of Civil Engineers (ASCE), Vol. 20, No. 7, pp. 470-477, July 2008.
  15. El Gendy, A., and Shalaby, A., Mean profile depth of pavement surface macrotexture using photometric stereo techniques, Journal of Transportation Engineering, American Society of Civil Engineers (ASCE), Vol. 133, 7:433-440, July 2007.
  16. Shalaby, A. and Reggin, A., optimization of manual and automated network level pavement condition ratings based on transverse variability and neural networks, the Canadian Journal of Civil Engineering,Volume 34, Number 2:139-146, February 2007. pdf
  17. Murison, W.S., Shalaby, A., and Mufti, A.A., Concrete-filled glass fibre reinforced polymer (GFRP) dowels for load transfer in jointed rigid pavements, Transportation Research Record 1919, pp. 54-64, Transportation Research Board, 2005.
  18. Shalaby, A., and Khan, R., Design of unsurfaced roads constructed with large-size shredded rubber tires: a case study, Journal of Resources, Conservation and Recycling, Elsevier Publishing, The Netherlands, 2005, 44:318-332.
  19. Shalaby, A, Law, T., and Kavussi, A., Analysis of well-graded and fine-graded asphalt mixes using the indirect tensile test and resilient modulus test,, International Journal of Pavements, Jan-May 2004, pp. 14-26.
  20. Reggin, A., and Shalaby, A., Reduced tire inflation pressure to improve the performance of low volume unsurfaced roads, International Journal of Pavements, University of Mississippi, Vol. 2-1, pp. 29-40, May 2003.
  21. Shalaby, A., and Khan, R., Temperature monitoring and compressibility measurement of a shredded tire road in Manitoba Transportation Research Record 1808, pp. 67-75, Transportation Research Board, 2003.
  22. Shalaby, A., and Reggin, A., Surface rutting of thin pavements and gravel roads under standard and reduced tire inflation pressures, the Canadian Journal of Civil Engineering, 29: 679-691, Oct. 2002.
  23. Shalaby, A., Modelling short term aging of asphalt binders using the rolling thin film oven test, Canadian Journal of Civil Engineering, 29: 135-144, Feb. 2002. pdf
  24. Eddie, D., Shalaby, A., and Rizkalla, S., FRP dowels for concrete pavements, ACI Structural Journal, Vol. 98, No. 2, pp. 201-206, March 2001. pdf
  25. Zhi, X., Shalaby, A., Middleton, D., and Clayton A., Evaluation of weigh-in-motion in Manitoba, Canadian Journal of Civil Engineering, Vol. 26:5, pp. 655-666, October 1999. pdf
  26. Easa, S., Shalaby, A., and Abd El Halim, A.O. Reliability-based model for predicting pavement thermal cracking Journal of Transportation Engineering, American Society of Civil Engineers, 122(5), 374-380, 1996.
  27. Shalaby, A., Abd El Halim, A.O., and Easa, S.M. Low temperature stresses and fracture analysis of asphalt overlays Transportation Research Record 1539, 131-138, Washington D.C., 1996.

Selected Refereed Publications

  1. Liu, Q., Esfandiarpour, S., and Shalaby, A. Three-Dimensional Surface Texture of Asphalt Pavements Containing Reclaimed Asphalt Concrete. The 9th International Conference on Managing Pavement Assets, Washington, D.C. May 2015.
  2. Liu, Q., Shalaby, A., Assessing Surface Texture and Pavement Performances Using 3‐Dimensional Parameters from Photometric Stereo Technique. Presented at 93nd Annual Meeting of the Transportation Research Board (TRB), Washington D.C., 2014.
  3. Kavanagh, L., Soliman, H., Shalaby, A., Toward Best Practices for Construction and Maintenance of Through-grade Culverts to Mitigate Pavement Roughness in Cold Climates. presented at 93nd Annual Meeting of the Transportation Research Board (TRB), Washington D.C., 2014.
  4. Liu, Q. and Shalaby, A. Volumetric Moisture Content Analysis and the Implementation of Spring Load Restrictions of Low Volume Road. Manuscript ID 168 Accepted for Presentation at Airfield and Highway Pavement Conference, the American Society of Civil Engineering, Los Angeles, CA, June 2013.
  5. Soliman, H., and Shalaby, A. "Performance-Based Evaluation Criteria for Cementitious Partial-Depth Repair Materials in Cold Climates: II. Laboratory Performance" presented at 92nd Annual Meeting of the Transportation Research Board (TRB), Washington D.C., 2013.
  6. Lambert, J.L., Shalaby, A., and Enieb, M., Wettability, surface tension and surface free energy behavior of short-term aging and liquid antistrips modified HMA binders, International Journal of Pavements Conference, Sao Paolo, Brazil, Dec 2013.
  7. Lambert, J.L., Shalaby, A., and Enieb, M., Effect of moisture conditioning on creep compliance and resilient modulus of asphalt concrete, International Journal of Pavements Conference, Sao Paolo, Brazil, Dec 2013.
  8. Soliman, H., and Shalaby, A., “Developing pavement design inputs for fine-grained subgrade soils,” Annual Meeting of Transportation Research Board, January 2011.
  9. El Gendy, A., and Shalaby, A., Using quality control charts to segment road surface condition data, International conference on managing paving assets, ICMPA 2008, Calgary, AB, June 2008. pdf slides
  10. Reggin, A., Shalaby, A., Emanuels, R., and St. Michel, G., Urban considerations for using road roughness to manage road networks International conference on managing paving assets, ICMPA 2008, Calgary, AB, June 2008.
  11. Mah, V., Elgendy A., and Shalaby, A., and Hughesman, M. Characterizing pavement surface texture using the photometric stereo technique, 2008 Transportation Systems Workshop, Phoenix, Az, April 2008.
  12. Soliman, H., and Shalaby, A., Glass transition temperature and low-temperature stiffness of hot-pour bituminous sealants, Annual Meeting of Transportation Research Board, CD-ROM, January 2008.
  13. El Gendy, A., and Shalaby, A., Image requirements for three dimensional measurements of pavement macrotexture, Annual Meeting of Transportation Research Board, CD-ROM, January 2008.
  14. Worms, T., Shalaby, A., and Kavanagh, L. Optimization of joint and crack sealant selection criteria based on laboratory and field performance, Proceedings of the International Conference on Asphalt Pavements, International Society for Asphalt Pavements, Quebec City, QC, August 2006.
  15. Shalaby, A., and Reggin, A., Maximum likelihood classification of pavement surface condition data in urban road networks, Annual Meeting of Transportation Research Board, January 2006.
  16. Worms, T., and Shalaby, A., Accelerated laboratory evaluation of joint sealants under cyclic loads, Annual Meeting of Transportation Research Board, January 2005.
  17. Reggin, A., and Shalaby, A., Optimizing visual and automated pavement condition surveys using analysis of transverse variability and artificial neural networks, Annual Meeting of Transportation Research Board, CD-ROM, January 2005.
  18. Thiessen, M., Shalaby, A., and Kavanagh, L., Rutting of asphalt pavements in Manitoba and relationship to strength and deformation properties Annual Meeting of Transportation Research Board, January 2002.
  19. Shalaby, A., and Murison S.W., Using glass FRP bars and concrete filled tubular sections as load transfer devices in jointed concrete pavements Seventh International Conference on Concrete Pavements, Vol. 2, pp. 607-621, Orlando, FL, 2001.
  20. Shalaby, A., Abd El Halim, A.O., and Easa, S.M. Behaviour of asphalt pavements under repeated tensile strains, RILEM Fourth International Conference on Reflective Cracking in Pavements, Ottawa, ON, RILEM Publications, 185-194, 2000.
  21. Shalaby, A., and Fréchette, L., Reflective cracking on C-SHRP long term pavement performance sites, RILEM Fourth International Conference on Reflective Cracking in Pavements, Ottawa, ON, RILEM Publications, 241-250, 2000.
  22. Shalaby, A., Easa, S., and Abd El Halim, A.O. Thermal fatigue testing of asphalt pavement overlays Proceedings of the Fifth International Conference on Bearing Capacity of Roads and Airfields, Vol. II, 1099-1106, Norway, July 1998.
  23. Shalaby, A., Easa, S., and Abd El Halim, A.O. Accelerated test method for thermal fatigue of asphalt pavement overlays Structural Faults and Repairs-97, Edinburgh, Scotland, Vol. 3, 151-158, 1997.
  24. Abd El Halim, A.O., Razaqpur, A.G., Shalaby, A., Farha, M., and Argue, G. Compressive and tensile properties of crack sealants under different temperatures ASCE/CSCE International Conference on Engineering Materials, Vol. II, 651-662, Ottawa, 1997.
  25. Shalaby, A., Abd El Halim, A.O. and Easa, S.M. Influence of thermal stresses on construction-induced cracks RILEM Third International Conference on Reflection Cracking, Maastricht, The Netherlands, (ed. E. Beuving and L.Franchen), E & FN Spon, 30-39, 1996.

Conference Proceedings

  1. Liu, Q., kavanagh, L., and Shalaby, A. “Instrumented pavement responses under standard and reduced tire pressures” Annual Conference of the Transportation Association of Canada, Halifax, NS, September 2010. 
  2. Soliman, H. and Shalaby, A. “Sensitivity of subgrade resilient modulus to moisture variation” Annual Conference of the Transportation Association of Canada, Halifax, NS, September 2010. 
  3. Liu, Q., Kavanagh, L., and Shalaby, A.“Using thawing indices to predict the start date of spring load restrictions : a case study” Annual conference of the Canadian Society of Civil Engineering, Winnipeg, MB, June 2010 
  4. Shalaby, A., and El Gendy, A., “Digital image analysis: current practice of pavement texture measurement” Annual conference of the Canadian Society of Civil Engineering, Winnipeg, MB, June 2010 
  5. Kavanagh, L., Shalaby, A., and Deane, L., “A demonstration project for micro-surfacing preservation treatment” Annual conference of the Canadian Society of Civil Engineering, Winnipeg, MB, June 2010
  6. El Gendy, A. and Shalaby, A., Macrotexture measurements using photometric stereo technique, Annual Conference of the Transportation Association of Canada, Vancouver, BC, October 2009.
  7. Soliman, H, Shalaby, A, Kass, S, and Ng, T. Characterizing the soil resilient modulus for typical Manitoba soils, Annual Conference of the Transportation Association of Canada, Vancouver, BC, October 2009.
  8. Crowder, J, Shalaby, A., Clayton, A., and Van Cauwenberghe, R., Assessing spring load restrictions using climate change and mechanistic-empirical distress models, Annual Conference of the Transportation Association of Canada, Toronto, ON, September 2008.
  9. Soliman, H. and Shalaby, A., Criteria for selection of joint and crack sealants based on laboratory performance, Annual Conference of the Transportation Association of Canada, Saskatoon, SK, September 2007.
  10. Soliman, H., and Shalaby, A. "Laboratory characterization of hot-pour joint sealants performance in cold climates" Canadian Society for Civil Engineering (CSCE) Annual General Meeting and Conference, Yellowknife, Northwest Territories, June 2007.
  11. Harran, G. and Shalaby, A. Dynamic modulus of asphalt concrete in uniaxial compression and indirect tension modes Canadian Society for Civil Engineering (CSCE) Annual General Meeting and Conference, Yellowknife, Northwest Territories, June 2007.
  12. Harran, G. and Shalaby, A. Variability of dynamic modulus of asphalt concrete measured in uniaxial compression and indirect tension, Canadian Society for Civil Engineering (CSCE) Annual General Meeting and Conference, Yellowknife, Northwest Territories, June 2007.
  13. El Gendy, A and Shalaby, A. "Pavement texture classification using two dimensional Fourier transform of image-based recovered surface," Canadian Society for Civil Engineering (CSCE) Annual General Meeting and Conference, Yellowknife, Northwest Territories, June 2007.
  14. Stoyko, D., Soliman, H., Shalaby, A., and Popplewell, N. Subsurface crack detection in concrete using ground penetrating radar and stress wave pulse-echo techniques Proceeding of International Conference on Aeronautical Science and Air Transportation (ICASAT 2007), April 2007.
  15. Worms, T., Shalaby, A., and Kavanagh, L., Criteria for selection of joint and crack sealants based on laboratory performance, Annual Conference of the Transportation Association of Canada, Calgary, AB, September 2005.
  16. Worms, T., Shalaby, A., and Kavanagh, L., Criteria for selection of joint and crack sealants based on laboratory performance, Annual Conference of the Transportation Association of Canada, Calgary, AB, September 2005.
  17. El Gendy, A and Shalaby, A., Detecting localized roughness using dynamic segmentation, First Annual Inter-University Symposium of Infrastructure Management (AISIM-1), University of Waterloo, Waterloo, ON, August 2005.
  18. Murison, W.S., Shalaby, A., and Mufti, A.A., Laboratory evaluation of concrete-filled GFRP dowels in jointed concrete pavements, Proceeding of the annual Transportation Association of Canada Conference, CD-ROM, Quebec City, QC, Sept 2004.
  19. Worms, T., and Shalaby, A., Simulating the long term performance of joint sealants under cyclic loading conditions, Annual Conference of the Canadian Society for Civil Engineering, Saskatoon, SK, 2004.
  20. Reggin, A., and Shalaby, A., Automating the process of analyzing and validating Pavement surface condition data, Annual Conference of the Canadian Society for Civil Engineering, Saskatoon, SK, 2004.
  21. Reggin, A., Shalaby, A., and Bradley, A., Evaluation of damage to rural roads during the Saskatchewan central tire inflation experiment, Proceeding of the annual Transportation Association of Canada Conference, CD-ROM, Winnipeg, MB, Sept 2002.
  22. Law, T., Shalaby, A., Hilderman, S., and Kass, S. Resilient modulus of asphalt paving mixtures in Manitoba, Proceeding of the annual Transportation Association of Canada Conference, CD-ROM, Winnipeg, MB, Sept 2002.
  23. Reggin, A., and Shalaby, A., Evaluation of rutting trends in the Big Quill Saskatchewan reduced tire pressure experiment, Annual Conference of the Canadian Society for Civil Engineering, Montreal, QC, 2002.
  24. Khan, R. A., and Shalaby, A. Performance of a road base constructed with shredded rubber tires, Annual Conference of the Canadian Society for Civil Engineering, Montreal, QC, 2002
  25. Wensel, M., Shalaby, A., Thiessen, M., and Mah, V., Investigation of asphalt pavement rutting at two Canadian Airfields, Annual conference of the Canadian Society for Civil Engineering, Montreal, QC, 2002
  26. Law, T., Shalaby, A., Watson, D., Hilderman, S., and Kass, S. Evaluation of typical asphalt paving mixtures in Manitoba, Annual Conference of the Canadian Society for Civil Engineering, Montreal, QC, 2002
  27. Murison, S., Shalaby, A., and Mufti, A. Modelling of concrete pavement dowel-slab interaction, Annual Conference of the Canadian Society for Civil Engineering, Montreal, QC, 2002
  28. Murison, S., Shalaby, A. and Smith, T., Ultra-thin whitetopping in Canada: state-of-practice, Annual Conference of the Canadian Society for Civil Engineering, Montreal, QC, 2002
  29. Cuhadar, A., Shalaby, A., and Tasdoken, S. Automatic segmentation of pavement condition data using wavelet transform, Canadian Conference on Electrical and Computer Engineering, Winnipeg, MB, May 2002.
  30. Khan, R. and Shalaby, A. Recycling of shredded rubber tires as road base in Manitoba: a case study, Canadian Geotechnical Conference, Calgary, AB, September 2001.
  31. Thiessen, M., Shalaby, A., and Kavanagh, L., Strength testing of in-service pavements and correlation to rutting, Proceedings of Canadian Technical Asphalt Association, (ed. E. Thompson), Polyscience Publications Inc., Vol. XLV, 203-227, 2000.
  32. Shalaby, A., Applications of dynamic segmentation to pavement condition data, Al-azhar Engineering International Conference, Cairo, Egypt, September 2000.
  33. Kennedy, J., Shalaby, A., and Van Cauwenberghe, R., Dynamic segmentation of pavement condition data, Annual conference of the Canadian Society for Civil Engineering, London, ON, 2000.
  34. Shalaby, A., Shredded rubber tires as road base, WorldWise 99, Winnipeg, MB, December 1999.
  35. Eddie, D., Shalaby, A., Rizkalla, S., FRP dowels for concrete pavements, WorldWise 99, Winnipeg, MB, December 1999.
  36. Shalaby, A., C-SHRP first generation models, Annual conference of the transportation association of Canada, Saint John, NB, September 1999.
  37. Shalaby, A., and Lew, K.H. Update of C-SHRP first generation models" Annual conference of the Canadian Society for Civil Engineering, Vol. IV, 409-418, Regina, SK, 1999.
  38. Lew, K.H., Clayton, A., and Shalaby, A., Rationalizing spring load restrictions in the prairie region" Annual conference of the Canadian Society for Civil Engineering, Vol. IV, 379-388, Regina, SK, 1999.
  39. Eddie, D., Rizkalla, S., and Shalaby, A., FRP dowels for concrete pavements, ACI convention, Los Angeles, CA, October 1998.
  40. Shalaby, A., Easa, S.M. and Abd El Halim, A.O. Investigation of thermal cracking on C-shrp test sections, 2nd Transportation Specialty Conference, Canadian Society for Civil Engineering, Vol. IVa, pp. 85-94, Halifax, June 1998.
  41. Shalaby, A., Abd El Halim, A.O. and Easa, S.M. Reliability based pavement performance modelling for Canadian conditions, Al-Azhar Engineering Fifth International Conference, Cairo, Egypt, Vol. 4, pp. 398-409, December 19-22, 1997.
  42. Shalaby, A., Abd El Halim, A.O. and Easa, S.M. Damage propagation in asphalt pavements at low temperatures Annual Conference, Canadian Society for Civil Engineering, Sherbrooke, Quebec, Vol. 5, pp. 363-372, May 1997.
  43. Skabova, I., Svec, O., Shalaby, A., and Abd El Halim, A.O. Laboratory results of comparison between Marshall and Gyratory compaction methods, Proceedings of Canadian Technical Asphalt Association, Edmonton, Alberta, (ed. E. Thompson), Polyscience Publications Inc., Vol. XLI, pp. 349-362, 1996.
  44. Shalaby, A., Easa, S., and Abd El Halim, A.O. Effect of crack position on transverse cracking of asphalt pavements Paving in cold areas (PICA-6) Canada-Japan workshop, Vol. 1, 299-316, Niigata, Japan, 1996.
  45. Shalaby, A., Abd El Halim, A.O. and Easa, S.M. Thermally induced cracks in asphalt pavements: analytical and experimental studies 1st Transportation Conference, Canadian Society for Civil Engineering, Vol. IIIb, pp. 101-110, Edmonton, June 1996.
  46. Nabi, R.M., Aleem, A., Shalaby, A., and Easa, S.M. Transverse cracking of curved asphalt pavement highways 1st Transportation Specialty Conference, Canadian Society for Civil Engineering, Edmonton, Alberta, Vol. IIIb, pp. 93-99, June 1996.
  47. Shalaby, A., Easa, S.M., and Abd El Halim, A.O. Thermal stress analysis of asphalt overlays Al-Azhar Engineering Fourth International Conference, Al-Azhar University, Cairo, Egypt, Vol. 4, pp. 385-394, December, 1995.
  48. Shalaby, A., and Easa, S. Modeling pavement thermal cracking: sensitivity analysis Annual conference, Canadian Society for Civil Engineering, Ottawa, Ontario, Vol. IV, pp. 285-294, June 1995.